The LHCb experiment is dedicated to precision measurements of CP violation and rare decays of B hadrons at the Large Hadron Collider (LHC) at CERN (Geneva). The initial configuration and expected performance of the detector and associated systems, as established by test beam measurements and simulation studies, is described.

Centre d'études et d'expertise sur les risques, l'environnement, la mobilité et l'aménagement

No abstract

No abstract

The Timepix3, hybrid pixel detector (HPD) readout chip, a successor to the Timepix [1] chip, can record time-of-arrival (ToA) and time-over-threshold (ToT) simultaneously in each pixel. ToA information is recorded in a 14-bit register at 40 MHz and can be refined by a further 4 bits with a nominal resolution of 1.5625 ns (640 MHz). ToT is recorded in a 10-bit overflow controlled counter at 40 MHz. Pixels can be programmed to record 14 bits of integral ToT and 10 bits of event counting, both at 40 MHz. The chip is designed in 130 nm CMOS and contains 256 × 256 pixel channels (55 × 55 µm 2 ). The chip, which has more than 170 M transistors, has been conceived as a general-purpose readout chip for HPDs used in a wide range of applications. Common requirements of these applications are operation without a trigger signal, and sparse readout where only pixels containing event information are read out.A new architecture has been designed for sparse readout and can achieve a throughput of up to 40 Mhits/s/cm 2 . The flexible architecture offers readout schemes ranging from serial (one link) readout (40 Mbps) to faster parallel (up to 8 links) readout of 5.12 Gbps. In the ToA/ToT operation