ResumoA indústria da construção civil e montagem industrial apresentam muitas peculiaridades que refletem uma estrutura dinâmica e complexa. Dentre estas peculiaridades, podem ser citadas as relativas ao tamanho das empresas, a curta duração das obras, à sua diversidade e a rotatividade da mão-de-obra. O presente trabalho fundamenta-se na análise das ocorrências de anomalias de segurança do trabalho no ano de 2010, numa obra de construção e montagem industrial, em empresas contratadas para ampliação e modernização de uma refinaria. No entanto, o objetivo deste trabalho limita-se à elaboração, acompanhamento e monitoramento de um plano de ação, com 11 (onze) diretrizes/requisitos para o ano de 2011. Também, criouse um indicador, a fim de mensurar o andamento físico deste plano através de pesos, como acompanhamento dos resultados de implantação e avanço do plano de ação. Após realizado o monitoramento no período de 9 (nove) meses do andamento da aderência ao plano de ação, através do IAPL (Índice de Aderência ao Plano de Ação), foi realizado uma análise crítica sobre os resultados comparando os resultados de anomalias entre os anos de 2010 e 2011. Por fim, conclui-se que através da implantação do Plano de Ação e através dos resultados do IAPL (Índice de Aderência ao Plano de Ação), esse formato de sistemática para o monitoramento dos índices de objetivos e resultados específicos deve ser mantido para os próximos anos, bem como se sugere, a implementação deste trabalho nas fases iniciais dos novos empreendimentos. IntroduçãoA indústria da construção civil difere das demais em muitos aspectos, apresentando peculiariedade que refletem uma estrutura dinâmica e complexa. Dentre estas peculiariedades, podem ser citadas as relativas ao tamanho das empresas, à curta duração das obras, à sua diversidade e à rotatividade da mão-de-obra (ARAÚJO, 1998). A construção é um dos setores de atividade econômica que mais absorve acidentes de trabalho e onde o risco de acidente é maior. De acordo com as estimativas da OIT, dos aproximadamente 355 mil acidentes mortais que acontecem anualmente no mundo, pelo menos 60 mil ocorrem em obras de construção (LIMA JÚNIOR et al., 2005). Segundo Lima Júnior et al. (2005), o tema da segurança e saúde na construção é relevante não só por se tratar de uma atividade perigosa, mas também, e sobretudo porque a prevenção de acidentes de trabalho nas obras exige enfoque específico, tanto pela natureza particular do trabalho da construção como pelo caráter temporário dos centros de trabalho (obras) do setor. Assim, faz-se necessário um programa que visa implantar uma série de ações de forma a minimizar as vulnerabilidades do sistema de gestão. Muitas dessas ações dependem de atitude e comportamento pró-ativo. A palavra mudança sempre estará presente na implementação de valores de (MORAES, 2009) segurança do trabalho, por isso é tão difícil estabelecer um nível desejável a ser alcançado; sempre existirá espaço para a melhora contínua. As organizações devem sistematizar ações que possam evidenciar, na pr...
Resumo A indústria da construção civil e montagem industrial apresentam muitas peculiaridades que refletem uma estrutura dinâmica e complexa. Dentre estas peculiaridades, podem ser citadas as relativas ao tamanho das empresas, a curta duração das obras, à sua diversidade e a rotatividade da mão-de-obra. O presente trabalho fundamenta-se na análise das ocorrências de anomalias de segurança do trabalho no ano de 2010, numa obra de construção e montagem industrial, em empresas contratadas para ampliação e modernização de uma refinaria. No entanto, o objetivo deste trabalho limita-se à elaboração, acompanhamento e monitoramento de um plano de ação, com 11 (onze) diretrizes/requisitos para o ano de 2011. Também, criouse um indicador, a fim de mensurar o andamento físico deste plano através de pesos, como acompanhamento dos resultados de implantação e avanço do plano de ação. Após realizado o monitoramento no período de 9 (nove) meses do andamento da aderência ao plano de ação, através do IAPL (Índice de Aderência ao Plano de Ação), foi realizado uma análise crítica sobre os resultados comparando os resultados de anomalias entre os anos de 2010 e 2011. Por fim, conclui-se que através da implantação do Plano de Ação e através dos resultados do IAPL (Índice de Aderência ao Plano de Ação), esse formato de sistemática para o monitoramento dos índices de objetivos e resultados específicos deve ser mantido para os próximos anos, bem como se sugere, a implementação