The dynamic mechanical behaviors of the [Formula: see text] fiber-reinforced composite laminates subjected to double-position low-velocity impacts are investigated by finite element method. Two impact positions symmetrical about the center of the laminates are impacted sequentially with three impact distances (10 mm, 20 mm, and 40 mm) under three impact energies (5 J, 10 J, and 20 J) to study the interference effect of impact damage. For comparison, plastic damage model (PDM) and elastic damage model (EDM) are established to describe the intra-laminar constitutive, respectively. Compared with available experimental data, the mechanical responses calculated by PDM are more accurate, especially at high energies. Affected by the impact interference, the oscillation of force-time curve for the second impact rather than the first impact is relatively weaker, while the severity of impact damage is reversed. The results show that the maximum displacement is more suitable for characterizing the degree of damage interference than bending stiffness, peak force, and energy dissipation.

Low-velocity impact (LVI) damage of 3D woven composites were experimentally and numerically investigated, considering different off-axis angles and impact energies. The impact responses were examined by LVI tests, and the damage morphology inside the composites was observed by X-ray micro-computed tomography (μ-CT). Yarn-level damage evolution was revealed by developing a hybrid finite element analysis model. The results show that the impact damage has significant directionality determined by the weft/warp orientation of the composites. The damage originates at the bottom of the impacted area and then expands outwards and upwards simultaneously, accompanied by in-plane and out-of-plane stress transfers. The straight-line distributed weft/warp yarns play an important role in bearing loads at the beginning of loading, while the w-shape distributed binder warp yarns gradually absorb impact deformation and toughen the whole structure as the loading proceeds. The effect of directional impact damage on post-impact performance was explored by performing compressing-after-impact (CAI) tests. It is revealed that the CAI properties along principal directions are more sensitive to the low-velocity impact, and the damage mode is significantly affected by the loading direction.

The low-velocity impact behavior of carbon-epoxy cross-ply composites was numerically investigated, examining the effect of impact angle. A plastic continuum damage model, introducing the cohesive interface to describe delamination damage, was established and was validated by available experimental data. Impact histories, progressive deformation, stress transfer, and impact damage are respectively discussed. The results show that an increase in impact angle intensifies the action of tangential force, and gradually transfers energy absorption from normal plastic deformation to tangential deformation and friction, which dissipates more energy through relatively longer contact duration and larger impactor displacement. The delamination damage to upper layers is more affected by tangential loads, intensifying with the increase of the impact angle, and the damage area to the top interface is increased by 132.1% from 0° impact to 60° impact. Meanwhile, the delamination damage to lower layers is mainly determined by normal loads, weakening with the increasing impact angle overall, and the damage area of the lowest interface decreases by 36.6% from 0° impact to 60° impact.

The mechanical response and damage accumulation of carbon-fiber-reinforced composite laminates subjected to repeated low-velocity impacts were experimentally investigated. The repeated impact tests were conducted on [902/−452/02/452]S quasi-isotropic and [902/02]2S cross-ply composite laminates under 16.8 J impact energy, respectively. For each impact, impact responses such as force-time, force-displacement and energy-time curves were recorded. The trends of peak force, maximum central displacement, energy absorption rate and bending stiffness with the increasing impact number were summarized, and the maximum number of repeated impacts corresponded to the occurrence of penetration events. The results showed that the delamination initiation, fiber breakage and penetration were the three typical characteristics describing the damage evolution of the repeated impacts. The damage accumulation of both the laminates was characterized by employing appropriate damage indices. By contrast, the quasi-isotropic laminates had higher impact resistance and damage tolerance, and their damage accumulation was relatively slower.

No abstract