No abstract

This review article aims to summarize the potential of using renewable natural resources, such as lignin and tannin, in the preparation of NIPUs for wood adhesives. Polyurethanes (PUs) are extremely versatile polymeric materials, which have been widely used in numerous applications, e.g., packaging, footwear, construction, the automotive industry, the lighting industry, insulation panels, bedding, furniture, metallurgy, sealants, coatings, foams, and wood adhesives. The isocyanate-based PUs exhibit strong adhesion properties, excellent flexibility, and durability, but they lack renewability. Therefore, this study focused on the development of non-isocyanate polyurethane lignin and tannin resins for wood adhesives. PUs are commercially synthesized using polyols and polyisocyanates. Isocyanates are toxic, costly, and not renewable; thus, a search of suitable alternatives in the synthesis of polyurethane resins is needed. The reaction with diamine compounds could result in NIPUs based on lignin and tannin. The research on bio-based components for PU synthesis confirmed that they have good characteristics as an alternative for the petroleum-based adhesives. The advantages of improved strength, low curing temperatures, shorter pressing times, and isocyanate-free properties were demonstrated by lignin- and tannin-based NIPUs. The elimination of isocyanate, associated with environmental and human health hazards, NIPU synthesis, and its properties and applications, including wood adhesives, are reported comprehensively in this paper. The future perspectives of NIPUs’ production and application were also outlined.

Lignins are the most important aromatic renewable natural resource today, serving as a sustainable, environmentally acceptable alternative feedstock to fossil‐derived chemicals and polymers in a vast scope of value‐added applications. Lignin is a biopolymeric molecule that, together with cellulose, is a fundamental component of higher vascular plants structural cell walls. It can be extracted from by‐products of the pulp and paper industries, agricultural waste and residues, and biorefinery products. Lignin properties may vary depending on source and extraction method with carbon and aromatic as the main compositions in lignin structure. These rich compositions make lignin more valuable, allowing for the creation of high‐value‐added green composites. However, the complex structure of lignin creates low reactivity to interact with crosslinker, and hence chemical modification is substantial to overcome this problem. This review aimed to present and discuss lignin structure, variation of lignin chemical properties regarding its source and extraction process, recent advances in chemical modification of lignin to enhance its reactivity, and potential applications of modified lignin for manufacturing value‐added biocomposites with enhanced properties and lower environmental impact, such as food handling/packaging, seed coating, automotive devices, 3D printing, rubber industry, and wood adhesives.

Asian countries have abundant resources of natural fibers, but unfortunately, they have not been optimally utilized. The facts showed that from 2014 to 2020, there was a shortfall in meeting national demand of over USD 2.75 million per year. Therefore, in order to develop the utilization and improve the economic potential as well as the sustainability of natural fibers, a comprehensive review is required. The study aimed to demonstrate the availability, technological processing, and socio-economical aspects of natural fibers. Although many studies have been conducted on this material, it is necessary to revisit their potential from those perspectives to maximize their use. The renewability and biodegradability of natural fiber are part of the fascinating properties that lead to their prospective use in automotive, aerospace industries, structural and building constructions, bio packaging, textiles, biomedical applications, and military vehicles. To increase the range of applications, relevant technologies in conjunction with social approaches are very important. Hence, in the future, the utilization can be expanded in many fields by considering the basic characteristics and appropriate technologies of the natural fibers. Selecting the most prospective natural fiber for creating national products can be assisted by providing an integrated management system from a digitalized information on potential and related technological approaches. To make it happens, collaborations between stakeholders from the national R&D agency, the government as policy maker, and academic institutions to develop national bioproducts based on domestic innovation in order to move the circular economy forward are essential.

