With the growing interest in high-flux solar sources, a need exists for simple, accurate, and inexpensive strategies to characterize their output radiative flux. In this paper, the irradiation output from a 10 kWe xenon lamp solar simulator is characterized by an inverse mapping technique that uses a custom radiometer and infrared camera, validated by a direct characterization method (heat flux gauge). The heat flux distribution is determined in a vacuum chamber using an easily obtainable graphite target and an inverse heat transfer model. The solar simulator produces peak fluxes in the range of 1.5–4.5 MW/m2 as measured directly by a heat flux gauge, and its output can be controlled using a variable power supply. Spectral measurements indicate that minor variations in the simulator’s output with respect to its current supply occur in the spectral range of 450–800 nm. The radiometer presented in this work allows for characterizing solar irradiation under practical conditions (e.g., inside a solar reactor) and thus accounts for deviations due to additional components, such as viewport effects. Additionally, it provides an inexpensive and efficient means of monitoring any deterioration in the performance of solar sources over time without the need for complex recalibration.
This work reports a process in which concentrated irradiation from a simulated solar source converts methane to high-value graphitic carbon and hydrogen gas. Methane flows within a photo-thermal reactor through the pores of a thin substrate irradiated by several thousand suns at the focal peak. The methane decomposes primarily into hydrogen while depositing highly graphitic carbon that grows conformally over ligaments in the porous substrate. The localized solar heating of the porous substrate serves to capture the solid carbon into a readily extractable and useful form while maintaining active deposition site density with persistent catalytic activity. Results indicate a strong temperature dependence with high decomposition occurring in the central heating zone with concentration factors and temperatures above 1000 suns and 1300 K, respectively. Even with a large flow area through regions of lower irradiation and temperature, methane conversion and hydrogen yields of approx. 70\% are achieved, and 58\% of the inlet carbon is captured in graphitic form.
Manufacturing processes are often highly energy-intensive, even when the energy is primarily used for direct heating processes. The required energy tends to derive from local utilities, which currently employ a blend of sources ranging from fossil fuels to renewable wind and solar photovoltaics, among others, when the end manufacturing need is thermal energy. Direct solar-thermal capture provides a compelling alternative that utilizes renewable energy to reduce greenhouse gas emissions from industrial processes, but one that has rarely been employed to date. In this study, a 10 kW[Formula: see text] custom-built high flux solar simulator (HFSS) that closely approximates the solar spectrum produces a heat flux distribution with an adjustable peak between 1.5 and 4.5 MW/m[Formula: see text]. The HFSS system is coupled to a cold-wall chemical vapor deposition (CVD) system that is equipped to automate graphene synthesis while providing safe operation, precise control, and real-time monitoring of process parameters. A numerical heat transfer model of a thin copper substrate is derived and validated to compute the substrate’s temperature profile prior to the synthesis process. The peak substrate temperature is correlated to the HFSS supply current and vacuum pressure, as it serves as a critical design parameter during graphene synthesis. We report the synthesis of high-quality graphene films on copper substrates with an average Raman peak intensity ratio [Formula: see text] of 0.17. Backscattered electron microscopy reveals a characteristic grain size of 120 [Formula: see text]m, with an area ratio of 16 when compared to that of low-quality graphene on copper. The reported solar-thermal CVD system demonstrates the ability to produce a high-value product, namely, graphene on copper, directly from a renewable energy resource with process control and automation that enables synthesis under a variety of conditions.
This paper presents characterization of a new high flux solar simulator consisting of a 10 kW Xenon arc via indirect heat flux mapping technique for solar thermochemical applications. The method incorporates the use of a heat flux gauge (HFG), single Lambertian target, complementary metal oxide semiconductor (CMOS) camera, and three-axis optical alignment assembly. The grayscale values are correlated to heat flux values for faster optimization and characterization of the radiation source. Unlike previous work in heat flux characterization that rely on two Lambertian targets, this study implements the use of a single target to eliminate possible errors due to interchanging the targets. The current supplied to the simulator was varied within the range of 120–200 A to change the total power and to mimic the fluctuation in sun's irradiance. Several characteristic parameters of the simulator were studied, including the temporal instability and radial nonuniformity (RNU). In addition, a sensitivity analysis was performed on the number of images captured, which showed a threshold value of at least 30 images for essentially accurate results. The results showed that the flux distribution obtained on a 10 × 10 cm2 target had a peak flux of 6990 kWm−2, total power of 3.49 kW, and half width of 6.25 mm. The study concludes with the illustration and use of a new technique, the merging method, that allows characterization of heat flux distributions on larger areas, which is a promising addition to the present heat flux characterization techniques.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.