A multiple Faraday cup assembly has been developed for measuring pulsed ion beam of a low energy plasma focus device. The Faraday cups operating in biased ion collector mode have nanosecond response and these have been used to determine the energy spectrum and flux of fast nitrogen ion beam emerging out of the pinched plasma column. The design feature that makes our Faraday cups unique is that they can register ion energy of higher kinetic value (∼hundreds of keV) as well as lower kinetic value (∼keV). It has been possible to register the ion energy upto a lower kinetic energy threshold of ∼5 keV which is a value much lower than that obtained in any previous works. The correlation of the ion beam flux with filling gas pressure is also reported. Angular distribution of ion measurement reveals a highly anisotropic emission indicating an ion dip at the electrode axis.

An investigation on the soft x rays emitted in a 2.2 kJ Mather-type dense plasma focus device using a multichannel diode spectrometer and a simple pinhole camera is reported. Emitted x rays associated with different shapes (hollow, solid, and hemispherical) of anode and in hydrogen/nitrogen gas medium are compared. The structure of x-ray emitting sites as well as x-ray yields were found to be strongly influenced by the shape of the anode and the filling gas pressure. The maximum yield of 2.2 J into 4π sr was obtained in the case of hemispherical anode in hydrogen gas medium. The x-ray pinhole images of the collapsed plasma with the hemispherical anode indicated spot-like structure having 500–800 μm in diameter. On the contrary, other anode shapes showed columnar pinched structure of 8–10 mm in length and 1–2 mm in diameter. Results indicated that an appropriate design of the anode could enhance the x-ray yield by more than tenfold in a conventional low energy dense plasma focus device.

A comparative study on the ion emission characteristics such as flux and energy, and their variation in angular positions and operating gas pressures has been carried out in a nitrogen-filling plasma focus device. Three different designs of cylindrical anode (central electrode) having hollow, solid and hemispherical tip have been tested for this study. The ion emission characteristics were investigated by employing three Faraday cups at various angular positions. The ion flux depends on the operating gas pressure irrespective of the anode designs and the maximum ion flux is found to be in the pressure range 0.3 to 0.5 Torr for all the anode designs. The hemispherical anode yields highest ion flux while the hollow anode emits lowest ion flux. The angular variation of ion flux is seen to be anisotropic irrespective of the anode designs with an ion dip at 0 (axis of the device) and maximal at 5 angular positions. The anisotropic character of ion emission is less in the case of the hemispherical anode than the hollow anode. The ion energy, measured by the time of flight method, shows its dependence on the anode designs. The maximum ion energy is found to be around 830 keV at an angular position 5 in the case of the hemispherical anode design. The most probable ions are found to be with energy less than 100 keV irrespective of the anode designs and the angular positions. This study indicates that the plasma focus device could be optimized to a great extent for optimal ions yield by using an appropriate anode design.

The Helicon Plasma Source (HeliPS) designed and developed at the Centre of Plasma Physics-Institute for Plasma Research is a versatile helicon plasma device, which operates in a wide range of magnetic field configurations from 50 G to 500 G. This device is dedicated to perform a broad range of research activities. The main objective for development of the HeliPS is to carry out studies on ion-ion plasmas in electronegative gases. In the near future, ion-ion plasmas will be formed in electronegative gases in the downstream of the plasma production region. Although the system is primarily designed to carry out ion-ion plasma experiments, the same system can also be used for experimental studies on some basic helicon plasma properties such as wave propagation, wave coupling, and plasma instability. At present, argon plasma is produced with a RF power supply of 13.56 MHz frequency. External circuit parameters, such as antenna current, plasma resistance (R), and internal parameters, such as electron density and temperature, are measured. The details of the experimental setup development, device characteristic, as well as preliminary plasma production and characterization to confirm occurrence of the helicon plasma in the system are presented in this article.

A high-frequency multiple magnetic probe assembly has been specifically fabricated for the study of current sheet dynamics in the axial acceleration phase of a low-energy dense plasma focus (DPF) device operated in a nitrogen gas medium. The response time of each probe is of the order of 1 ns and the tiny structure of the probe is well suited to sense the magnetic field associated with a pulsed plasma without perturbing the plasma unduly. The magnetic probes were calibrated using a simple, novel and reliable calibration technique and the calibration factor is found to be 0.34 ± 0.028 T V−1. Our study reveals that the parabolic current sheet accelerates as it propagates through the electrode assembly, reaching a rundown velocity of ∼6.1 cm µs−1. The average current sheet thickness in the axial acceleration phase is found to be ∼3  cm. In our case, the current shedding and mass loss factors are estimated to be 32% and 40% respectively. Our approach of using a high-frequency multiple magnetic probe assembly for the study of current sheet dynamics in a DPF device is highly effective in obtaining precise and accurate measurements.