Biocomposites reinforced with natural fibers represent an eco-friendly and inexpensive alternative to conventional petroleum-based materials and have been increasingly utilized in a wide variety of industrial applications due to their numerous advantages, such as their good mechanical properties, low production costs, renewability, and biodegradability. However, these engineered composite materials have inherent downsides, such as their increased flammability when subjected to heat flux or flame initiators, which can limit their range of applications. As a result, certain attempts are still being made to reduce the flammability of biocomposites. The combustion of biobased composites can potentially create life-threatening conditions in buildings, resulting in substantial human and material losses. Additives known as flame-retardants (FRs) have been commonly used to improve the fire protection of wood and biocomposite materials, textiles, and other fields for the purpose of widening their application areas. At present, this practice is very common in the construction sector due to stringent fire safety regulations on residential and public buildings. The aim of this study was to present and discuss recent advances in the development of fire-resistant biocomposites. The flammability of wood and natural fibers as material resources to produce biocomposites was researched to build a holistic picture. Furthermore, the potential of lignin as an eco-friendly and low-cost FR additive to produce high-performance biocomposites with improved technological and fire properties was also discussed in detail. The development of sustainable FR systems, based on renewable raw materials, represents a viable and promising approach to manufacturing biocomposites with improved fire resistance, lower environmental footprint, and enhanced health and safety performance.

The efficient isolation process and understanding of lignin properties are essential to determine key features and insights for more effective lignin valorization as a renewable feedstock for the production of bio-based chemicals including wood adhesives. This study successfully used dilute acid precipitation to recover lignin from black liquor (BL) through a single-step and ethanol-fractionated-step, with a lignin recovery of ~35% and ~16%, respectively. The physical characteristics of lignin, i.e., its morphological structure, were evaluated by scanning electron microscopy (SEM). The chemical properties of the isolated lignin were characterized using comprehensive analytical techniques such as chemical composition, solubility test, morphological structure, Fourier-transform infrared spectroscopy (FTIR), 1H and 13C Nuclear Magnetic Resonance (NMR), elucidation structure by pyrolysis-gas chromatography-mass spectroscopy (Py-GCMS), and gel permeation chromatography (GPC). The fingerprint analysis by FTIR detected the unique peaks corresponding to lignin, such as C=C and C-O in aromatic rings, but no significant differences in the fingerprint result between both lignin. The 1H and 13C NMR showed unique signals related to functional groups in lignin molecules such as methoxy, aromatic protons, aldehyde, and carboxylic acid. The lower insoluble acid content of lignin derived from fractionated-step (69.94%) than single-step (77.45%) correlated to lignin yield, total phenolic content, solubility, thermal stability, and molecular distribution. It contradicted the syringyl/guaiacyl (S/G) units’ ratio where ethanol fractionation slightly increased syringyl unit content, increasing the S/G ratio. Hence, the fractionation step affected more rupture and pores on the lignin morphological surface than the ethanol-fractionated step. The interrelationships between these chemical and physicochemical as well as different isolation methods were investigated. The results obtained could enhance the wider industrial application of lignin in manufacturing wood-based composites with improved properties and lower environmental impact.

No abstract

After cellulose, lignin is the most commonly used natural polymer in green biomaterials. Pulp and paper mills and emerging cellulosic biorefineries are the main sources of technical lignin. However, only 2–5% of lignin has been converted into biomaterials. Making lignin-based polymer biocomposites to replace petroleum-based composites has piqued the interest of many researchers worldwide due to the positive environmental impact of traditional composites over time. In composite development, lignin is being used as a filler in commercial polymers to improve biodegradability and possibly lower production costs. As a natural polymer, lignin may have different properties depending on the isolation method and source, affecting polymer-based composites. The application has been affected by the characteristics of lignin and the uniform distribution of lignin in polymers. The review’s goal was to provide an overview of technical lignin extraction, properties, and its potential appropriate utilization. It was also planned to revisit the lignin-based composites’ preparation procedure as well as their composite characteristics. Solvent casting and extrusion methods are used to fabricate lignin from polymeric matrices such as polypropylene, epoxy, polyvinyl alcohol, polylactic acid, starch, wood fiber, natural rubber, and chitosan. Packaging, biomedical materials, automotive, advanced biocomposites, flame retardant, and other applications for lignin-based composites has existed. As a result, the technology is still being refined to increase the performance of lignin-based biocomposites in several applications. This review could assist explain lignin’s position as a composite additive, which could lead to more efficient processing and application strategies.