deste trabalho nas fases iniciais dos novos empreendimentos. Introdução A indústria da construção civil difere das demais em muitos aspectos, apresentando peculiariedade que refletem uma estrutura dinâmica e complexa. Dentre estas peculiariedades, podem ser citadas as relativas ao tamanho das empresas, à curta duração das obras, à sua diversidade e à rotatividade da mão-de-obra (ARAÚJO, 1998). A construção é um dos setores de atividade econômica que mais absorve acidentes de trabalho e onde o risco de acidente é maior. De acordo com as estimativas da OIT, dos aproximadamente 355 mil acidentes mortais que acontecem anualmente no mundo, pelo menos 60 mil ocorrem em obras de construção (LIMA JÚNIOR et al., 2005). Segundo Lima Júnior et al. (2005), o tema da segurança e saúde na construção é relevante não só por se tratar de uma atividade perigosa, mas também, e sobretudo porque a prevenção de acidentes de trabalho nas obras exige enfoque específico, tanto pela natureza particular do trabalho da construção como pelo caráter temporário dos centros de trabalho (obras) do setor. Assim, faz-se necessário um programa que visa implantar uma série de ações de forma a minimizar as vulnerabilidades do sistema de gestão. Muitas dessas ações dependem de atitude e comportamento pró-ativo. A palavra mudança sempre estará presente na implementação de valores de (MORAES, 2009) segurança do trabalho, por isso é tão difícil estabelecer um nível desejável a ser alcançado; sempre existirá espaço para a melhora contínua. As organizações devem sistematizar ações que possam evidenciar, na p...
ResumoO estado qualitativo dos recursos hídricos é essencial à gestão de águas. Buscou-se avaliar a qualidade da água do Rio Tega, em 6 pontos no curso principal, sendo os pontos(A1) localizados em região densamente urbanizada e industrializada e os pontos (A2) a jusante desta região. A coleta ocorreu no período de setembro de 2012 a junho de 2013. Analisou-se os parâmetros de OD, condutividade, ST,DQO,DBO, nitrogênio amoniacal, fósforo total, fenol, cobre, cromo, níquel e zinco. Os resultados indicaram que os pontos localizados na zona urbana, apresentaram uma pior qualidade comparada aos dois pontos à jusante. Nestes pontos (A1), foram observados baixos teores de OD e as maiores concentrações dos demais parâmetros. Nos pontos de jusante, observou-se uma redução nas concentrações dos parâmetros analisados e aumento do OD. Os resultados indicam variação na qualidade da água em função do descarte de efluentes domésticos, indicado pelas concentrações de NH3, PT, DQO e DBO, bem como de efluentes industriais, caracterizado pela presença de metais e fenol. Existe uma tendência de melhora na qualidade da água nos pontos mais afastados da área urbana (A2), demonstrado pelo aumento do OD e redução dos demais parâmetros indicando capacidade de autodepuração do recurso hídrico.
ResumoA degradação do solo sob exploração agrícola no mundo, especialmente nos países tropicais em desenvolvimento, despertou, nas últimas décadas, a preocupação com a qualidade do solo. Essa degradação ameaça a fertilidade das terras e a qualidade das águas. As áreas degradadas e erosões necessitam de obras de drenagem, geotécnia, terraplenagem e revestimento vegetal para garantir o sucesso dos trabalhos e melhoria do aspecto visual. Assim, este estudo de caso foi realizado numa área degradada situada na várzea do Alto Iguaçu, em Araucária, PR, envolvendo o plantio de cinco espécies florestais nativas da região, com acompanhamento diário, onde objetivou-se apresentar os resultados da taxa de sobrevivência após um mês do plantio. A sobrevivência geral das espécies foi de 80,09%, considerado bom. As espécies Açoita-cavalo (Luehea divaricata), Araçá-vermelho (Psidium cattleianum), Aroeira (Schinus terebinthifolius) e Pitangueira (Eugenia uniflora) apresentaram desempenho bom quanto a taxa de sobrevivência. A espécie da Bracatinga (Mimosa scabrella) apresentou características insatisfatórias de sobrevivência. Recomenda-se realizar experimento com a análise do solo e a preparação do terreno, o plantio em consórcio de leguminosas e gramíneas. Sugere-se a busca por maiores informações sobre as emissões de poluentes atmosféricos ao grande número de industriais que situam-se ao entorno desta área. IntroduçãoO meio ambiente pode ser visto como um grande sistema, composto por sub-sistemas naturais e sub-sistemas sócio-econômicos, engajados em trocas constantes de matéria e energia. Todo ambiente natural terrestre, aquático ou de