This study utilized a simple hydrothermal method to synthesize nickel molybdenum oxide (NMO) for the detection of furazolidone (FZE). Our synthesized NMO was characterized by X-Ray diffraction (XRD), X-Ray photoelectron spectroscopy (XPS), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), field emission scanning electron spectroscopy (FE-SEM), and energy dispersive X-Ray spectroscopy (EDX). The cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to detect the FZE. Under optimized conditions, the obtained results showed that the NMO had an excellent electrocatalytic property towards FZE. As a result, NMO/GCE showed a good linear range of 0.001–1765 µM, an excellent detection limit (LOD) of 0.02 µM, and sensitivity of 0.2042 µA µM−1 cm−2.
The major problem facing humanity in the world right now is the sustainable provision of water and electricity. Therefore, it is essential to advance methods for the long-term elimination or removal of organic contaminants in the biosphere. Ciprofloxacin (CIP) is one of the most harmful pollutants affecting human health through improper industrial usage. In this study, a zinc tungsten oxide (ZnWO4) nanomaterial was prepared with a simple hydrothermal synthesis. The ZnWO4/Carbon black nanocomposites were fabricated for the determination of CIP. The nanocomposites were characterized by field emission scanning electron microscopy, energy dispersion X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy. Electrochemical studies were done using cyclic voltammetry and differential pulse voltammetry methods. Based on the electrode preparation, the electrochemical detection of CIP was carried out, producing exceptional electrocatalytic performance with a limit of detection of 0.02 μM and an excellent sensitivity of (1.71 μA μM−1 cm−2). In addition, the modified electrode displayed great selectivity and acceptable recoveries in an environmental water sample analysis for CIP detection of 97.6% to 99.2%. The technique demonstrated high sensitivity, selectivity, outstanding consistency, and promise for use in ciprofloxacin detection. Ciprofloxacin was discovered using this brand-new voltammetry technique in a water sample analysis.
Pharmaceutical and personal care products are emerging as a new category of environmental pollution. Analytical drug detection from a biological sample for detection is still crucial today. Mefenamic acid (MA) is an anti-inflammatory drug utilized for its antipyretic and analgesic properties, which is harmful to patients at higher dosages and is also recognized as a chemical pollutant that harms the environment. In this view, Dysprosium manganite/carbon nanofiber (DMO/CNF) was prepared by hydrothermal method for the electrochemical detection of MA. DMO/CNF/GCE exhibits high selectivity, excellent anti-interference, good stability, and reproducibility toward the detection of MA. The enhanced electrochemical performance of DMO/CNF/GCE was attributed to their synergetic interaction. Under optimized conditions, DMO/CNF/GCE shows a wide linear range of 0.01–741 μM and a low LOD of 0.009 μM. Satisfactory recoveries were obtained for human blood and tablet samples. Thus, the proposed DMO/CNF nanocomposite emerges as a promising material for the detection of MA.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.