Zinc oxide (ZnO) nanostructures were synthesized in the form of nanoparticles, nanoflowers and nanourchins. Structural. electronic and optical characterization of the samples were done via standard techniques such as X-ray...

In this report, the growth of zinc oxide (ZnO) nanocrystals with various morphologies, nanoflower, nanosheet, and nanorod, on flexible stainless steel (SS) foils to be utilized as photoanodes in photoelectrochemical (PEC) solar cells has been presented. It has been aimed to provide flexibility and adaptability for the next generation systems with the incorporation of SS foils as electrode into PEC cells. Therefore, physical deformation tests have been applied to the prepared ZnO thin film photoanodes. These thin films have been thoroughly characterized before and after straining for better understanding the relationship between the morphology, straining effect and photoelectrochemical efficiency. We observed a notable increase in the maximum incident photon-to-current efficiency (IPCE) and durability of all ZnO photoelectrodes after straining process. The increase in IPCE values by 1.5 and 2.5 folds at 370 nm has been observed for nanoflower and nanorod morphologies, respectively after being strained. The maximum IPCE of 69% has been calculated for the ZnO nanorod structures after straining. Bending of the SS electrodes resulted in the more oriented nanorod arrays compared to its flat counterpart, which improved both the light absorption and also the photo-conversion efficiency drastically. The finite-difference time-domain simulations have also been carried out to examine the optical properties of flat and bent ZnO electrodes. Finally, it has been concluded that SS photoanodes bearing ZnO semiconducting material with nanoflower and nanorod morphologies are very promising candidates for the solar hydrogen generator systems in terms of efficiency, durability, flexibility, and lightness in weight.

Introducing a zinc stannate, ZnSnO3 (ZTO), layer on hydrothermally grown 3D-zinc oxide (ZnO) nanosheet thin films has been proven to have a quenching effect on the photoluminescence emissions, indicating very slow recombination of photoinduced electron–hole pairs in photoelectrochemical water splitting (PEC) reactions. Motivated by this, the ZnO/ZTO bilayer system has been used as the electron transport layer for copper indium gallium sulfide (CIGS)-based photoelectrodes in PEC applications. Furthermore, the poor photoresistivity of CIGS has been improved via indium sulfide (In2S3) deposition. Consequently, the photoelectrode obtained from the inverted configuration, ZnO/ZTO/CIGS/In2S3, has generated a photocurrent density of 6.4 mA cm–2 at 0.4 V (vs Ag/AgCl), exceeding the performance of ZnO NS/CIGS/In2S3 photoelectrodes by three folds. The highest ABPE and IPCE efficiencies have been calculated as 4.2% and 57%, respectively. More importantly, two cost-effective nonvacuum techniques for large-scale thin film fabrications such as chemical bath deposition (CBD) and ultrasonic spray pyrolysis (USP) methods have been adopted to acquire photoelectrodes with inverted configurations providing an advantageous approach for low-cost photoelectrode design for sustainable energy production.

In this study, zinc oxide (ZnO) powders in two different morphologies, nanowire (NW) and nanoflower (NF), have been synthesized by the hydrothermal method. The eligibility of the pristine ZnO nanopowders as a photo-active material has been revealed by designing P-SC devices via the facile drop-casting method on both glass and plastic substrates in large-area applications. The impact of physical properties and especially defect structures on photo-supercapacitor (P-SC) performance have been explored. Although the dark Coulombic efficiency (CE%) of both NW and NF-based P-SC were very close to each other, the CE% of NW P-SC increased 3 times, while the CE% of NF P-SC increased 1.7 times under the UV-light. This is because the charge carriers produced under light excitation, extend the discharge time, and as confirmed by electron paramagnetic resonance, photoluminescence, and transmission electron microscopy analyses, the performance of P-SCs made from NF powders was relatively low compared to those produced from NW due to the high core defects in NF powders. The energy density of 78.1 mWh kg−1 obtained for NF-based P-SCs is very promising, and the capacitance retention value of almost 100% for 3000 cycles showed that the P-SCs produced from these materials were entirely stable. Compared to the literature, the P-SCs we propose in this study are essential for new generation energy storage systems, thanks to their ease of design, adaptability to mass production for large-area applications, and their ability to store more energy under illumination.

No abstract

No abstract

No abstract

In this study, three different morphologies, nanoflower (NF), nano sponge (NS), and nano urchin (NU), of zinc oxide (ZnO) nanostructures were synthesized successfully via a mild hydrothermal method. After synthesis, the samples were annealed in the atmosphere at 300, 600, and 800 °C. Although annealing provides different degradation kinetics for different morphologies, ZnO NS performed significantly better than other morphologies for all annealing temperatures we used in the study. When the photoluminescence, electron paramagnetic resonance spectroscopy, BET surface, and X-ray diffraction analysis results are examined, it is revealed that the defect structure, pore diameter, and crystallinity cumulatively affect the photocatalytic activity of ZnO nanocatalysts. As a result, to obtain high photocatalytic activity in rhodamine B (RhB) degradation, it is necessary to develop a ZnO catalyst with fewer core defects, more oxygen vacancies, near band emission, large crystallite size, and large pore diameter. The ZnO NS-800 °C nanocatalyst studied here had a 35.6 × 10–3 min–1 rate constant and excellent stability after a 5-cycle photocatalytic degradation of RhB.