transição, com características próprias, como florestas, banhados, lagos, praias ou restingas, costões, manguezais etc... -possui elos mais fracos, ou elementos e processos de maior vulnerabilidade, que podem gerar mudanças de grandes proporções quando submetidos a esforços externos determinados. Uma drenagem excessiva, provocada pela ação humana, seja por compactação do solo pela pecuária, por lavouras mecanizadas ou obras de drenagem mal conduzidas, por exemplo, pode modificar de tal forma a natureza e a umidade do solo, que somente espécies vegetais mais resistentes a seca sobrevivem, mudando assim a própria natureza do solo original. Há portanto, casos em que um esforço externo mínimo pode desencadear alterações significativas num ecossistema, desde que aplicado ao elemento ou processo crítico, elo mais fraco ou vulnerável do ecossistema em tela, conforme EIA/REPAR (2005).A rápida degradação do solo sob exploração agrícola no mundo, especialmente nos países tropicais em desenvolvimento, despertou, nas últimas décadas, a preocupação com a qualidade do solo, segundo Lal & Pirce (1991). Desde então, vários conceitos de qualidade do solo foram propostos; o melhor deles porém, define a qualidade do solo como sendo a sua capacidade em manter a produtividade biológica, a qualidade ambiental e a vida vegetal e animal saudável na face da terra, conforme Doran & Parkin (1994).Essa degradação ameaça a fe...
ResumoA degradação do solo sob exploração agrícola no mundo, especialmente nos países tropicais em desenvolvimento, despertou, nas últimas décadas, a preocupação com a qualidade do solo. Essa degradação ameaça a fertilidade das terras e a qualidade das águas. As áreas degradadas e erosões necessitam de obras de drenagem, geotécnia, terraplenagem e revestimento vegetal para garantir o sucesso dos trabalhos e melhoria do aspecto visual. Assim, este estudo de caso foi realizado numa área degradada situada na várzea do Alto Iguaçu, em Araucária, PR, envolvendo o plantio de cinco espécies florestais nativas da região, com acompanhamento diário, onde objetivou-se apresentar os resultados da taxa de sobrevivência após um mês do plantio. A sobrevivência geral das espécies foi de 80,09%, considerado bom. As espécies Açoita-cavalo (Luehea divaricata), Araçá-vermelho (Psidium cattleianum), Aroeira (Schinus terebinthifolius) e Pitangueira (Eugenia uniflora) apresentaram desempenho bom quanto a taxa de sobrevivência. A espécie da Bracatinga (Mimosa scabrella) apresentou características insatisfatórias de sobrevivência. Recomenda-se realizar experimento com a análise do solo e a preparação do terreno, o plantio em consórcio de leguminosas e gramíneas. Sugere-se a busca por maiores informações sobre as emissões de poluentes atmosféricos ao grande número de industriais que situam-se ao entorno desta área. IntroduçãoO meio ambiente pode ser visto como um grande sistema, composto por sub-sistemas naturais e sub-sistemas sócio-econômicos, engajados em trocas constantes de matéria e energia. Todo ambiente natural terrestre, aquático ou de transição, com características próprias, como florestas, banhados, lagos, praias ou restingas, costões, manguezais etc... -possui elos mais fracos, ou elementos e processos de maior vulnerabilidade, que podem gerar mudanças de grandes proporções quando submetidos a esforços externos determinados. Uma drenagem excessiva, provocada pela ação humana, seja por compactação do solo pela pecuária, por lavouras mecanizadas ou obras de drenagem mal conduzidas, por exemplo, pode modificar de tal forma a natureza e a umidade do solo, que somente espécies vegetais mais resistentes a seca sobrevivem, mudando assim a própria natureza do solo original. Há portanto, casos em que um esforço externo mínimo pode desencadear alterações significativas num ecossistema, desde que aplicado ao elemento ou processo crítico, elo mais fraco ou vulnerável do ecossistema em tela, conforme EIA/REPAR (2005).A rápida degradação do solo sob exploração agrícola no mundo, especialmente nos países tropicais em desenvolvimento, despertou, nas últimas décadas, a preocupação com a qualidade do solo, segundo Lal & Pirce (1991). Desde então, vários conceitos de qualidade do solo foram propostos; o melhor deles porém, define a qualidade do solo como sendo a sua capacidade em manter a produtividade biológica, a qualidade ambiental e a vida vegetal e animal saudável na face da terra, conforme Doran & Parkin (1994).Essa degradação ameaça a fe...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.