In this article, the authors discuss the technical background and summarize the current body of literature regarding virtual monoenergetic (VM) images derived from dual-energy CT data, which can be reconstructed between 40 and 200 keV. Substantially improved iodine attenuation at lower kiloelectron volt levels and reduced beam-hardening artifacts at higher kiloelectron volt levels have been demonstrated from all major manufacturers of dual-energy CT units. Improved contrast attenuation with VM imaging at lower kiloelectron volt levels enables better delineation and diagnostic accuracy in the detection of various vascular or oncologic abnormalities. Low-kiloelectron-volt VM imaging may be useful for salvaging CT studies with suboptimal contrast material delivery or providing additional information on the arterial vasculature obtained from venous phase acquisitions. For patients with renal impairment, substantial reductions in the use of iodinated contrast material can be achieved by using lower-energy VM imaging. The authors recommend routine reconstruction of VM images at 50 keV when using dual-energy CT to exploit the increased contrast properties. For reduction of beam-hardening artifacts, VM imaging at 120 keV is useful for the initial assessment.

Purpose To compare two technical approaches for determination of coronary computed tomography (CT) angiography-derived fractional flow reserve (FFR)-FFR derived from coronary CT angiography based on computational fluid dynamics (hereafter, FFR) and FFR derived from coronary CT angiography based on machine learning algorithm (hereafter, FFR)-against coronary CT angiography and quantitative coronary angiography (QCA). Materials and Methods A total of 85 patients (mean age, 62 years ± 11 [standard deviation]; 62% men) who had undergone coronary CT angiography followed by invasive FFR were included in this single-center retrospective study. FFR values were derived on-site from coronary CT angiography data sets by using both FFR and FFR. The performance of both techniques for detecting lesion-specific ischemia was compared against visual stenosis grading at coronary CT angiography, QCA, and invasive FFR as the reference standard. Results On a per-lesion and per-patient level, FFR showed a sensitivity of 79% and 90% and a specificity of 94% and 95%, respectively, for detecting lesion-specific ischemia. Meanwhile, FFR resulted in a sensitivity of 79% and 89% and a specificity of 93% and 93%, respectively, on a per-lesion and per-patient basis (P = .86 and P = .92). On a per-lesion level, the area under the receiver operating characteristics curve (AUC) of 0.89 for FFR and 0.89 for FFR showed significantly higher discriminatory power for detecting lesion-specific ischemia compared with that of coronary CT angiography (AUC, 0.61) and QCA (AUC, 0.69) (all P < .0001). Also, on a per-patient level, FFR (AUC, 0.91) and FFR (AUC, 0.91) performed significantly better than did coronary CT angiography (AUC, 0.65) and QCA (AUC, 0.68) (all P < .0001). Processing time for FFR was significantly shorter compared with that of FFR (40.5 minutes ± 6.3 vs 43.4 minutes ± 7.1; P = .042). Conclusion The FFR algorithm performs equally in detecting lesion-specific ischemia when compared with the FFR approach. Both methods outperform accuracy of coronary CT angiography and QCA in the detection of flow-limiting stenosis.

Invasive coronary angiography (ICA) with measurement of fractional flow reserve (FFR) by means of a pressure wire technique is the established reference standard for the functional assessment of coronary artery disease (CAD) ( 1 , 2 ). Coronary computed tomographic (CT) angiography has emerged as a noninvasive method for direct assessment of CAD and plaque characterization with high diagnostic accuracy compared with ICA ( 3 , 4 ). However, the solely anatomic assessment provided with both coronary CT angiography and ICA has poor discriminatory power for ischemia-inducing lesions. FFR derived from standard coronary CT angiography (FFR) data sets by using any of several advanced computational analytic approaches enables combined anatomic and hemodynamic assessment of a coronary lesion by a single noninvasive test. Current technical approaches to the calculation of FFR include algorithms based on full- and reduced-order computational fluid dynamic modeling, as well as artificial intelligence deep machine learning ( 5 , 6 ). A growing body of evidence has validated the diagnostic accuracy of FFR techniques compared with invasive FFR. Improved therapeutic guidance has been demonstrated, showing the potential of FFR to streamline and rationalize the care of patients suspected of having CAD and improve outcomes while reducing overall health care costs ( 7 , 8 ). The purpose of this review is to describe the scientific principles, clinical validation, and implementation of various FFR approaches, their precursors, and related imaging tests. RSNA, 2017.

Purpose To assess the accuracy of computed tomographic (CT) angiography for diagnosis of cerebral aneurysms 5 mm or smaller, with digital subtraction angiography (DSA) as the reference standard, in a large patient cohort Materials and Methods This retrospective study was approved by the local institutional review board with a waiver of written informed consent. A total of 1366 patients who underwent cerebral CT angiography followed by DSA were included. The performance of CT angiography for depiction of aneurysms was evaluated by two readers on a per-patient and per-aneurysm basis and based on size of aneurysm, location, and status of rupture. The performance of CT angiography for diagnosis of aneurysms of different size, location, and rupture status was compared by using χ test. κ statistic was used to assess interreader agreement for diagnosis of aneurysms. Results Of 1366 patients, 579 patients had 711 small aneurysms at DSA. By using DSA as the reference standard, the respective sensitivity, specificity, and accuracy of CT angiography for readers 1 and 2 for detection of small aneurysms on a per-patient basis were 97.1% (562 of 579) and 97.4% (564 of 579), 98.5% (451 of 458) and 99.1% (454 of 458), and 97.7% (1013 of 1037) and 98.2% (1018 of 1037) and those on a per-aneurysm basis were 95.2% (677 of 711) and 95.4% (678 of 711), 96.6% (451 of 467) and 97.0% (454 of 468), and 95.8% (1128 of 1178) and 96.0% (1132 of 1179). The sensitivities of CT angiography were lower for detection of aneurysms smaller than 3 mm and unruptured compared with aneurysms that were 3-5 mm and ruptured (P < .001). No difference existed for the sensitivities of CT angiography for diagnosis of aneurysms in the anterior versus posterior circulation (P > .0167). Excellent or good interreader agreement was found for detection of intracranial aneurysms on a per-patient (κ = 0.982) and per-aneurysm (κ = 0.748) basis. Conclusion This large cohort study demonstrated that CT angiography had high accuracy for detection of small cerebral aneurysms, including those smaller than 3 mm. RSNA, 2017 Online supplemental material is available for this article.