A 2-D numerical wave tank (NWT) was applied for solving the interaction between a solitary wave and a moving circular cylinder. The cylinder was placed at various positions from the tank bed floor. The cylinder can move at a constant horizontal velocity towards the solitary wave. The collision between a solitary wave and a moving cylinder is investigated at various conditions. A total of fifteen cases were studied. Ten different numerical simulations were used, including five submergence depths and two different moving velocities. The other five different numerical simulations were studied when the cylinder was unmoved in the NWT for comparing wave-structure interaction results between the moving and unmoved cylinders. The numerical results were obtained by calculating Reynolds-Averaged Navier-Stokes (RANS) equations and the volume of fluid (VOF) equations. Two different codes (User-Define-Function-UDF) were used for the generation of a solitary wave by moving a wave paddle and traveling cylinder in the NWT. The dynamic mesh method was applied for recreating mesh. First, the ability of CFD codes to generate a solitary wave by using wave paddle movement and the hydrodynamic forces of a moving cylinder were validated by numerical results. Further, the free-surface elevation and hydrodynamic forces were considered at various conditions. The numerical results show that moving cylinder velocity and the space between the cylinder and the tank bed floor have significant effects on surface displacement and hydrodynamic forces.
A three-dimensional T-shaped flexible beam deformation was investigated using model experiments and numerical simulations. In the experiment, a beam was placed in a recirculating water channel with a steady uniform flow in the inlet. A high-speed camera system (HSC) was utilized to record the T-shaped flexible beam deformation in the cross-flow direction. In addition, a two-way fluid-structure interaction (FSI) numerical method was employed to simulate the deformation of the T-shaped flexible beam. A system coupling was used for conjoining the fluid and solid domain. The dynamic mesh method was used for recreating the mesh. After the validation of the three-dimensional numerical T-shaped flexible solid beam with the HSC results, deformation and stress were calculated for different Reynolds numbers. This study exhibited that the deformation of the T-shaped flexible beam increases by nearly 90% when the velocity is changed from 0.25 to 0.35 m/s, whereas deformation of the T-shaped flexible beam decreases by nearly 63% when the velocity is varied from 0.25 to 0.15 m/s.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.