A biosurfactant was produced from Cunninghamella echinulata using sustainable technology for cleaning and degreasing of cotton fabric impregnated with burned motor oil. The surface tension was 32.4 mN/m on a medium containing instant noodle waste (2%), corn steep liquor (2%), and postfrying oil (0.5%) with a carbon/nitrogen ratio of 30 : 1, yield of 6.0 g·L−1, emulsifier index of 81.4%, and dispersant property of 32.15 cm2. The biosurfactant produced is a glycolipid constituted by carbohydrate (47.7%) and lipids (50.0%). The structure was confirmed by GC-MS (stearic acid in predominance with mass of 298 m/z), FTIR spectroscopy (polysaccharides in bands between 1025 and 1152 cm−1 and fatty acids in bands between 2057 and 3100 cm−1), 1H NMR, and 13C NMR spectrum (carbohydrates in signal of 4.38 ppm and 77.0 ppm). The properties of cleaning and degreasing of burned engine oil in cotton fabric by biosurfactant of C. echinulata was evidenced by removal of 86% of oil. After use of the biosurfactant, the fibers were not damaged, which is important for structural integrity of cotton fabric after the wash. In addition, the biosurfactant did not show toxic effect. This study suggests that the biosurfactant from C. echinulata can be used in formulation of textile detergents, in particular for removal of hydrophobic residues from the automobile industry.

In this work, we investigated the potential of Bacillus subtilis UCP 0146 in the bioconversion of a medium containing 100% cassava flour wastewater to obtain a bioemulsifier. The evaluation of the production was carried out by the emulsification index (IE24) and the surface tension (ST). The ionic charge, stability (temperature, salinity, and pH measured by IE24 and viscosity), and ability to remove and disperse oil and textile dye were investigated. B. subtilis produced an anionic bioemulsifier in the medium containing 100% cassava wastewater under Condition 4 of the factorial design (inoculum 9% at a temperature of 35 °C and shaken at 100 rpm), and showed a surface tension of 39 mN/m, an IE24 of 95.2%, and a yield of 2.69 g·L−1. The bioemulsifier showed stability at different pH (2–8), temperatures (0–120 °C), and NaCl concentrations, a dispersion oil displacement area (ODA) test of 55.83 cm2, and a reduction of the viscosity of the burned engine oil (90.5 Cp). The bioemulsifier was able to remove petroleum (94.4%) and methylene blue azo dye (62.2%). The bioemulsifier and its synthesis from bacteria also emphasizes the role of surfactants in oil remediation.

Dibenzothiophene (DBT) is a typical recalcitrant thiophenic sulfur component of fuels, and its desulphurization has been a model reaction in the treatment of these compounds. Based on this information, the potential of Pseudomonas fluorescens (UCP 1514) on the desulfurization of dibenzothiphene was studied, in order to use it for reducing the sulfur content of diesel oil in compliance with environmental regulations. The result of biodegradation by the bacteria was determined by undertaking high-performance liquid chromatography of the metabolites produced. These can also be identified by gas chromatography with a mass spectrometry detector, and doing so revealed a sulfur-free product, biphenyl, as the final product of the degradation process. The results showed a decrease of 73% in dibenzothiophene content, which means that P. fluorescens removes sulfur from dibenzothiophene with a good selectivity to form biphenyl. These promising results indicate that P. fluorescens has an interesting potential to degrade sulfur-containing compounds in diesel oil and thereby could help in removing sulfur content from diesel oil. The process of microbial desulfurization described herein can be used particularly after carrying out hydrodesulfurization. Consequently, the sulfur content could be reduced even further. Applying P. fluorescens UCP 1514 in dibenzothiophene could help to understand the nature of the biodegradation process and to achieve the regulatory standards for sulfur level in fossil fuels.

No abstract