We designed, manufactured and characterized two birefringent microstructured fibers that feature a 5-fold increase in polarimetric sensitivity to hydrostatic pressure compared to the earlier reported values for microstructured fibers. We demonstrate a good agreement between the finite element simulations and the experimental values for the polarimetric sensitivity to pressure and to temperature. The sensitivity to hydrostatic pressure has a negative sign and exceeds -43 rad/MPa x m at 1.55 microm for both fibers. In combination with the very low sensitivity to temperature, this makes our fibers the candidates of choice for the development of microstructured fiber based hydrostatic pressure measurement systems.
We report what we believe to be the first highly symmetric first-order IR femtosecond laser fiber Bragg gratings within the telecommunications C band in free-standing optical fiber, fabricated with a relatively low NA lens and without use of oil immersion techniques. This grating features the smallest dimensions for a point-by-point fiber grating reported so far (to our knowledge). This achievement paves the way to rapid mass manufacturing of highly efficient and stable Bragg gratings using ultrafast lasers in any type of fiber. Mastering this femtosecond grating inscription technique also allowed the fabrication of the first Bragg gratings with direct near-IR femtosecond inscription in photonic crystal fibers, and without the use of techniques that rely on the compensation of the holey structure.
We have manufactured and characterized a birefringent holey fiber of a new construction. The birefringence in this fiber is induced by the highly elliptical shape of the core, which consists of a triple defect in a hexagonal structure. Using a hybrid edge-nodal finite-element method, we calculated the spectral dependence of phase and group modal birefringence for spatial modes E11 and E21 in idealized and in real fiber, whose geometry we determined by using a scanning-electron microscope. Results of our calculations show that technological imperfections significantly affect the fiber's birefringence. Normalized cutoff wavelengths for higher-order modes relative to the filling factor were also determined for the idealized structure. We observed a significant disagreement between theoretical and experimental values of cutoff wavelengths, which was attributed to high confinement losses near the cutoff condition. We also measured the spectral dependence of the phase and the group modal birefringence for spatial modes E11 and E21. The measured parameters showed good agreement with the results of modeling.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.