Approach for the Critical Chloride Content of RC structuresThe chloride content, which can lead to corrosion of the reinforcement in concrete, is defined as the critical chloride content. This critical chloride content determines the extent of repair measures and thus the costs significantly. Numerous laboratory and structure investigations show, that the critical chloride content depends on many parameter and thus can not be a fixed values. Hence it is reasonable to determine a lower value of the critical chloride content by evaluating the depassivation probability linked with a low probability (e.g. 5% fractile value) of corrosion under given circumstances. The evaluation of numerous investigations shows that the approach of 0.5 mass % relative to cement content corresponds with an acceptably low probability of corrosion considering given circumstances. This is in accordance with the German Guideline for Protection and Repair Measures for RC-structures under practical conditions.
Unter den meisten Bedingungen sind zementgebundene Baustoffe in Trinkwasser beständig. Sehr weiches bzw. kalkarmes Wasser kann jedoch die Dauerhaftigkeit von Betonoberflächen beeinträchtigen. Auslaugungsprozesse zwischen Werkstoff und Wasser führen langfristig zur Aufweichung der Oberfläche und der einhergehende Alkalitätsverlust kann bei unzureichender Betondeckung zur Korrosion der Bewehrung führen. Im Rahmen eines DVGW‐geförderten Forschungsprojekts wurden Betonoberflächen einer mehrmonatigen Auslaugungsbeanspruchung in kalkfreiem Wasser ausgesetzt und die oberflächliche Veränderung der Proben anhand verschiedener materialtechnischer Parameter verfolgt. Die Ergebnisse erlauben direkte Rückschlüsse auf den Schädigungsmechanismus, die Auslaugungsgeschwindigkeit sowie das Schädigungsprofil. Die Ergebnisse werden mit Bezug zu den maßgeblichen Einflussparametern der verschieden porösen Betonoberflächen auf ihren Auslaugungswiderstand sowie die Bedeutung für die Dauerhaftigkeit von Betonoberflächen in Trinkwasserbehältern diskutiert.
Die Kombination der physikalischen Eigenschaften eines hochwärmedämmenden Leichtbetons mit den optischen Eigenschaften eines modernen Architekturbetons ermöglicht Bauwerke, bei denen der Ausdruck des Baustoffs Beton mit den energetischen Anforderungen an Außenbauteile vereint werden kann. Ziel des an der Technischen Universität Kaiserslautern durchgeführten Forschungsvorhabens war die Entwicklung eines hochwärmedämmenden Leichtbetons für monolithische Außenbauteile mit Sichtbetonqualität. Der unter Nachhaltigkeitsgesichtspunkten entwickelte Infraleichtbeton aus rezykliertem Blähglas und portlandzementklinkerarmem Hochofenzement konnte die hohen Anforderungen hinsichtlich Rohdichte, Dauerhaftigkeit und Wärmeleitfähigkeit erfüllen. Der selbstverdichtende Leichtbeton musste widersprüchliche Anforderungen, wie z. B. ausreichende Druckfestigkeit bei geringer Rohdichte sowie geringe Wasseraufnahme trotz aufgeschäumter Zementmatrix, erfüllen. Die selbstverdichtenden Fließeigenschaften ohne Entmischung wurden durch den Einsatz eines PCE‐Fließmittels in Kombination mit einem Stabilisator erreicht. Der durch Schaumbildner aufgeschäumten Zementmatrix wurden zur Verbesserung der Dauerhaftigkeit schwindreduzierende und hydrophobierende Zusatzmittel zugegeben. Bei Trockenrohdichten deutlich unter 700 kg/m³ wurde ein Wärmeleitfähigkeitswert von λ = 0,15 W/(m·K) erreicht. Die Übertragbarkeit der im Labormaßstab gewonnenen Erkenntnisse auf Bauwerksverhältnisse wurde durch den Bau eines Experimentalgebäudes aus Infraleichtbeton auf dem Gelände der Technischen Universität Kaiserslautern überprüft. Kontinuierliche Messungen mit eingebauten Multiringsensorelektroden (MRSE) geben Aufschluss über Temperatur‐ und Feuchtigkeitsverläufe, um eine abschließende Aussage über die Eigenschaften des Infraleichtbetons bei natürlicher Bewetterung treffen zu können. High thermal insulating Infra lightweight concrete –experimental building constructed with weight‐optimized exposed concrete Combining the physical characteristics of lightweight concrete that provides highly efficient heat insulation with the appearance of a state‐of‐the‐art architectural concrete makes it possible to construct buildings that merge the expression of concrete with the energy efficiency specifications for external structural components. The aim of the research project conducted by the University of Kaiserslautern was the development of highly insulating monolithic lightweight concrete construction components made of exposed concrete. The composition of the Infra lightweight concrete, (i. e. recycled expanded glass and blast furnace cement reduced in Portland cement clinker) developed with regard to sustainability aspects, had to meet high requirements in terms of bulk density, durability and thermal conductivity. The self‐compacting lightweight concrete had to reconcile conflicting requirements, such as a sufficiently high compressive strength and a low bulk density, as well as a low water absorption rate despite the expanded cement matrix. The self‐compacting ...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.