Metal nanoparticles are commonly supported on metal oxides, but their utility as catalysts is limited by coarsening at high temperatures. Rhodium oxide and rhodium metal nanoparticles on niobate and tantalate supports are anomalously stable. To understand this, the nanoparticle-support interaction was studied by isothermal titration calorimetry (ITC), environmental transmission electron microscopy (ETEM), and synchrotron X-ray absorption and scattering techniques. Nanosheets derived from the layered oxides KCa2Nb3O10, K4Nb6O17, and RbTaO3 were compared as supports to nanosheets of Na-TSM, a synthetic fluoromica (Na0.66Mg2.68(Si3.98Al0.02)O10.02F1.96), and α-Zr(HPO4)2·H2O. High surface area SiO2 and γ-Al2O3 supports were also used for comparison in the ITC experiments. A Born-Haber cycle analysis of ITC data revealed an exothermic interaction between Rh(OH)3 nanoparticles and the layered niobate and tantalate supports, with ΔH values in the range -32 kJ·mol(-1) Rh to -37 kJ·mol(-1) Rh. In contrast, the interaction enthalpy was positive with SiO2 and γ-Al2O3 supports. The strong interfacial bonding in the former case led to "reverse" ripening of micrometer-size Rh(OH)3, which dispersed as 0.5 to 2 nm particles on the niobate and tantalate supports. In contrast, particles grown on Na-TSM and α-Zr(HPO4)2·H2O nanosheets were larger and had a broad size distribution. ETEM, X-ray absorption spectroscopy, and pair distribution function analyses were used to study the growth of supported nanoparticles under oxidizing and reducing conditions, as well as the transformation from Rh(OH)3 to Rh nanoparticles. Interfacial covalent bonding, possibly strengthened by d-electron acid/base interactions, appear to stabilize Rh(OH)3, Rh2O3, and Rh nanoparticles on niobate and tantalate supports.

Water-splitting dye-sensitized photoelectrochemical cells (WS-DSPECs) utilize high surface area TiO2 electrodes functionalized with light absorbing sensitizers and water oxidation catalysts. Because water splitting requires vectorial electron transfer from the catalyst to the sensitizer to the TiO2 surface, attaching both sensitizer and catalyst to TiO2 in the correct sequence and stabilizing them under photoelectrochemical conditions has been a challenging problem. Rutile-phase IrO2 nanoparticles can be deposited directly on the TiO2 electrode by adsorbing citrate-capped amorphous IrO x and then sintering at 450 °C. Electrodes functionalized with these nanocrystalline particles show higher activity than those made from ligand-capped amorphous IrO x without sintering. In the WS-DSPEC, the Coulombic efficiency for oxygen evolution from the sintered nanoparticle photoelectrodes was near unity. The loading of colloidal IrO x and IrO2 particles onto the porous TiO2 electrodes was quantified by neutron activation analysis. Photovoltage measurements suggest that at high catalyst loading the dominant charge recombination pathway is from photoinjected electrons to IrO2.

The interfacial interactions between late transition metal/metal oxide nanoparticles and oxide supports impact catalysts’ activity and stability. Here, we report the use of isothermal titration calorimetry (ITC), electron microscopy and density functional theory (DFT) to explore periodic trends in the heats of nanoparticle-support interactions for late transition metal and metal oxide nanoparticles on layered niobate and silicate supports. Data for Co(OH)2, hydroxyiridate-capped IrOx.nH2O, Ni(OH)2, CuO, and Ag2O nanoparticles were added to previously reported data for Rh(OH)3 grown on nanosheets of TBA0.24H0.76Ca2Nb3O10 and a layered silicate. ITC measurements showed stronger bonding energies in the order Ag < Cu ≈ Ni ≈ Co < Rh < Ir on the niobate support, as expected from trends in M-O bond energies. Nanoparticles with exothermic heats of interaction were stabilized against sintering as revealed by temperature resolved images recorded using transmission electron microscopy. In contrast, ITC measurements showed endothermic interactions of Cu, Ni, and Rh oxide/hydroxide nanoparticles with the silicate and poor resistance to sintering. These trends in interfacial energies were corroborated by DFT calculations using single-atom and four-atom cluster models of surface-bound metal/metal oxide nanoparticles. Density of states and charge density difference calculations reveal that strongly bonded metals (Rh, Ir) transfer d-electron density from the adsorbed cluster to niobium atoms in the support; this mixing is absent in weakly binding metals, such as Ag and Au, and in all metals on the layered silicate support. The large differences between the behavior of nanoparticles on niobate and silicate supports highlight the importance of d-orbital interactions between the nanoparticle and support in controlling the nanoparticles’ stability.

Soluble, monomeric Ir(III/IV) complexes strongly affect the photoelectrochemical performance of IrO(x)·nH2O-catalyzed photoanodes for the oxygen evolution reaction (OER). The synthesis of IrO(x)·nH2O colloids by alkaline hydrolysis of Ir(III) or Ir(IV) salts proceeds through monomeric intermediates that were characterized using electrochemical and spectroscopic methods and modeled in TDDFT calculations. In air-saturated solutions, the monomers exist in a mixture of Ir(III) and Ir(IV) oxidation states, where the most likely formulations at pH 13 are [Ir(OH)5(H2O)](2-) and [Ir(OH)6](2-), respectively. These monomeric anions strongly adsorb onto IrO(x)·nH2O colloids but can be removed by precipitation of the colloids with isopropanol. The monomeric anions strongly adsorb onto TiO2, and they promote the adsorption of ligand-free IrO(x)·nH2O colloids onto mesoporous titania photoanodes. However, the reversible adsorption/desorption of electroactive monomers effectively short-circuits the photoanode redox cycle and thus dramatically degrades the photoelectrochemical performance of the cell. The growth of a dense TiO2 barrier layer prevents access of soluble monomeric anions to the interface between the oxide semiconductor and the electrode back contact (a fluorinated tin oxide transparent conductor) and leads to improved photoanode performance. Purified IrO(x)·nH2O colloids, which contain no adsorbed monomer, give improved performance at the same electrodes. These results explain earlier observations that IrO(x)·nH2O catalysts can dramatically degrade the performance of metal oxide photoanodes for the OER reaction.

The loss of centrosymmetry via oxygen octahedral rotations is demonstrated in the n = 2 Dion-Jacobson family of layered oxide perovskites, A′LaB 2 O 7 (A′ = Rb, Cs; B = Nb, Ta). Ab initio density functional theory calculations predict that all four materials should adopt polar space groups, in contrast to the results of previous experimental studies that have assigned these materials to the centrosymmetric P4/ mmm space group. Optical second harmonic generation experiments confi rm the presence of a noncentrosymmetric phase at ambient temperature. Piezoresponse force microscopy experiments also show that this phase is piezoelectric. To elucidate the symmetry-breaking and assign the appropriate space groups, the crystal structure of CsLaNb 2 O 7 is refi ned as a function of temperature from synchrotron X-ray diffraction data. Above 550 K, CsLaNb 2 O 7 adopts the previously determined centrosymmetric P4/ mmm space group. Between 550 and 350 K, the symmetry is lowered to the noncentrosymmetric space group A mm 2. Below 350 K, additional symmetry lowering is observed as peak splitting, but the space group cannot be unambiguously identifi ed.