Anion exchange membrane fuel cells (AEMFCs) have attracted extensive attention in the recent years, primarily due to the distinct advantage potentials they have over the mainstream proton exchange membrane fuel cells. The anion exchange membrane (AEM) is the key component of AEMFC systems. Due to the unique characteristics of water management in AEMFCs, understanding the water mobility through AEMs is key for this technology, as it significantly affects (and limits) overall cell performances. This work presents a study of the equilibrium state and kinetics of water uptake (WU) for AEMs exposed to vapor source H2O. We investigate different AEMs that exhibit diverse water uptake behaviors. AEMs containing different backbones (fluorinated and hydrocarbon-based backbones) and different functional groups (various cations as part of the backbone or as pendant groups) were studied. Equilibrium WU isotherms are measured and fitted by the Park model. The influence of relative humidity and temperature is also studied for both equilibrium and dynamic WU. A characteristic time constant is used to describe WU kinetics during the H2O sorption process. To the best of our knowledge, this is the first time that WU kinetics has been thoroughly investigated on AEMs containing different backbones and cationic functional groups. The method and analysis described in this work provides critical insights to assist with the design of the next generation anion conducting polymer electrolytes and membranes for use in advanced, high-performance AEMFCs.

Abstract:We have developed ah ighly active nanostructured iridium catalyst for anodes of proton exchange membrane (PEM) electrolysis.C lusters of nanosized crystallites are obtained by reducing surfactant-stabilized IrCl 3 in water-free conditions.T he catalyst shows af ive-fold higher activity towards oxygen evolution reaction (OER) than commercial Ir-black. The improved kinetics of the catalyst are reflected in the high performance of the PEM electrolyzer (1 mg Ir cm À2 ), showing an unparalleled low overpotential and negligible degradation. Our results demonstrate that this enhancement cannot be only attributed to increased surface area, but rather to the ligand effect and low coordinate sites resulting in ahigh turnover frequency (TOF). The catalyst developed herein sets ab enchmark and as trategy for the development of ultra-low loading catalyst layers for PEM electrolysis.

A quantitative in situ investigation of the structure of the catalytic layer of polymer electrolyte membrane fuel cells using material-sensitive and conductive atomic force microscopy is reported. The distribution and size of the ionomer phase at the surface of the catalytic layer is retrieved from adhesion force mappings, measured at high humidity and up to 75 °C. The average ionomer layer thickness varies between 7 and 13 nm for three differently prepared samples, as concluded from the histograms. Evidence of a lamellar structure of the thinner ionomer layers is presented. A significant thinning of the ionomer layers after long-term fuel cell operation is observed.

The conductivity of fuel cell membranes as well as their mechanical properties at the nanometer scale were characterized using advanced tapping mode atomic force microscopy (AFM) techniques. AFM produces high-resolution images under continuous current flow of the conductive structure at the membrane surface and provides some insight into the bulk conducting network in Nafion membranes. The correlation of conductivity with other mechanical properties, such as adhesion force, deformation and stiffness, were simultaneously measured with the current and provided an indication of subsurface phase separations and phase distribution at the surface of the membrane. The distribution of conductive pores at the surface was identified by the formation of water droplets. A comparison of nanostructure models with high-resolution current images is discussed in detail.

Abstract:We have developed ah ighly active nanostructured iridium catalyst for anodes of proton exchange membrane (PEM) electrolysis.C lusters of nanosized crystallites are obtained by reducing surfactant-stabilized IrCl 3 in water-free conditions.T he catalyst shows af ive-fold higher activity towards oxygen evolution reaction (OER) than commercial Ir-black. The improved kinetics of the catalyst are reflected in the high performance of the PEM electrolyzer (1 mg Ir cm À2 ), showing an unparalleled low overpotential and negligible degradation. Our results demonstrate that this enhancement cannot be only attributed to increased surface area, but rather to the ligand effect and low coordinate sites resulting in ahigh turnover frequency (TOF). The catalyst developed herein sets ab enchmark and as trategy for the development of ultra-low loading catalyst layers for PEM electrolysis.