No abstract

Three samples were selected representing bread, soft, and durum wheat. Uniaxial compression and stress relaxation tests were performed on wheat kernels. Force‐deformation curves from intact wheat grain typically exhibited at least two points of inflection (PI) at ≈0.1 and 0.2 mm displacement. The first PI is related to the mechanical properties of all the bran layers. The second PI (0.2 mm) seems to be the endosperm boundary near the aleurone layer. These structures had higher degree of elasticity (DE) compared to the inner endosperm (0.5–0.6 mm). Besides wheat class and specific structures of the caryopsis, moisture content is a prominent factor affecting the mechanical strength of kernels. Stress relaxation tests show that bread wheat kernels with 69.2% DE at 13% moisture decreased to 31.6% DE with additional 6% moisture content. Soft wheat kernels DE of 61.0% at 13% moisture decreased to 22.7% at 19.7% moisture. Stress relaxation revealed pronounced time‐dependence. However, the differences of stress values at 120–180 sec were not significant in all wheat classes and moisture contents evaluated. The stress values after 120 sec might be attributed to the elastic deformation of the kernels.

No abstract

Cereal Chem. 90(6):558-563Wheat product quality is related to its physicochemical properties and to the viscoelastic properties of the kernel. The aim of this work was to evaluate the viscoelastic properties of individual wheat kernels using the uniaxial compression test under small strain (3%) to create experimental conditions that allow the use of the elasticity theory to explain the wheat kernel viscoelasticity and its relationships to physicochemical characteristics, such as weight tests, size, and ash and protein contents. The following viscoelastic properties of the kernels of hard and soft wheat cultivars at two different moisture contents (original and tempered at 15%) were evaluated: total work (W t ), elastic work (W e ), plastic work (W p ), and modulus of elasticity (E). There was a significant decrease in W t as the mois-ture content increased. In the soft wheat Saturno, W t decreased 80% (from 0.217 to 0.044 N⋅mm) as the moisture content increased. Individual wheat kernels at their original moisture content showed higher W e than under the tempered condition. W p increased as the moisture content increased. E decreased as the moisture content increased. The soft wheat Saturno showed the highest decline (54.9%) in E (from 14.18 to 6.39 MPa) as the moisture content increased. There were significant negative relationships between the viscoelastic properties and the 1,000-kernel weight and kernel thickness. The uniaxial compression test under small strain can be applied to evaluate the viscoelastic properties of individual wheat kernels from different classes and cultivars.