Breaking of structural symmetries of nanomagnetic systems is of great interest for the development of ultralow-power spintronic devices. The structural asymmetry in various magnetic heterostructures has been engineered to reveal novel fundamental interactions between electric currents and magnetization, resulting in spin-orbit-torques (SOTs) on the magnetization [1][2][3][4][5][6] , which are both fundamentally important and technologically promising for device applications. Such SOTs have been used to realize current-induced magnetization switching [2][3][4]7 and domain-wall 3 motion [8][9][10] in recent experiments. Typical heterostructures exhibiting SOTs consist of a ferromagnet (F) with a heavy nonmagnetic metal (NM) having strong spin-orbit coupling on one side, and an insulator (I) on the other side (referred to as NM/F/I structures, shown schematically in Fig. 1a, which break mirror symmetry in the growth direction). In terms of device applications, the use of SOTs in NM/F/I structures allows for a significantly lower write current compared to regular spin-transfer-torque (STT) devices 4 . It can greatly improve energy efficiency and scalability [1][2][3][4][5]11 for new SOT-based devices such as magnetic random access memory (SOT-MRAM), going beyond state-of-the-art STT-MRAM.For practical applications, a critical requirement to achieve high-density SOT memory is the ability to perform SOT-induced switching without the use of external magnetic fields, in particular for perpendicularly-magnetized ferromagnets, which show better scalability and thermal stability as compared to the in-plane case 12 .However, there are currently no practical solutions that meet this requirement. In NM/F/I heterostructures studied so far, the form of the resultant current-induced SOT alone does not allow for deterministic switching of a perpendicular ferromagnet, requiring application of an additional external in-plane magnetic field to switch the perpendicular magnetization [2][3][4] . (This is a very general feature of SOT devices, which can be explained by symmetry-based arguments, as discussed below). In such experiments, the external field allows for each current direction to favor a particular orientation for the out-of-plane component of magnetization, thereby resulting in deterministic perpendicular switching. However, this external field is undesirable 4 from a practical point of view. For device applications, it also reduces the thermal stability of the perpendicular magnet by lowering the zero-current energy barrier between the stable perpendicular states, resulting in a shorter retention time if used for memory.This work provides a solution to eliminate the use of external magnetic fields, bringing SOT-based spintronic devices such as SOT-MRAM closer to practical application. We present a new NM/F/I structure, which provides a novel spin-orbit torque, resulting in zero-field current-induced switching of perpendicular magnetization. Our device consists of a stack of Ta/Co 20 Fe 60 B 20 /TaO x layers, but also has a...

The quest for novel low-dissipation devices is one of the most critical for the future of semiconductor technology and nano-systems. The development of a low-power, universal memory will enable a new paradigm of non-volatile computation. Here we consider STT-RAM as one of the emerging candidates for low-power non-volatile memory. We show different configurations for STT memory and demonstrate strategies to optimize key performance parameters such as switching current and energy. The energy and scaling limits of STT-RAM are discussed, leading us to argue that alternative writing mechanisms may be required to achieve ultralow power dissipation, a necessary condition for direct integration with CMOS at the gate level for non-volatile logic purposes. As an example, we discuss the use of the giant spin Hall effect as a possible alternative to induce magnetization reversal in magnetic tunnel junctions using pure spin currents. Further, we concentrate on magnetoelectric effects, where electric fields are used instead of spin-polarized currents to manipulate the nanomagnets, as another candidate solution to address the challenges of energy efficiency and density. The possibility of an electric-field-controlled magnetoelectric RAM as a promising candidate for ultralow-power non-volatile memory is discussed in the light of experimental data demonstrating voltage-induced switching of the magnetization and reorientation of the magnetic easy axis by electric fields in nanomagnets.

We demonstrate excitation of ferromagnetic resonance in CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) by the combined action of voltage-controlled magnetic anisotropy (VCMA) and spin transfer torque (ST). Our measurements reveal that GHz-frequency VCMA torque and ST in low-resistance MTJs have similar magnitudes, and thus that both torques are equally important for understanding high-frequency voltage-driven magnetization dynamics in MTJs. As an example, we show that VCMA can increase the sensitivity of an MTJ-based microwave signal detector to the sensitivity level of semiconductor Schottky diodes.

We report electric-field-induced switching with write energies down to 6 fJ/bit for switching times of 0.5 ns, in nanoscale perpendicular magnetic tunnel junctions (MTJs) with high resistance-area product and diameters down to 50 nm. The ultra-low switching energy is made possible by a thick MgO barrier that ensures negligible spin-transfer torque contributions, along with a reduction of the Ohmic dissipation. We find that the switching voltage and time are insensitive to the junction diameter for high-resistance MTJs, a result accounted for by a macrospin model of purely voltageinduced switching. The measured performance enables integration with same-size CMOS transistors in compact memory and logic integrated circuits. V

In this work, we report on the demonstration of voltage-driven spin wave excitation, where spin waves are generated by multiferroic magnetoelectric (ME) cell transducers driven by an alternating voltage, rather than an electric current. A multiferroic element consisting of a magnetostrictive Ni film and a piezoelectric [Pb(Mg 1/3 Nb 2/3 )O 3 ] (1Àx) -[PbTiO 3 ] x substrate was used for this purpose. By applying an AC voltage to the piezoelectric, an oscillating electric field is created within the piezoelectric material, which results in an alternating strain-induced magnetic anisotropy in the magnetostrictive Ni layer. The resulting anisotropy-driven magnetization oscillations propagate in the form of spin waves along a 5 lm wide Ni/NiFe waveguide. Control experiments confirm the strain-mediated origin of the spin wave excitation. The voltage-driven spin wave excitation, demonstrated in this work, can potentially be used for low-dissipation spin wave-based logic and memory elements. V C 2014 AIP Publishing LLC. [http://dx.