A B S T R A C TOver the years, the emergence of pesticides practice has prevailed to be the most intricate environmental turmoil amongst the scientific community. Specifically, pesticides constitute an accumulative, persistent and detrimental impact towards the survival of flora, fauna and environmental matrix. This has inspired a developing research with a variety of treatment technologies. Adsorption is recognized as the most efficient and promising approach, due to the ease of operation, simplicity of design, insensitivity to the toxic substances and superior capability for removing a broad range of pollutants. Its diverse applications, however, are retarded by the high cost of adsorbents and difficulties associated with regeneration. Montmorillonite and its derivatives, a unique group of under-utilized clay-based minerals has been proposed to be a suitable candidate for the treatment of contaminated wastewater. It plays a key role as the natural scavenger of pesticides, due to the abundantly availability, large specific surface area and high adsorptive and ion exchange properties. This paper describes the origin, physical, chemical and physicochemical properties of natural montmorillonite. The preparation procedure, reusability, commercial product and economical evaluation are highlighted. The specific classification, environmental and health implication of organo-pesticide are discussed. The revolution of montmorillonite-assisted adsorption process for the remediation of organo-pesticide was summarized. Additionally, the characterizations, surface chemistry and mechanism investigation are outlined.

No abstract

The sodium salt-assisted low temperature activation of bentonite (BB) was attempted. The unique features of the raw bentonite and BB were characterized with respect to the morphological, functional, and textural analysis. The adsorptive behaviour was evaluated by adopting methylene blue (MB) as the model pollutant via batch adsorption experiment. The experimental data were fitted to the non-linear isotherm equations (Freundlich, Langmuir, and Temkin), while the adsorption modelling was interpreted by the pseudo-first order, pseudo-second order and Elovich models. The adsorptive mechanism was ascertained according to intraparticle-diffusion and boyd models. The intercalation of sodium salt into the bentonite surface give rise to the specific surface area and total pore volume from 120.34 to 426.91, m2/g and 0.155 to 0.225 cm3/g, respectively, indicating a large proportion of the newly formed surfaces may be connected to new pore walls, associated with the silanol (≡SiOH), and aluminol (≡AlOH), and hydroxyl (–OH) groups for the possible entrapment MB onto the adsorbent. The equilibrium data was satisfactory described by the Langmuir isotherm and pseudo-second order model, with a monolayer adsorption capacity for MB of 318.38 mg/g, while the thermodynamic study verified spontaneous, feasible, and endothermic of the adsorption process.

Herein, the facile one step acid activation of bentonite derived functionalized adsorbent (AB) for the effective remediation of both ionic and non-ionic secondary pesticides, ametryn and metolachlor has been attempted. The surface characteristics of AB were examined by the nitrogen adsorption–desorption analysis, scanning electron microscopy (SEM), and Fourier Transforms Infrared (FTIR) Spectroscopy. The adsorptive behavior was evaluated with respect to the effect of contact time, initial concentrations and solution pH. The equilibrium data were fitted to the Langmuir, Freundlich and Temkin isotherm models, while the adsorption kinetic was analyzed using the pseudo-first order and pseudo-second order kinetic equations. Thermodynamic parameters including the standard enthalpy change (ΔH°), standard entropy change (ΔS°), and Gibbs free energy change (ΔG°) were established. Thermodynamic analysis illustrated that the adsorption process was feasible and exothermic in nature, while the characterization findings verified the alteration of FTIR bands, and a high specific surface area of 464.92 m2/g, with a series of pores distributed over the surface. Equilibrium data was best confronted to the pseudo-second order kinetic model, while the adsorptive removal of ametryn and metolachlor onto AB was satisfactory described by the Langmuir isotherm model, with the monolayer adsorption capacities for ametryn and metolachlor of 2.032 and 0.208 mmole/g respectively. The findings outlined the potential of the newly develop AB for the on-site treatment of pesticide polluted water.