No abstract

No abstract

No abstract

No abstract

No abstract

The aim of this study is to optimise the stainless steel oxidation behaviours during hot rolling. The high temperature oxidation behaviours of ferritic stainless steels B443NT and B445J1M were studied over the temperature range from 1000 to 1150 °C in a humid atmosphere containing 18% water vapour, as measured by a thermogravimetric analyser (TGA). The results indicate that breakaway oxidation occurs at 1090 °C for the B443NT steel, which is 60 °C lower than that for the B445J1M steel. The occurrence of iron oxide nodules on the steels marks the onset of breakaway oxidation; however, the breakaway oxidation phenomenon of B445J1M is different from that of B443NT due to a compact and continuous Mn-Cr spinel which is formed on the surface of B445J1M. The oxide nodules with regenerated Cr2O3 scale underneath the Fe-Cr spinel display better adhesion without showing pores at the metal-scale interface.

No abstract

The breakaway oxidation behaviour of ferritic stainless steels 430, 443 and 445 has been investigatedat 1150•C in humid air. The oxidation kinetics exhibited significant differences among the three ferriticstainless steels. A uniform and steady growing oxide scale was developed on the 430 steel with an evensteel/oxide interface. Local breakdown of the initially protective oxide scale occurred and oxide noduleswere developed on the 443 and 445 stainless steels, resulting in irregular and rough steel/oxide interfaces. The breakaway oxidation behaviour was significantly influenced by the microstructure and thecomposition of the oxide scale. The Mn-Cr spinel oxide formed on top of the Cr2O3scale in Mo alloying445 steel can greatly minimise the Cr depletion.