Blue-emitting perovskites can be easily attained by precisely tuning the halide ratio of mixed halide (Br/Cl) perovskites (MHPs). However, the adjustable halide ratio hinders the passivation of Cl vacancies, the main source of trap states leading to inferior performance of blue MHP lightemitting diodes (LEDs). Here, we report a strategy for passivating Cl vacancies in MHP quantum dots (QDs) using nonpolar solvent-soluble organic pseudohalide [n-dodecylammonium thiocyanate (DAT)], enabling blue MHP LEDs with greatly enhanced efficiency. Density functional theory calculations reveal that the thiocyanate (SCN − ) groups fill in the Cl vacancies and remove electron traps within the bandgap. DAT-treated CsPb(Br x Cl 1−x ) 3 QDs exhibit near unity (∼100%) photoluminescence quantum yields, and their blue (∼470 nm) LEDs are spectrally stable with an external quantum efficiency of 6.3%, a record for perovskite LEDs emitting in the range of 460−480 nm relevant to Rec. 2020 display standards, and a halflifetime of ∼99 s.

Nonfullerene solar cells have increased their efficiencies up to 13%, yet quantum efficiencies are still limited to 80%. Here we report efficient nonfullerene solar cells with quantum efficiencies approaching unity. This is achieved with overlapping absorption bands of donor and acceptor that increases the photon absorption strength in the range from about 570 to 700 nm, thus, almost all incident photons are absorbed in the active layer. The charges generated are found to dissociate with negligible geminate recombination losses resulting in a short-circuit current density of 20 mA cm−2 along with open-circuit voltages >1 V, which is remarkable for a 1.6 eV bandgap system. Most importantly, the unique nano-morphology of the donor:acceptor blend results in a substantially improved stability under illumination. Understanding the efficient charge separation in nonfullerene acceptors can pave the way to robust and recombination-free organic solar cells.

Nonfullerene" acceptors are proving effective in bulk heterojunction (BHJ) solar cells when paired with selected polymer donors. However, the principles that guide the selection of adequate polymer donors for high-efficiency BHJ solar cells with nonfullerene acceptors remain a matter of some debate and, while polymer main-chain substitutions may have a direct influence

Understanding defect chemistry, particularly ion migration, and its significant effect on the surface's optical and electronic properties is one of the major challenges impeding the development of hybrid perovskite-based devices. Here, using both experimental and theoretical approaches, we demonstrated that the surface layers of the perovskite crystals may acquire a high concentration of positively charged vacancies with the complementary negatively charged halide ions pushed to the surface. This charge separation near the surface generates an electric field that can induce an increase of optical band gap in the surface layers relative to the bulk. We found that the charge separation, electric field, and the amplitude of shift in the bandgap strongly depend on the halides and organic moieties of perovskite crystals. Our findings reveal the peculiarity of surface effects that are currently limiting the applications of perovskite crystals and more importantly explain their origins, thus enabling viable surface passivation strategies to remediate them.

Slot-die (SD) coating is used to fabricate fully solution processed organic solar cells (OSCs) based on a blend of high performance donor polymer (PTB7-Th) and a non-fullerene acceptor (IEICO-4F) for stable devices over extended periods of operation. The optimization of a sequential deposition process of transport and active layers, under ambient conditions, enable high efficiency slot-die coated solar cells with remarkable power conversion efficiencies (PCE) > 11.0% to bridge the gap between lab-to-fab. Fully slot-die coated inverted OSCs are demonstrated with efficiencies reaching 11% along with 1 cm 2 devices, proving the scalability and reproducibility of the proposed technique. Further, replacing the evaporated Ag electrode with solution processed Ag nanowire (AgNW) electrodes shows the highest light utilization efficiency of 5.26% for semi-transparent OSC with a PCE of 9.07% and average visible transmission of 58%.