Landslides are the second most important cause of tsunamis after earthquakes, and their potential for generating large tsunamis depend on the slide process. Among the world's largest submarine landslides is the Storegga Slide that generated a large tsunami over an ocean‐wide scale, while no traces of a tsunami generated from the similar and nearby Trænadjupet Slide have been found. Previous models for such landslide tsunamis have not been able to capture the complexity of the landslide processes and are at odds with geotechnical and geomorphological data that reveal retrogressive landslide development. The tsunami generation from these massive events are here modeled with new methods that incorporate complex retrogressive slide motion. We show that the tsunamigenic strength is closely related to the retrogressive development and explain, for the first time, why similar giant landslides can produce very different tsunamis, sometimes smaller than anticipated. Because these slide mechanisms are common for submarine landslides, modeling procedures for dealing with their associated tsunamis should be revised.

Submarine slides are a significant hazard to the safe operation of pipelines in the proximity of continental slopes. This paper describes the results of a centrifuge testing programme aimed at studying the impact forces exerted by a submarine slide on an offshore pipeline. This was achieved by dragging a model pipe at varying velocities through fine-grained soil at various degrees of consolidation, hence exhibiting properties spanning from the fluid to the geotechnical domains, relevant to the state of submarine slide material. To simulate the high strain rates experienced by the soil while flowing around a pipe in the path of a submarine slide, tests were conducted at pipe-soil velocities of up to 4 . 2 m/s. The changing density and shear strength of the samples were back-calculated from T-bar penetrometer test results. A hybrid approach combining geotechnical and fluid-mechanics-based components of horizontal drag resistance was developed. This approach provides an improved method to link the density and strength of the slide material to the force applied on the pipe. Besides fitting the present observations, the method provides an improved reinterpretation of similar data from the literature.

The paper presents an overview of recent developments in geotechnical analysis and design associated with oil and gas developments in deep water. Typically the seabed in deep water comprises soft, lightly overconsolidated, fine grained sediments, which must support a variety of infrastructure placed on the seabed or anchored to it. A particular challenge is often the mobility of the infrastructure either during installation or during operation, and the consequent disturbance and healing of the seabed soil, leading to changes in seabed topography and strength. Novel aspects of geotechnical engineering for offshore facilities in these conditions are reviewed, including: new equipment and techniques to characterise the seabed; yield function approaches to evaluate the capacity of shallow skirted foundations; novel anchoring systems for moored floating facilities; pipeline and steel catenary riser interaction with the seabed; and submarine slides and their impact on infrastructure. Example results from sophisticated physical and numerical modelling are presented.

The cylindrical T-bar penetrometer was developed for profiling the undrained strength of soft soils in the centrifuge and is now a widely-used offshore site investigation tool. The conventional interpretation of the T-bar test is to convert the measured penetration resistance to soil strength using a single bearing factor associated with steady flow of soil around the bar. This paper describes a new analysis for the interpretation of T-bar penetrometer tests at shallow embedment and in soft soils, which is an increasingly significant consideration in the design of seabed infrastructure, including pipelines. The analysis captures two mechanisms that are usually neglected: (i) soil buoyancy and (ii) the reduced bearing factor arising from the shallow failure mechanism mobilized prior to the full flow of soil around the bar. The framework derives from theoretical considerations and is calibrated using large deformation finite element analyses. The depth at which the steady deep penetration condition is reached is shown to depend on the normalized soil strength, su/γ′D, and may be up to several diameters deep. The effect of this new procedure on the inferred soil strength compared with the conventional approach is illustrated through T-bar tests in three different centrifuge samples, spanning a range of strength ratios.

Abstract:Recent