In recent years, magnetism has gained an enormous amount of interest among researchers for actuating different sizes and types of bio/soft robots, which can be via an electromagnetic‐coil system, or a system of moving permanent magnets. Different actuation strategies are used in robots with magnetic actuation having a number of advantages in possible realization of microscale robots such as bioinspired microrobots, tetherless microrobots, cellular microrobots, or even normal size soft robots such as electromagnetic soft robots and medical robots. This review provides a summary of recent research in magnetically actuated bio/soft robots, discussing fabrication processes and actuation methods together with relevant applications in biomedical area and discusses future prospects of this way of actuation for possible improvements in performance of different types of bio/soft robots.
The composition of fine-ground lead zirconate-titanate powder Pb(Zr0.52Ti0.48)O3, suspended in PZT and bismuth titanate (BiT) solutions, is deposited on the curved surface of IN718 and IN738 nickel-based supper alloy substrates up to 100 µm thickness. Photochemical metal organic and infiltration techniques are implemented to produce smooth, semi-dense, and crack-free random orientated thick piezoelectric films as piezo-sensors, free of any dopants or thickening polymers. Every single layer of the deposited films is heated at 200 °C with 10 wt.% excess PbO, irradiated by ultraviolet lamp (365 nm, 6 watt) for 10 min, pyrolyzed at 400 °C, and subsequently annealed at 700 °C for one hour. This process is repeated successively until reaching the desired thickness. Au and Pt thin films are deposited as the bottom and top electrodes using evaporation and sputtering methods, respectively. PZT/PZT and PZT/BiT composite films are then characterized and compared to similar PZT and BiT thick films deposited on the similar substrates. The effect of the composition and deposition process is also investigated on the crystalline phase development and microstructure morphology as well as the dielectric, ferroelectric, and piezoelectric properties of piezo-films. The maximum remnant polarization of Pr = 22.37 ± 0.01, 30.01 ± 0.01 µC/cm2, the permittivity of εr = 298 ± 3, 566 ± 5, and piezoelectric charge coefficient of d33 = 126, 148 m/V were measured versus the minimum coercive field of Ec = 50, 20 kV/cm for the PZT/PZT and PZT/BiT thick films, respectively. The thick film piezo-sensors are developed to be potentially used at frequency bandwidth of 1–5 MHz for rotary structural health monitoring and also in other industrial or medical applications as a transceiver.
The design of robots that are light, soft, powerful is a grand challenge. Since they can easily adapt to dynamic environments, soft robotic systems have the potential of changing the status-quo of bulky robotics. A crucial component of soft robotics is a soft actuator that is activated by external stimuli to generate desired motions. Unfortunately, there is a lack of powerful soft actuators that operate through lightweight power sources. To that end, we recently designed a highly scalable, flexible, biocompatible Electromagnetic Soft Actuator (ESA). With ESAs, artificial muscles can be designed by integrating a network of ESAs. The main research gap addressed in this work is in the absence of system-theoretic understanding of the impact of the realtime control and actuator selection algorithms on the performance of networked soft-body actuators and ESAs. The objective of this paper is to establish a framework that guides the analysis and robust control of networked ESAs. A novel ESA is described, and a configuration of soft actuator matrix to resemble artificial muscle fiber is presented. A mathematical model which depicts the physical network is derived, considering the disturbances due to external forces and linearization errors as an integral part of this model. Then, a robust control and minimal actuator selection problem with logistic constraints and control input bounds is formulated, and tractable computational routines are proposed with numerical case studies.
This paper presents a design optimization framework based on Branch and Bound Algorithm for novel networked electromagnetic soft actuators. The soft actuators work based on the operating principle of solenoids but are made of intrinsically soft materials. We confirmed that by scaling down the size of the soft actuators, their force to volume ratio increases. This suggests that by miniaturizing the actuators size and attaching them as a network based on the arrangement of actin and myosin filaments in skeletal muscles, the output force can be enhanced. In order to achieve the maximum output force, design parameters of a single soft actuator as well as those of a network are considered as design variables. The maximum available volume (thickness, width and length) and deflection range of the network are considered design constraints. The cost function, i.e. the output force is a non-linear mixed-integer function. A Branch and Bound optimization algorithm based on interval analysis is then proposed to solve the optimization problem. Numerical simulations are presented for a representative example of an active soft brace for the human elbow joint. The results suggest that an electromagnetic soft actuator network can provide sufficient torque to be used as a drive train for an active elbow brace for both flexion and extension over a range of around 93 degrees.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.