REGULUS is an Iodine-based electric propulsion system. It has been designed and manufactured at the Italian company Technology for Propulsion and Innovation SpA (T4i). REGULUS integrates the Magnetically Enhanced Plasma Thruster (MEPT) and its subsystems, namely electronics, fluidic, and thermo-structural in a volume of 1.5 U. The mass envelope is 2.5 kg, including propellant. REGULUS targets CubeSat platforms larger than 6 U and CubeSat carriers. A thrust T = 0.60 mN and a specific impulse Isp = 600 s are achieved with an input power of P = 50 W; the nominal total impulse is Itot = 3000 Ns. REGULUS has been integrated on-board of the UniSat-7 satellite and its In-orbit Demonstration (IoD) is currently ongoing. The principal topics addressed in this work are: (i) design of REGULUS, (ii) comparison of the propulsive performance obtained operating the MEPT with different propellants, namely Xenon and Iodine, (iii) qualification and acceptance tests, (iv) plume analysis, (v) the IoD.
A combined double-sensor architecture, laser and camera, and a new algorithm named RLPF are presented as a solution to the problem of identifying and localizing a pallet, the position and angle of which are a priori known with large uncertainty. Solving this task for autonomous robot forklifts is of great value for logistics industry. The state-of-the-art is described to show how our approach overcomes the limitations of using either laser ranging or vision. An extensive experimental campaign and uncertainty analysis are presented. For the docking task, new dynamic nonlinear path planning which takes into account vehicle dynamics is proposed.
A study on vortex injection in hybrid rocket engines with nitrous oxide and paraffin has been performed. The investigation followed two paths: first, the flowfield was simulated with a commercial computational fluid dynamics code; then, burn tests were performed on a laboratory-scale rocket. The computational fluid dynamics analysis had the dual purpose to help the design of the laboratory motor and to understand the physics underlying the vortex flow coupled with the combustion process compared with axial injection. Vortex injection produces a more diffuse flame in the combustion chamber and improves the mixing process of the reactants, both aspects concurring to increase the c efficiency. A helical streamline develops downstream of the injection region, and the pitch is highly influenced by combustion, which straightens the flow due to the acceleration in the axial direction imposed by the temperature rise. Experimental tests with similar geometry have been performed. Measured performance shows an increase in regression rate up to 51% and a c efficiency that rises from less than 80% with axial injection up to more than 90% with vortex injection. Moreover, a reduction of the instabilities in the chamber pressure has been measured.
Nomenclature
A t= nozzle throat area a = multiplication coefficient for regression rate G ox = mass flux in combustion chamber L g = grain length M f = mass of burned fuel M m = molar mass _ m tot = mean total mass flow n = exponential coefficient for regression rate O∕F = oxidizer to fuel mass ratio p, pc = pressure, mean chamber pressure R u = universal gas constant r = radial coordinate T = temperature t = time u r , u z , u θ = radial, tangential, and axial velocity z = axial coordinate μ = dynamic viscosity ρ f = density of fuel ρ = density ϕ i , ϕ e , ϕ m = initial, final, and mean diameter of the grain ω = vortex angular velocity
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.