The focus of this study is to design and integrate silver/silver chloride (Ag/AgCl) electronic textile (e-textile) electrodes into different textile substrates to evaluate their ability to monitor electrodermal activity (EDA). Ag/AgCl e-textiles were stitched into woven textiles of cotton, nylon, and polyester to function as EDA monitoring electrodes. EDA stimulus responses detected by dry e-textile electrodes at various locations on the hand were compared to the EDA signals collected by dry solid Ag/AgCl electrodes. 4-h EDA data with e-textile and clinically conventional rigid electrodes were compared in relation to skin surface temperature. The woven cotton textile substrate with e-textile electrodes (0.12 cm2 surface area, 0.40 cm distance) was the optimal material to detect the EDA stimulus responses with the highest average Pearson correlation coefficient of 0.913 ± 0.041 when placed on the distal phalanx of the middle finger. In addition, differences with EDA waveforms recorded on various fingers were observed. Trends of long-term measurements showed that skin surface temperature affected EDA signals recorded by non-breathable electrodes more than when e-textile electrodes were used. The effective design criteria outlined for e-textile electrodes can promote the development of comfortable and unobtrusive EDA monitoring systems, which can help improve our knowledge of the human neurological system.

This work presents a novel systematic approach to understand the effects of electrode designs on monitoring EDA which is of importance for the design of wearable EDA monitoring devices.

The main goal of this work is to develop a fabrication process and system for silver/silver chloride (Ag/AgCl)-coated yarn, as Ag/AgCl is the preferred non-polarizing material for interfacing with the body in a clinical setting when monitoring biological signals. A roll-to-roll electrochemical system was designed and built to deposit AgCl on Ag-coated nylon 6,6 yarn in a controllable process. In particular, the movement of the yarn, voltage limit and mixing of 0.9% sodium chloride solution were held constant while the applied current was varied. The Ag-coated nylon acted as the working electrode with two counter electrodes made of platinum. The optimal Ag/AgCl yarns were then further characterized. The roll-to-roll parameters identified include the applied current of approximately 1.82 mA/cm2 for the Ag-coated nylon yarn with a voltage limit of 2.00 V while in the electrochemical chamber. In addition, the yarn had a uniform movement of 0.08 cm/s, which meant that 7 cm of yarn was in the chamber for approximately 89.17 s. The fabrication process was relatively repeatable, yielding the average resistance of 11.0 ± 1.8 Ω/cm for the optimal Ag/AgCl-coated yarn with a low standard deviation between different fabrication processes. A proof-of-concept system was developed and parameters important for the fabrication of functional Ag/AgCl electronic textiles (e-textiles) were detailed. An effective roll-to-roll fabrication method for Ag/AgCl-coated yarns has the potential to significantly contribute to the design and development of wearable e-textile biological monitoring systems that require Ag/AgCl sensor materials.

Biofilms are communities of bacteria that can cause infections which are resistant to the immune system and antimicrobial treatments, posing a significant threat for patients with implantable and indwelling medical devices. The purpose of our research was to determine if utilizing specific parameters for electric currents in conjunction with antibiotics could effectively treat a highly resistant biofilm. Our study evaluated the impact of 16 μg/mL of vancomycin with or without 22 or 333 μA of direct electric current (DC) generated by stainless steel electrodes against 24-, 48-, and 72-h-old Staphylococcus epidermidis biofilms formed on titanium coupons. An increase in effectiveness of vancomycin was observed with the combination of 333 μA of electric current against 48-h-old biofilms (P value = 0.01) as well as in combination with 22 μA of electric current against 72-h-old biofilms (P value = 0.04); 333 μA of electric current showed the most significant impact on the effectiveness of vancomycin against S. epidermidis biofilms demonstrating a bioelectric effect previously not observed against this strain of bacteria.

No abstract