The number of disabled individuals due to stroke is increasing day by day and is projected to continue increasing at an alarming rate in United States. But the current amount of health professionals in physical therapy is inadequate to provide rehabilitation to these large groups. From early 1990s, researchers have been trying to develop an easy and feasible solution to this problem and lot of assistive devices both end effector type or exoskeleton type have been developed till to date. However, only a few of them have been commercialized and are being used in rehabilitation of post-stroke patients. Making the use of exoskeletons and other devices to regain lost motor function is rare. Providing therapy to this large group is quite impossible without commercializing of exoskeleton. This has motivated the authors to make a literature review and figure the reasons out that need to be solved to bridge the gap between research prototype to commercial version. This paper covers the necessity of incorporating robotic devices in rehabilitation, a brief description of existing devices particularly upper limb exoskeletons, their hardware limitations, and control issues. Our review shows that there are significant flaws in hardware design and developing control algorithm of exoskeletons to be available in rehabilitation program.
The design of an upper limb rehabilitation robot for post-stroke patients is considered a benchmark problem regarding improving functionality and ensuring better human–robot interaction (HRI). Existing upper limb robots perform either joint-based exercises (exoskeleton-type functionality) or end-point exercises (end-effector-type functionality). Patients may need both kinds of exercises, depending on the type, level, and degree of impairments. This work focused on designing and developing a seven-degrees-of-freedom (DoFs) upper-limb rehabilitation exoskeleton called ‘u-Rob’ that functions as both exoskeleton and end-effector types device. Furthermore, HRI can be improved by monitoring the interaction forces between the robot and the wearer. Existing upper limb robots lack the ability to monitor interaction forces during passive rehabilitation exercises; measuring upper arm forces is also absent in the existing devices. This research work aimed to develop an innovative sensorized upper arm cuff to measure the wearer’s interaction forces in the upper arm. A PID control technique was implemented for both joint-based and end-point exercises. The experimental results validated both types of functionality of the developed robot.
SUMMARY The robotic intervention has great potential in the rehabilitation of post-stroke patients to regain their lost mobility. In this paper, firstly, we present a design of a novel, 7 degree-of-freedom (DOF) upper limb robotic exoskeleton (u-Rob) that features shoulder scapulohumeral rhythm with a wide range of motions (ROM) compared to other existing exoskeletons. An ergonomic shoulder mechanism with two passive DOF was included in the proposed exoskeleton to provide scapulohumeral motion with corresponding full ROM. Also, the joints of u-Rob have more range of motions compared to its existing counterparts. Secondly, we propose a fractional sliding mode control (FSMC) to control u-Rob. Applying the Lyapunov theory to the proposed control algorithm, we showed the stability of it. To control u-Rob, FSMC has shown effectiveness to handle unmodeled dynamics (e.g. friction, disturbance, etc.) in terms of better tracking and chatter compared to traditional SMC.
Introduction The aim of this research is to develop a robot-assistive training approach for the disabled individuals with impaired upper limb functions. People with impaired upper limb function can regain their motor functionality undergoing intense rehabilitation exercises. With increasing number of disabled individuals, we face deficiency in the number of expert therapists. One promising remedy could be the use of robotic assistive devices. Method To instruct and demonstrate rehabilitation exercise, this research used NAO robot. A library of recommended rehabilitation exercises involving shoulder (i.e., abduction/adduction, vertical flexion/extension, and internal/external rotation), and elbow (i.e., flexion/extension) joint movements was formed in Choregraphe (graphical programming interface). For this purpose, a kinematic model of human upper-extremity was developed based on modified Denavit-Hartenberg notations. Result In experiments, NAO robot gave voice instruction and was maneuvered to cooperate and demonstrate the exercises from the library. NAO also plays some complex game with the subject that represents a multi-joint movement's exercise, which was also included in the library. Conclusions Experimental results with healthy participants reveal that the NAO robot can successfully instruct and demonstrate upper-extremity rehabilitation exercises for single and multi-joint movements. It implies a technical development of cooperative rehabilitation system for which target group will be individuals with upper limb impairment.
Upper limb dysfunctions (ULD) are common following a stroke. Annually, more than 15 million people suffer a stroke worldwide. We have developed a 7 degrees of freedom (DoF) exoskeleton robot named the smart robotic exoskeleton (SREx) to provide upper limb rehabilitation therapy. The robot is designed for adults and has an extended range of motion compared to our previously designed ETS-MARSE robot. While providing rehabilitation therapy, the exoskeleton robot is always subject to random disturbance. Moreover, these types of robots manage various patients and different degrees of impairment, which are quite impossible to model and incorporate into the robot dynamics. We hypothesize that a model-independent controller, such as a PID controller, is most suitable for maneuvering a therapeutic exoskeleton robot to provide rehabilitation therapy. This research implemented a model-free proportional–integral–derivative (PID) controller to maneuver a complex 7 DoF anthropomorphic exoskeleton robot (i.e., SREx) to provide a wide variety of upper limb exercises to the different subjects. The robustness and trajectory tracking performance of the PID controller was evaluated with experiments. The results show that a PID controller can effectively control a highly nonlinear and complex exoskeleton-type robot.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.