This paper presents the results of the investigation associated with the determination of mercury content in Polish hard coal and lignite samples. Those coals are major fuels used for electricity generation in Poland. The results indicated that the average content of mercury in the coal samples was roughly about 100 ng/g. Apart from the determination of the mercury contents a detailed ultimate and proximate analysis of the coal samples was also carried out. The relationships between the mercury content and ash, as well as fi xed carbon, volatile matter, sulfur, and high heating value of the coal samples were also established. Furthermore, the effect of coal enrichment was also investigated, and it was found that the enrichment process enabled the removal of up to 75% of the coal mercury from the samples.
Biochar application has been reported to improve the physical, chemical, and hydrological properties of soil. However, the information about the size fraction composition of the applied biochar as a factor that may have an impact on the properties of soil‑biochar mixtures is often underappreciated. Our research shows how sunflower husk biochar (pyrolyzed at 650 °C) can modify the water retention characteristics of arable sandy soil depending on the biochar dose (up to 9.52 wt.%) and particle size (<50 µm, 50–100 µm, 100–250 µm). For comparison, we used soil samples mixed with biochar passed through 2 mm sieve and an unamended reference. The addition of sieved biochar to the soil caused a 30% increase in the available water content (AWC) in comparing to the soil without biochar. However, the most notable improvement (doubling the reference AWC value from 0.078 m3 m−3 to 0.157 m3 m−3) was observed at the lowest doses of biochar (0.95 and 2.24 wt.%) and for the finest size fractions (below 100 µm). The water retention effects on sandy soil are explained as the interplay between the dose, the size of biochar particles, and the porous properties of biochar fractions.
Organic matter is an indispensable element of soil. Its quantity and quality affect its properties, e.g., structure, buffering, sorption capacity, air–water relations, and thermal properties. The purpose of the research was to assess greenhouse gas (GHG) emissions in soybean cultivation, fertilized with biochar from various crops. Two experimental factors were included: the dose of biochar and the type of biochar used as per raw material used in its production. The adopted functional unit was 1 ton of soybeans. To reach the adopted goal, a strict field experiment was carried out. The total amount of GHG emitted by the cultivation was calculated according to the ISO 14040 and ISO 14044 standards. The system boundaries included: GHG emissions from fertilizers and seeds used, GHG emissions related to biochar production, emissions related to fossil fuel combustion, and emissions related to the decomposition of crop residues and soil organic matter and the decomposition of biochar. The results of the research indicate a significant potential of biochar to reduce GHG emissions in agricultural production. From the environmental and production perspective, the addition of biochar at 60 Mg ha−1 is the most advantageous. A further increase in the addition of biochar was related to a decrease in plant yield and an increase in GHG emissions per functional unit of the product. The use of biochar in soybean cultivation resulted in a 25% reduction in GHG emissions compared to the object without the biochar addition. The amount of GHG emissions for soybeans ranged from 846.9 to 1260.1 kg of CO2/Mg. The use of biochar from forest biomass resulted in a higher yield, 12% on average, compared to sunflower husk biochar. The introduction of biochar to soils can be an effective improvement in the economic and environmental efficiency of plant production, as it increases the use of nutrients by the plant and intensifies carbon sequestration in soils.
Abstract. Photovoltaic installations are becoming an increasingly important player in the global renewable energy production market. The biggest disadvantage of photovoltaic installations is their high price, and relatively low efficiency. Photovoltaic cells achieve a theoretical efficiency of 30%, but in real conditions this efficiency is much lower at roughly 15%. Photovoltaic installations are particularly recommended in locations where the amount of solar radiation is high and where photovoltaic installations will be able to work at full capacity for most of the year. The paper presents an analysis of the work of a photovoltaic installation built for a roofed car park located in eastern Cairo, the capital of Egypt. The installation is built for a car park located at the Schlumberger company. The installation is built of 1344 Hanwha Q.Power L-G325 silicon polycrystalline cell modules, each module has a power of 325 Wp, and the total area of the installation is 2,611 m 2 . Effective irradiance on collectors is 1922 kWh/m 2 . The array's nominal produced energy was 840 MWh/year, the amount of electricity injected into the grid was 587 MWh/year, which means that the calculated performance ratio was 0.62.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.