Despite substantial advantages in material development and in periodic non-destructive inspection together with periodic grinding and other measures in order to guarantee safe service, fatigue crack propagation and fracture is still in great demand as emphasised by the present special issue. Rails, as the heart of the railway system, are subjected to very high service loads and harsh environmental conditions. Since any potential rail breakage includes the risk of catastrophic derailment of vehicles, it is of paramount interest to avoid such a scenario. The aim of the present paper is to introduce the most important questions regarding crack propagation and fracture of rails. These include the loading conditions: contact forces from the wheel and thermal stresses due to restrained elongation of continuously welded rails together with residual stresses from manufacturing and welding in the field, which is discussed in Section 2. Section 3 provides an overview of crack-type rail defects and potential failure scenarios. Finally the stages of crack propagation from initiation up to final breakage are discussed.
A better understanding of the thermomechanical loading of brake discs is important for controlling material fatigue and crack propagation in the disc. In the present study, full-scale drag braking experiments were performed on brake discs made from eight different grey cast iron alloys. The well-performing materials were also tested with an alternative brake pad material. A testing procedure with repeated drag brakings was used. The disc and pad temperatures were registered by thermocouples embedded at selected locations, and the disc surface temperatures by a thermocamera. Extensive analyses of the measured temperatures were performed. The results for the thermocouples at the mid-radius of the disc and at the end of brake applications indicatd that the two sides of the disc have opposite deviations from the mean temperature. The temperature deviations are generally temporally alternating, but also stationary variations can be found. The thermocamera gives the possibility of identifying the phenomena behind the temperature variations found from the thermocouples. Banding of the disc-pads contact with alternating one band and two bands of high temperatures is observed for the studied brake discs exposed to severe braking load cases. Moreover, it was found that hot-spot patterns develop on the disc surface, which are spatially fixed during each brake application. However, they may be either slowly migrating or fixed relative to the disc during consecutive brake applications. Thermal images show that small cracks do not affect hot-spot migration as a hot spot migrates over the crack. However, at a critical length of the crack, the heat becomes localized at the crack and increases its growth, thus limiting the life of the disc. The tests indicate that a combination of hot-spot migration, alternating bands and small temperature differences over the disc are significant factors to be considered when improving the lifespan of the discs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.