Porous crystals are strategic materials with industrial applications within petrochemistry, catalysis, gas storage, and selective separation. Their unique properties are based on the molecular-scale porous character. However, a principal limitation of zeolites and similar oxide-based materials is the relatively small size of the pores, typically in the range of medium-sized molecules, limiting their use in pharmaceutical and fine chemical applications. Metal organic frameworks (MOFs) provided a breakthrough in this respect. New MOFs appear at a high and an increasing pace, but the appearances of new, stable inorganic building bricks are rare. Here we present a new zirconium-based inorganic building brick that allows the synthesis of very high surface area MOFs with unprecedented stability. The high stability is based on the combination of strong Zr-O bonds and the ability of the inner Zr6-cluster to rearrange reversibly upon removal or addition of mu3-OH groups, without any changes in the connecting carboxylates. The weak thermal, chemical, and mechanical stability of most MOFs is probably the most important property that limits their use in large scale industrial applications. The Zr-MOFs presented in this work have the toughness needed for industrial applications; decomposition temperature above 500 degrees C and resistance to most chemicals, and they remain crystalline even after exposure to 10 tons/cm2 of external pressure.

Through a combined use of experimental and theoretical approaches such as XRPD, EXAFS, IR, and UV−vis spectroscopies and ab initio periodic DFT calculations, we report a detailed characterization of structural, vibrational, and electronic properties of UiO-66 (Zr-BDC MOF) in its hydroxylated and dehydroxylated forms. The stability of the materials with respect to the most common solvents, acids, and bases is determined by combining XRPD and TGA/MS techniques. The structures of the two forms of UiO-66 are refined through an interactive XRPD/EXAFS approach and validated by ab initio calculations. Experimental and calculated IR spectra are reported and compared to enlighten the nature of vibrational modes upon dehydroxylation and to show the complete reversibility of the dehydration/hydration phenomenon. Experimental and calculated band gaps are also reported and compared. In this work, we show the necessity to combine, in a synergic way, different experimental techniques and periodic ab initio approaches to disclose and fully understand the nature of complex novel materials such as UiO-66 on structural, vibrational, and electronic grounds. The correct structure refinement could not be possible using one of these three approaches alone, in particular, XRPD data were unable to detect an important distortion of the Zr6O6 units of the dehydrated material that was, however, foreseen in the ab initio calculations and measured in the EXAFS spectra.

Liquid hydrocarbon fuels play an essential part in the global energy chain, owing to their high energy density and easy transportability. Olefins play a similar role in the production of consumer goods. In a post-oil society, fuel and olefin production will rely on alternative carbon sources, such as biomass, coal, natural gas, and CO(2). The methanol-to-hydrocarbons (MTH) process is a key step in such routes, and can be tuned into production of gasoline-rich (methanol to gasoline; MTG) or olefin-rich (methanol to olefins; MTO) product mixtures by proper choice of catalyst and reaction conditions. This Review presents several commercial MTH projects that have recently been realized, and also fundamental research into the synthesis of microporous materials for the targeted variation of selectivity and lifetime of the catalysts.

Presented in this paper is a deep investigation into the defect chemistry of UiO-66 when synthesized in the presence of monocarboxylic acid modulators under the most commonly employed conditions. We unequivocally demonstrate that missing cluster defects are the predominant defect and that their concentration (and thus the porosity and composition of the material) can be tuned to a remarkable extent by altering the concentration and/or acidity of the modulator. Finally, we attempt to rationalize these observations by speculating on the underlying solution chemistry.

The development in the field MOF materials is moving from the discovery of new structures toward applications of the most promising materials. In most cases, specialized applications require incorporation of functional chemical groups. This work is a systematic investigation of the effect that simple substituents attached to the aromatic linker have on the stability and property to the parent MOF. A family of isoreticular MOFs, based on the UiO-66 structure was obtained from the three different linker ligands H2N−H2BDC, O2N−H2BDC, and Br−H2BDC. The physicochemical and chemical investigation of these materials demonstrate that this class of MOFs retains high thermal and chemical stabilities, even with functional groups present at the linker units. The results demonstrate the possibility of incorporating active functional groups into the UiO-66 structure almost without losing its exceptionally high thermal and chemical stability. It has been established that the functional groups, at least in the amino functionalized UiO-66 sample, are chemically available as evidenced by the H/D exchange experiment, making the tagged UiO series MOFs very interesting for further studies within the field of catalysis.

No abstract

The widely debated reaction mechanism for the conversion of methanol to hydrocarbons over acidic zeolite H-ZSM-5 has been investigated using isotopic labeling. The mechanistic findings for H-ZSM-5 are clearly different from those previously described at a detailed level for H-beta and H-SAPO-34 catalysts. On the basis of the current set of data, we can state that, for H-ZSM-5, ethene appears to be formed exclusively from the xylenes and trimethylbenzenes. Moreover, propene and higher alkenes are to a significant extent formed from alkene methylations and interconversions. This implies that ethene formation is mechanistically separated from the formation of higher alkenes, an insight of utmost importance for understanding and possibly controlling the ethene/propene selectivity in methanol-to-alkenes catalysis.

Cu-exchanged zeolites possess active sites that are able to cleave the C-H bond of methane at temperatures ≤200 °C, enabling its selective partial oxidation to methanol. Herein we explore this process over Cu-SSZ-13 materials. We combine activity tests and X-ray absorption spectroscopy (XAS) to thoroughly investigate the influence of reaction parameters and material elemental composition on the productivity and Cu speciation during the key process steps. We find that the Cu moieties responsible for the conversion are formed in the presence of O and that high temperature together with prolonged activation time increases the population of such active sites. We evidence a linear correlation between the reducibility of the materials and their methanol productivity. By optimizing the process conditions and material composition, we are able to reach a methanol productivity as high as 0.2 mol CHOH/mol Cu (125 μmol/g), the highest value reported to date for Cu-SSZ-13. Our results clearly demonstrate that high populations of 2Al ZCu sites in 6r, favored at low values of both Si:Al and Cu:Al ratios, inhibit the material performance by being inactive for the conversion. Z[CuOH] complexes, although shown to be inactive, are identified as the precursors to the methane-converting active sites. By critical examination of the reported catalytic and spectroscopic evidence, we propose different possible routes for active-site formation.