No abstract

The development and demonstration of a highly efficient warm‐white all‐nitride phosphor‐converted light emitting diode (pc‐LED) is presented utilizing a GaN based quantum well blue LED and two novel nitrogen containing luminescent materials, both of which are doped with Eu2+. For color conversion of the primary blue the nitridosilicates M2Si5N8 (orange‐red) and MSi2O2N2 (yellow‐green), with M = alkaline earth, were employed, thus achieving a high luminous efficiency (25 lumen/W at 1 W input), excellent color quality (correlated color temperature CCT = 3200 K, general color rendering index Ra > 90) and the highest proven color stability of any pc‐LED obtained so far. Thus, these novel all‐nitride LEDs are superior to both incandescent and fluorescent lamps and may therefore become the next generation of general lighting sources. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

Solid-state lighting is a rapidly evolving, emerging technology whose efficiency of conversion of electricity to visible white light is likely to approach 50% within the next several years. This efficiency is significantly higher than that of traditional lighting technologies, giving solid-state lighting the potential to enable significant reduction in the rate of world energy consumption. Further, there is no fundamental physical reason why efficiencies well beyond 50% could not be achieved, which could enable even more significant reduction in world energy usage. In this article, we discuss in some detail: (a) the several approaches to inorganic solid-state lighting that could conceivably achieve "ultra-high," 70% or greater, efficiency, and (b) the significant research questions and challenges that would need to be addressed if one or more of these approaches were to be realized.

No abstract

High power light emitting diodes (LEDs) continue to increase in output flux with the best III‐nitride based devices today emitting over 150 lm of white, cyan, or green light. The key design features of such products will be covered with special emphasis on power packaging, flip‐chip device design, and phosphor coating technology. The high‐flux performance of these devices is enabling many new applications for LEDs. Two of the most interesting of these applications are LCD display backlighting and vehicle forward lighting. The advantages of LEDs over competing lighting technologies will be covered in detail.