No abstract

No abstract

A liquid precipitation method was used to prepare zinc oxide nanoparticles in three diverse media: water, methanol, and ethylene glycol. The studied materials were examined by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and ultraviolet-visible spectroscopy. X-ray diffraction patterns showed a hexagonal Wurtzite structure of zinc oxide with a nanocrystalline size. Acquired powders showed different morphologies (rod, star, and spherical structures), which were affected by the nature of the solvent in the reaction. The different zinc oxide powders have varied optical band gaps. Scanning electron microscopy examinations confirmed the arrangement of nano-zinc oxide on the surfaces of the materials. The zinc oxide-covering procedure was carried out on cotton, polyester, and 50/50 wt% polyester/cotton blended fabrics using a simple dip and curing system. The cotton fabric treated with nanorod zinc oxide exhibited the highest ultraviolet protection factor with a value of 247.2. The antimicrobial properties of untreated and treated fabrics with nano-zinc oxide were measured against Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcus aureus), and diploid fungus (Candida albicans). The results showed the antimicrobial action relies on the morphological structure and the particle size of zinc oxide and that it increases with a reduced particle size. The cotton fabric treated with 26 nm nonspherical zinc oxide particles showed the highest antimicrobial efficiency with values of 91.4%, 86.8%, and 84.7% for Staphylococcus aureus, Escherichia coli, and Candida albicans, respectively. The mechanical properties of treated fabrics were studied. The results confirm that nano-zinc oxide is highly useful for improving the performance of defense textile products because of its biocompatibility, environmental friendliness, and nontoxicity.

No abstract

Nanoparticle materials have received increasing attention in the functional modification of textiles. In this work, pure TiO2, Ag-doped TiO2, Fe-doped TiO2, and graphene oxide nanoparticles were used to impart the anti-bacterial and adsorptive properties of nanoparticles to cotton fabric. The treated fabric materials were investigated by X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The obtained treated fabrics were used as adsorbents for the removal of methylene blue from aqueous solution. The functionalized cotton fabrics were tested for their anti-microbial capability against Escherichia coli, Bacillus cereus, and Candida albicans. All the functionalized fabrics have higher anti-microbial activity compared to untreated cotton, especially the fabrics containing silver and Fe-doped TiO2. The optimum conditions of the adsorption process are determined via the study of the effect of the initial concentration of dye, pH, and contact time on the removal efficiency. Langmuir, Freundlich, and Temkin isotherms are applied for the equilibrium adsorption data. GO-Cot and Ag-Ti@GO-Cot samples showed the highest adsorption removal activity. The linear correlation coefficient ( R2) showed that the Temkin model well fitted the data of adsorption in the GO-Cot sample. The analysis of experimental data with different kinetic models showed that the pseudo-second-order kinetic model well fitted the adsorption data better than the other kinetic models of the pseudo-first-order, Elovich, and intra-particle diffusion.