Hot compression tests were carried out on a Gleeble-3800 thermal mechanical simulator in the temperature range from 700 to 900 °C and strain rate range from 0.005 to 10 s−1 to investigate the hot deformation behavior of B1500HS high-strength steel. Softening mechanisms of B1500HS high-strength steel under different deformation conditions were analyzed according to the characteristics of flow stress–strain curves. By analyzing and processing the experimental data, the values of steady flow stress, saturated stress, dynamic recovery (DRV) softening coefficient, and other factors were solved and these parameters were expressed as functions of Zener–Hollomon factors. Based on the dislocation density theory and the kinetic model of dynamic recrystallization (DRX), constitutive models corresponding to different softening mechanisms were established. The flow stress–strain curves of B1500HS predicted by a constitutive model are in good agreement with the experimental results and the correlation coefficient is . The comparison results indicate that the constitutive models can accurately reflect the deformation behavior of B1500HS high-strength steel under different conditions.

Most of the Neural Machine Translation (NMT) models are based on the sequence-tosequence (Seq2Seq) model with an encoderdecoder framework equipped with the attention mechanism. However, the conventional attention mechanism treats the decoding at each time step equally with the same matrix, which is problematic since the softness of the attention for different types of words (e.g. content words and function words) should differ. Therefore, we propose a new model with a mechanism called Self-Adaptive Control of Temperature (SACT) to control the softness of attention by means of an attention temperature. Experimental results on the Chinese-English translation and English-Vietnamese translation demonstrate that our model outperforms the baseline models, and the analysis and the case study show that our model can attend to the most relevant elements in the source-side contexts and generate the translation of high quality.

Recently, the research on monocular 3D target detection based on pseudo-LiDAR data has made some progress. In contrast to LiDAR-based algorithms, the robustness of pseudo-LiDAR methods is still inferior. After conducting in-depth experiments, we realized that the main limitations are due to the inaccuracy of the target position and the uncertainty in the depth distribution of the foreground target. These two problems arise from the inaccurate depth estimation. To deal with the aforementioned problems, we propose two innovative solutions. The first is a novel method based on joint image segmentation and geometric constraints, used to predict the target depth and provide the depth prediction confidence measure. The predicted target depth is fused with the overall depth of the scene and results in the optimal target position. For the second, we utilize the target scale, normalized with the Gaussian function, as a priori information. The uncertainty of depth distribution, which can be visualized as long-tail noise, is reduced. With the refined depth information, we convert the optimized depth map into the point cloud representation, called a pseudo-LiDAR point cloud. Finally, we input the pseudo-LiDAR point cloud to the LiDAR-based algorithm to detect the 3D target. We conducted extensive experiments on the challenging KITTI dataset. The results demonstrate that our proposed framework outperforms various state-of-the-art methods by more than 12.37% and 5.34% on the easy and hard settings of the KITTI validation subset, respectively. On the KITTI test set, our framework also outperformed state-of-the-art methods by 5.1% and 1.76% on the easy and hard settings, respectively.

It is intuitive that NLP tasks for logographic languages like Chinese should benefit from the use of the glyph information in those languages. However, due to the lack of rich pictographic evidence in glyphs and the weak generalization ability of standard computer vision models on character data, an effective way to utilize the glyph information remains to be found. In this paper, we address this gap by presenting Glyce, the glyph-vectors for Chinese character representations. We make three major innovations: (1) We use historical Chinese scripts (e.g., bronzeware script, seal script, traditional Chinese, etc) to enrich the pictographic evidence in characters; (2) We design CNN structures (called tianzege-CNN) tailored to Chinese character image processing; and (3) We use image-classification as an auxiliary task in a multi-task learning setup to increase the model's ability to generalize. We show that glyph-based models are able to consistently outperform word/char ID-based models in a wide range of Chinese NLP tasks. We are able to set new stateof-the-art results for a variety of Chinese NLP tasks, including tagging (NER, CWS, POS), sentence pair classification, single sentence classification tasks, dependency parsing, and semantic role labeling. For example, the proposed model achieves an F1 score of 80.6 on the OntoNotes dataset of NER, +1.5 over BERT; it achieves an almost perfect accuracy of 99.8% on the Fudan corpus for text classification. 1 2 3

Isothermal hot compression tests of TC4–DT titanium alloy were performed under temperatures of 1203–1293 K and strain rates of 0.001–10 s−1. The purpose of this study is to develop a new high-precision modified constitutive model that can describe the deformation behavior of TC4–DT titanium alloy. Both the modified strain-compensated Arrhenius-type equation and the modified Hensel–Spittel equation were established by revising the strain rate. The parameters in the above two modified constitutive equation were solved by combining regression analysis with iterative methods, which was used instead on the traditional linear regression methods. In addition, both the original strain-compensated Arrhenius-type equation and Hensel–Spittel equation were established to compare with the new modified constitutive equations. A comparison of the predicted values based on the four constitutive equations was performed via relative error, average absolute relative error (AARE) and the correlation coefficient (R). These results show the modified Arrhenius-type equation and the modified Hensel–Spittel equation is more accurate and efficient with a similar prediction accuracy. The AARE-value of the two modified constitutive equation is relatively low under various strain rates and their fluctuation is small as the strain rate changes.