Global economic development and the associated increase in consumption increase the demand for plastics. The result of these changes is the increase in the share of this group of used plastics in the structure of household waste. An innovative way of managing plastic waste is to use it as a component of a high-energy material. According to the conceptual assumptions, some plastics introduced into the structure of an explosive (Ex) in appropriate amounts can improve the energy parameters of a high-energy material. Modification of the composition of the explosive causes a change in its explosive and operational parameters. It also becomes necessary to develop a method of introducing an additional component. Computer programs for thermodynamic calculations are a tool for modeling the predicted energy parameters of an explosive. The performed simulations and modeling allow for the selection of appropriate compositions for laboratory and “in situ” tests. This reduces the number of field tests performed. This enables the more effective design of new explosive compositions. The use of waste plastics as a corrector of explosive properties may also be pro-environmental in nature through the use of a detonation method of their disposal and will reduce the cost of manufacturing the product. The conducted analyses showed that for three ANFO-type explosives containing 2% polyethylene—PE 2.0, 1% polypropylene—PP 1.0 and 1% polyurethane—PU 1.0, obtained energy parameters similar to ANFO and qualitatively and quantitatively similar structure of post-detonation gases.
STRESZCZENIE: Celem pracy był bezpośredni pomiar temperatury spalania próbek paliw prochowych (propelantów) mogących znaleźć zastosowanie w pracach szczelinowania gazowego gazonośnych pokładów węgla kamiennego. Eksperymenty prowadzono na specjalnie zaprojektowanym strzałowym stanowisku badawczym. Zaproponowany układ pozwalał na wykonanie rejestracji ciśnień podczas spalania próbek paliw inicjowanych za pomocą zapłonników pirotechnicznych. Na podstawie uzyskanych charakterystyk zmian ciśnienia w czasie p(t) wyznaczone zostały podstawowe parametry użytkowe, tj. temperatura gazów prochowych i maksymalne ciśnienie. Testy polegały na zapłonie wyselekcjonowanych paliw wysokoenergetycznych w warunkach zawodnionych oraz na bezpośrednim pomiarze temperatury i ciśnienia spalania. Wykonano dziewięć pozytywnych prób spalania paliwa wysokoenergetycznego o różnej masie. Głównym wyzwaniem w pracy była próba odpowiedzenia na pytanie czy metoda stymulacji przypływu płynu do odwiertu dobrze sprawdzona w otworach ropnych i gazowych może znaleźć zastosowanie w pracach ułatwiających przepływ metanu w formacjach węglowych. Metoda oparta na szczelinowaniu gazowym z wykorzystaniem materiałów wysokoenergetycznych polega na niedetonacyjnym indukowaniu radialnej siatki szczelin w strefie przyotworowej. Zakres badań obejmuje dziewięć testów strzałowych na poligonie doświadczalnym realizowanych z użyciem różnych paliw prochowych spalanych w warunkach zawodnionych -z tzw. przybitką w postaci cieczy. Stalowe modele strzałowe zostały przygotowane tak, aby imitować warunki typowe dla tych, które dominują w stymulowanej warstwie węgla. Wstępne badania przeprowadzone w INiG -PIB wykazują, iż bezpośrednie przełożenie technologii szczelinowania z użyciem propelantów (znanej z przemysłu naftowego) na zabiegi szczelinowania pokładów węgla kamiennego wydaje się być niemożliwe. Adaptacji do warunków fizycznych zalegania węgla kamiennego wymaga przede wszystkim paliwo propelantowe. Głównym problemem postawionym w artykule jest wybór propelantu, którego temperatura spalania nie przekroczy 580°C, przy której następuje samozapłon metanu. Weryfikacja paliw prochowych (propelantów) mogących znaleźć zastosowanie w procesie szczelinowania gazowego złóż niekonwencjonalnych, a zwłaszcza gazonośnych pokładów węgla będzie realizowana na drodze badań poligonowych z wykorzystaniem komory strzałowej. Słowa kluczowe: szczelinowanie gazowe, paliwa prochowe, testy poligonowe, metan z pokładów węgla.
Ocena dynamiki spalania propelantów w środowisku węgla kamiennego Artykuł opracowano na podstawie wyników badań zrealizowanego projektu szczelinowania gazowego próbek węgla kamiennego z wykorzystaniem materiałów wysokoenergetycznych-propelantów, w skali laboratoryjnej. Założeniem projektu było sprawdzenie, czy metoda stymulacji przepływu mediów ze złoża do odwiertu, znana z zastosowań w przemyśle naftowym przy konwencjonalnych złożach węglowodorów, może zostać wykorzystana w przypadku złóż metanu z pokładów węgla kamiennego (CBM). Metoda szczelinowania gazowego z zastosowaniem materiałów wysokoenergetycznych opiera się na niedetonacyjnym wykonaniu kilku radialnych szczelin w strefie przyotworowej, poprzez oddziaływanie ciśnienia gazów prochowych, powstałych w wyniku inicjacji propelantów. Zakres pracy obejmował serię testów szczelinowania gazowego w warunkach poligonowych na próbkach węgla kamiennego, które zostały zeskanowane tomografem komputerowym, przed i po próbach ciśnieniowych z wykorzystaniem materiałów wysokoenergetycznych. Zabieg szczelinowania wykonano w laboratoryjnym silniku rakietowym (LSR), odpowiednio dostosowanym do badań na próbkach węgli. Uzyskane obrazy spękań poddano analizie porównawczej z obrazami pierwotnej sieci spękań w węglach oraz opisano występujące pomiędzy nimi różnice. Dodatkowo przeanalizowano wykresy ciśnienia w komorze silnika laboratoryjnego, powstałe w trakcie badań.
The stimulation of deposits using high-energetic materials (propellants) may prove to be an effective method of acquiring methane in the coal basins of Poland. The propellants are a type of explosives which during combustion generate huge volumes of combustion gases at high pressure and temperature, and are able to impact rock structure, thus creating migration paths for methane. Until now, in the Department of Shooting Engineering of the Oil and Gas Institute-National Research Institute, a number of gas fracturing tests have been completed in laboratory scale. The experiments confirmed the ability of high-energy materials to influence the structure of hard coal. However, the setup of the laboratory rocket engine used in experiments forced the combustion products of high-energy materials to influence hard coal samples only from the front, which resulted in creating rather channels, and no model fractures in effect of the gas fracturing process. Therefore, we decided to develop an experimental setup, in which combustion products of high-energy materials would impact the rock in various directions, and create model fractures-not channels. The gas fracturing task was completed within the work on five selected coal samples that have been cored from bigger coal blocks, acquired from the KWK Zofiówka coal mine, operating on methane saturated coal beds, located in the Upper-Silesian Coal Basin in Poland. The series of experiments were performed on experimental fireground, managed by the Institute of Industrial Organic Chemistry, Krupski Młyn Branch. 100-gram charges of inhibited MPH propellant (MPH = low-diameter, heterogeneous) were used in the experiments. During the attempts of initiating propellants, pressure in the testing stand was recorded by means of a 100 MPa pressure sensor. In order to determine the secondary fracturing grid, the hard coal samples were scanned using the CT (computer tomography) method prior to and following the tests on the experimental fireground. Next, the original and secondary fracture grid in the samples were reconstructed using specialized computer software. The analysis of the obtained results confirmed that high-energy materials are able to impact hard coal structure, causing the creation of fractures. Furthermore, the research showed that the orientation and original amount of fractures present in rocks have a very high impact on the creation of fractures in hard coal samples.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.