In the European fusion roadmap, reliable power handling has been defined as one of the most criticalchallenges for realizing a commercially viable fusion power. In this context, the divertor is the key in-vessel component, as it is responsible for power exhaust and impurity removal for which divertor targetis subjected to very high heat flux loads. To this end, an integrated R&D project was launched in theEUROfusion Consortium in order to deliver a holistic conceptual design solution together with the coretechnologies for the entire divertor system of a DEMO reactor. The work package ‘Divertor’ consistsof two project areas: ‘Cassette design and integration’ and ‘Target development’. The essential missionof the project is to develop and verify advanced design concepts and the required technologies for adivertor system being capable of meeting the physical and system requirements defined for the next-generation European DEMO reactor. In this contribution, a brief overview is presented of the works fromthe first project year (2014). Focus is put on the loads specification, design boundary conditions, materialsrequirements, design approaches, and R&D strategy. Initial ideas and first estimates are presented
The European DEMO power reactor is currently under conceptual design within the EUROfusion Consortium. One of the most critical activities is the engineering of the plasma-facing components (PFCs) covering the plasma chamber wall, which must operate reliably in an extreme environment of neutron irradiation and surface heat and particle flux, while also allowing sufficient neutron transmission to the tritium breeding blankets. A systems approach using advanced numerical analysis is vital to realising viable solutions for these first wall and divertor PFCs. Here, we present the system requirements and describe bespoke thermo-mechanical and thermo-hydraulic assessment procedures which have been used as tools for design. The current first wall and divertor designs are overviewed along with supporting analyses. The PFC solutions employed will necessarily vary around the wall, depending on local conditions, and must be designed in an integrated manner by analysis and physical testing.
The design and development of a novel plasma facing component (for fusion power plants) is described. The component uses the existing "monoblock" construction which consists of a tungsten "block" joined via a copper interlayer to a through CuCrZr cooling pipe. In the new concept the interlayer stiffness and conductivity properties are tuned so that stress in the principal structural element of the component (the cooling pipe) is reduced. Following initial trials with off-the-shelf materials, the concept was realized by machined features in an otherwise solid copper interlayer. The shape and distribution of the features were tuned by Finite Element (FE) analyses subject to ITER Structural Design Criterion In-Vessel Components (SDC-IC) design rules. Proof of concept mock-ups were manufactured using a two stage brazing process verified by tomography and micrographic inspection. Full assemblies were inspected using ultrasound and thermographic (SATIR) test methods at ENEA and CEA respectively. High heat flux tests using IPP's GLADIS facility showed that 200 cycles at 20 MW/m 2 and five cycles at 25 MW/m 2 could be sustained without apparent component damage. Further testing and component development is planned.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.