Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being suitable for thermoelectric applications. We measure the thermoelectric properties of various poly(3,4-ethylenedioxythiophene) samples, and observe a marked increase in the Seebeck coefficient when the electrical conductivity is enhanced through molecular organization. This initiates the transition from a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics.
In organics-based (opto)electronic devices, the interface dipoles formed at the organic/metal interfaces play a key role in determining the barrier for charge (hole or electron) injection between the metal electrodes and the active organic layers. The origin of this dipole is rationalized here from the results of a joint experimental and theoretical study based on the interaction between acrylonitrile, a pi-conjugated molecule, and transition metal surfaces (Cu, Ni, and Fe). The adsorption of acrylonitrile on these surfaces is investigated experimentally by photoelectron spectroscopies, while quantum mechanical methods based on density functional theory are used to study the systems theoretically. It appears that the interface dipole formed at an organic/metal interface can be divided into two contributions: (i) the first corresponds to the "chemical" dipole induced by a partial charge transfer between the organic layers and the metal upon chemisorption of the organic molecules on the metal surface, and (ii) the second relates to the change in metal surface dipole because of the modification of the metal electron density tail that is induced by the presence of the adsorbed organic molecules. Our analysis shows that the charge injection barrier in devices can be tuned by modulating various parameters: the chemical potential of the bare metal (given by its work function), the metal surface dipole, and the ionization potential and electron affinity of the organic layer.
Recognition and selection are of fundamental importance for the hierarchical assembly of supramolecular systems. Coronene induces the formation of a hydrogen-bonded isophthalic acid supramolecular macrocycle, and this well-defined heterocluster forces, in its turn, DBA1 to form a van der Waals stabilized honeycomb lattice, leading to a three-component 2D crystal containing nine molecules in the unit cell. The recognition and selection events enable efficient error correction and healing in redundant mixtures.
The structural organization of three different families of semicrystalline π-conjugated polymers is reported (poly(3-hexylthiophene) (P3HT), poly[2,6-(4,4-bis-alkyl-4H-cyclopenta-[2,1-b;3,4-b0]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)](cyclopentadithiophene-benzothiadiazole) (CDT-BTZ) and poly(N,N"-bis-2-octyldodecylnaphtalene-1,4,5,8-bis-dicarboximide-2,6-diyl-alt-5,5-2,2-bithiophene (P(NDI2OD-T2))). These have triggered significant interest for their remarkable charge-transport properties. By performing molecular mechanics/dynamics simulations with carefully re-parameterized force fields, it is illustrated in particular how the supramolecular organization of these conjugated polymers is driven by an interplay between the length and nature of the conjugated monomer unit and the packing of their alkyl side chains, and to what extent it impacts the charge-carrier mobility, as monitored by quantum-chemical calculations of the intermolecular hopping transfer integrals. This Progress Report is concluded by providing generic guidelines for the design of materials with enhanced degrees of supramolecular organization.
This paper deals with the influence of the nature and number of solid interfaces on the alignment of the columns in a semiconducting discotic liquid crystal. The solid substrates have been characterized in terms of their roughness and surface energy. The alignment of the discotic liquid crystal columns on these substrates has been determined by optical microscopy under crossed polarizers and by tapping-mode atomic force microscopy. The nature of the substrates has negligible influence on the alignment. The key parameter is the confinement imposed to the film. These surprising observations are explained by the antagonist alignment role of gas and solid interfaces.
Polymer field-effect transistors with a field-effect mobility of μ≈0.3cm2s−1V−1 have been demonstrated using regioregular poly(3-hexylthiophene) (rr-P3HT). Devices were fabricated by dip coating the semiconducting polymer followed by annealing at 150°C for 10min. The heat annealed devices exhibit an increased field-effect mobility compared with the as-prepared devices. Morphology studies and analysis of the channel resistance demonstrate that the annealing process increases the crystallinity of rr-P3HT and improves the contact between the electrodes and the P3HT films, thereby increasing the field-effect mobility of the films.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.