The potential therapeutic applications of mesenchymal stem/stromal cells (MSCs) and biomaterials have attracted a great amount of interest in the field of biomedical engineering. MSCs are multipotent adult stem cells characterized as cells with specific features, e.g., high differentiation potential, low immunogenicity, immunomodulatory properties, and efficient in vitro expansion ability. Human umbilical cord Wharton’s jelly-derived MSCs (hUC-MSCs) are a new, important cell type that may be used for therapeutic purposes, i.e., for autologous and allogeneic transplantations. To improve the therapeutic efficiency of hUC-MSCs, novel biomaterials have been considered for use as scaffolds dedicated to the propagation and differentiation of these cells. Nowadays, some of the most promising materials for tissue engineering include graphene and its derivatives such as graphene oxide (GO) and reduced graphene oxide (rGO). Due to their physicochemical properties, they can be easily modified with biomolecules, which enable their interaction with different types of cells, including MSCs. In this study, we demonstrate the impact of graphene-based substrates (GO, rGO) on the biological properties of hUC-MSCs. The size of the GO flakes and the reduction level of GO have been considered as important factors determining the most favorable surface for hUC-MSCs growth. The obtained results revealed that GO and rGO are suitable scaffolds for hUC-MSCs. hUC-MSCs cultured on: (i) a thin layer of GO and (ii) an rGO surface with a low reduction level demonstrated a viability and proliferation rate comparable to those estimated under standard culture conditions. Interestingly, cell culture on a highly reduced GO substrate resulted in a decreased hUC-MSCs proliferation rate and induced cell apoptosis. Moreover, our analysis demonstrated that hUC-MSCs cultured on all the tested GO and rGO scaffolds showed no alterations of their typical mesenchymal phenotype, regardless of the reduction level and size of the GO flakes. Thus, GO scaffolds and rGO scaffolds with a low reduction level exhibit potential applicability as novel, safe, and biocompatible materials for utilization in regenerative medicine.
Cerium-doped yttrium aluminum garnet can be used in white light emitting diodes and lasers. The YAG powders are traditionally formed by the solid state method, but the product particles are large, irregular, and non-homogeneous, which is detrimental for its luminescence properties. We present here a simple and fast method for synthesizing YAG:Ce 3þ nanopowder based on solution combustion synthesis from metal nitrates (Ce content between 0.7 and 35 wt%) and fuel (urea, starch, or glucose) water mixtures. The calcination of the raw product at 900 8C for 2 h yielded crystalline garnet nanopowder with grain size well below 100 nm. The properties of the final product were characterized by XRD, SEM, ATR, TG/DTA, and spectrofluorimetric measurements.
Design and experiment of polymeric nanocomposites (NCs) for photovoltaic applications with outstanding electrical and thermal properties has been investigated with the introduction of SiC nanofibers (NFs) into the poly(trimethylene terephthalate)-blockpoly(tetramethylene oxide) (PTT-PTMO) copolymers. In order to enhance the electrical and thermal conductivity, different concentrations of SiC NFs, ranging from 0.1 to 3.0 wt %, have 2 been selected to mix with PTT-PTMO via in situ polymerization method. This reaction method is an excellent choice for incorporation of high amount of SiC NFs (3 wt %) into the polymer that was confirmed by morphological studies. From dielectric spectroscopy studies a percolating behavior was confirmed at low percolation threshold (less than 2% wt %). Furthermore, the 15 % increment for thermal conductivity appeared with combination of 0.5 wt % SiC NFs with PTT-PTMO copolymers, which can be affected by manufacturing process of NCs, state of nanofillers dispersion and aspect ratio of nanofillers.
In this article, the effect of the addition of graphene oxide (GO) and reduced graphene oxide (rGO) on the mechanical properties, thermal stability, and electrical conductivity of polyvinyl alcohol (PVA) has been investigated. Different weight percentages of nanofillers ranging from 0.5 to 5 wt% have been combined with PVA. The ultrasonic technique has been applied to disperse nanofillers in the PVA solution. The nanocomposite films have been prepared via solution casting technique and the dispersion of nanofillers into the PVA has been studied through optical microscopy. The microstructure, crystallization behavior, and interfacial interaction were characterized through X‐ray diffraction and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) and thermogravimetric analysis have been applied to study the thermal properties of the prepared nanocomposites. The DSC results revealed that the crystallization temperature and melting temperature were enhanced in the presence of GO nanofiller. Besides, the tensile strength at break was improved along with the addition of GO; however, elongation at break for PVA/GO and PVA/rGO was diminished. Moreover, all specimens showed insulating behavior and the only sample was electrically conducting, which contain a high amount of rGO (5 wt%).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.