PurposeThe paper seeks to study, theoretically, the performance characteristics of capillary compensated multi‐recessed hydrostatic journal bearings operating with micropolar lubricant. The finite element method is used to solve the modified Reynolds' equation governing the micropolar lubricant flow in the clearance space of a hydrostatic journal bearing. The performance characteristics of bearing operating with micropolar lubricant are presented and compared with that of Newtonian lubricant, for a wide range of non‐dimensional load, capillary restrictor design parameter and micropolar parameters.Design/methodology/approachThe modified Reynolds' equation governing the flow of the micropolar lubricant is solved along with restrictor flow equation by finite element method so as to obtain fluid‐film pressures. The iterative procedure is repeated until the converged solution for the fluid‐film pressure field is obtained.FindingsA study of four‐pocket hydrostatic journal bearing system capillary compensated and operating with micropolar lubricant is presented. The following conclusions are made from the results presented in this study: at a constant load, pocket pressures and minimum film thickness, stiffness coefficients and, the damping coefficients increase with increase in micropolar effect of lubricant as compared to the Newtonian lubricant; the influence of the micropolar parameters of lubricant is more significant upon the minimum fluid‐film thickness at higher values of load and lower values of restrictor design parameter; the non‐dimensional flow decreases with increase in the micropolar effect of the lubricant a given values of restrictor design parameter and load; and the stiffness coefficient in the direction of load is found to be influenced by the micropolar parameters and more significantly at lower values of restrictor design parameter and load.Originality/valueStudies of capillary compensated multi‐recess hydrostatic journal bearing operating with micropolar fluid/lubricant are not available in the existing literature to the best of authors' knowledge. Although, such bearing has been studied with Newtonian lubricant and available in open literature. Therefore, this paper is an original piece of work in the area of micropolar lubrication and compensated hydrostatic bearings.
PurposeThe present work aims to predict accurately the bearing design data for non‐recessed hybrid journal bearings, considering the effect of non‐Newtonian behavior of lubricant for different symmetric and non‐symmetric bearing geometric configurations.Design/methodology/approachThe simultaneous solution of generalized Reynold's equation governing the laminar flow of incompressible lubricant and the equation of flow of lubricant through the capillary restrictor, considering variable viscosity of lubricant following the “Power law”, has been carried out using FEM. For a given set of bearing geometric, operating parameters and for given external vertical load, the values of various performance characteristics have been obtained for a range of values of power law index, after establishing the journal center equilibrium position, the analysis for which has been elaborately explained.FindingsThe results obtained have been presented graphically for various bearing performance characteristics. It has been observed that with decrease in power law index “n”(0
A finite element model is constructed to analyze the effects of steady state temperature field on FGM layer thickness. The first-order shear deformation model is exploited to investigate the uncoupled thermal behavior of functionally graded plates in Abacus environment. The continuum is divided into 540 elements and 541 nodes using two node linear elements. The results show that the temperature distribution in the composite plate is more reasonable with increase in the thickness of FGM layer. The comparison with the non-graded two layered composite plate, the temperature field of the Zirconia/FGM/Aluminum three layered composite plate is in the form of a curve but in case of non-graded two layered composite plate the temperature field is in the form of inclined straight line with sharp bend at the interface of metal and ceramic phase.
Functionally graded materials (FGM) are newly developed materials described by variation in the characteristics gradually over volume. These materials find applications in very high temperature environments namely aerospace industry, nuclear reactors, gas turbines, and electronics cooling. These materials are used in high temperature environments with dynamic load conditions, so their transient thermoelastic analysis under these conditions is necessary. In this paper, transient thermoelastic investigation of FGM is carried out using finite element method (FEM). The effect of temperature dependence is considered in the thermophysical properties of a FGM plate in the direction of its thickness. FEM is applied to solve the thermo mechanical equations and Newmark direct integration scheme is used for obtaining the solution for transient loading. This method improves the accuracy for three dimensional cases and produces solutions directly in time domain. A comparative study is made with some existing methods, and it is found that temperature and thermal stresses remain within safe limits at higher temperatures while preserving the deformation in the structure. The results show that the grading parameter has a dominating effect on transient thermoelastic behavior on FGM plate.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.