Understanding tree susceptibility to wind damage is central to natural disturbance and succession studies. Susceptibility depends on the wind loads experienced by trees and their ability to resist these loads. In this study, we investigated the wind force or "drag" acting on the crowns of juvenile specimens of three hardwood species common to northwestern North America, black cottonwood (Populus trichocarpa Torr. & A. Gray), red alder (Alnus rubra Bong.), and paper birch (Betula papyrifera Marsh.). Ten freshly cut crowns of each species were exposed to wind speeds from 4 to 20 m/s in a wind tunnel. At 20 m/s, streamlining reduced the frontal area to 28% of its initial value for black cottonwood, 37% for red alder, and 20% for paper birch. Crown drag coefficients calculated using frontal area in still air varied with wind speed. At 20 m/s they ranged from 0.15 to 0.22 for these species. Drag was proportional to the product of mass and wind speed, and to the product of wind speed squared and wind-speed-specific frontal area. Removing branches by whole-branch pruning had little effect on drag per unit branch mass. To further investigate the effect of leaf size, we also used smaller samples of bigleaf maple (Acer macrophyllum Pursh) and trembling aspen (Populus tremuloides Michx.). Whole-crown drag coefficients did not vary systematically with leaf size, but drag per unit of crown mass increased with leaf size. Bigleaf maple had a higher drag per unit of crown mass than other species.

Estimating the wind force or drag acting on tree crowns is central to understanding both the chronic effects of wind and the calculation of critical wind speed in windthrow prediction models. The classical drag equation is problematic for porous, flexible tree crowns whose frontal area declines as wind speeds increase and branches streamline. Juvenile crowns of three morphologically different conifers, western redcedar (Thuja plicata Donn ex D. Don), western hemlock (Tsuga heterophylla (Raf.) Sarg.), and lodgepole pine (Pinus contorta Dougl. ex Loud.), were exposed to wind speeds from 4 to 20 m/s in a wind tunnel. At 20 m/s, streamlining reduced the frontal area by 54% for redcedar, 39% for hemlock, and 36% for lodgepole pine. Crown drag coefficients calculated using frontal area in still air varied with wind speed. At 20 m/s, they were 0.22, 0.47, and 0.47 for these species, respectively. Drag was proportional to the product of mass and wind speed and also to the product of wind speed squared and wind speed specific frontal area. Lodgepole pine and redcedar had lower drag per unit of branch mass than did hemlock. Removing branches by pruning had little effect on drag per unit branch mass.

We investigated tree sway and crown collision behavior of even-aged lodgepole pine (Pinus contorta Dougl. ex Loud. var. latifolia Engelm.) stands of different structure in Alberta, Canada, to examine how these factors might affect loss of leaf area as stands mature. The Two Creeks stand (TC) had high density and slender trees, while the Chickadee stand (CH) had stout trees. The TC stand was then thinned (TCT) to reduce the stand density. For each stand, simultaneous tree sways of a group of 10 trees were monitored with biaxial clinometers during wind speed of 5 m/s (canopy top). Crown collisions were reconstructed by combining sway displacement of individual trees with their respective crown dimensions. Comparing the sway statistics between stands with contrasting mean bole slenderness (TC and CH) indicated that more slender trees have greater sway displacements, faster sway speeds, and a greater depth of collision. Disturbance by thinning increased sway displacements, sway speeds, and depth of collisions at TCT. Tree sway patterns were circular in shape and not aligned with wind direction, but patterns were elongated after thinning. This demonstrates the high frequency of crown collision experienced by stands with slender trees and supports the notion that crown collisions result in empty space between crowns of trees.

The Michigan furniture industry produces >150 tons/day of wood-based waste that can be upcycled into a wood–polymer composite (WPC). This study investigated the viability of using furniture waste as a feedstock for 3-D printer filament to produce furniture components. The process involves grinding and milling board scraps made of both LDF-MDF-LDF (where LDF is light-density fill and MDF is medium-density fill) and melamine-particleboard-paper impregnated with phenolic resins, premixing wood-based powder with the biopolymer polylactic acid, extruding twice through open source recyclebots to fabricate homogeneous 3-D printable WPC filament, and printing with open source fused filament fabrication–based 3-D printers. The results indicate that there is a significant opportunity for waste-based composite WPCs to be used as 3-D printing filament.

Summary 1Crown collisions induced by tree sway are hypothesized to reduce crown closure and leaf area in maturing cold temperate forests. These declines are thought to lead to the decline in productivity when a stand ages. 2 We tethered groups of lodgepole pine ( Pinus contorta Dougl. Ex Loud. Var. latifolia Engelm.) trees in a web pattern at 10 m height, in four 15-m tall stands in western Alberta, Canada, to determine whether preventing crown collisions would increase crown cover and leaf area. 3 The stands all had less than 65% crown closure at the beginning of study. Photographs of the canopy were taken in each control and webbed plot in 1998 and at the same point in 2004. Six years after webbing, crown cover had increased by 14.4%, compared to a 2.1% increase for the control plots. 4 Webbing also resulted in significant increases in mean branch length, leaf area per branch and foliage density of individual branches from top and middle sections of the crown. Polishing of branches, caused by chronic contact with adjacent trees, was three times as common on control trees compared to webbed trees. The mean leaf area per tree was larger for the webbed trees. 5 Crowns of webbed trees were more symmetrical than those of control trees. Trees from webbed plots, however, had a decline in leaf area density. The branches of control trees were typically curved upward with twigs pointed inward, making the crowns more compact compared to the outwardly expanding crowns of trees from the webbed plots. 6 The fact that crowns expanded laterally after webbing, despite little change in light regime, provides strong evidence against the hypothesis that loss of crown closure in maturing stands is caused by a lack of light. 7 The study indicates that the decline in crown closure and leaf area in maturing and tall stands is at least partly related to wind-induced sway of trees abrading the edges of crowns.