RESUMOO presente estudo objetivou estimar parâmetros e valores genéticos para os caracteres altura e diâmetro de progênies de seringueira, pelo método de modelos mistos (procedimento REML/BLUP). Progênies de meio-irmãos foram estabelecidas em área do município de Dois Irmãos do Buriti (MS), sob delineamento de blocos ao acaso, com 28 tratamentos (progênies), cinco repetições e dez plantas por parcela. A coleta dos dados foi realizada em março de 2004. Aos 12 meses de idade foram avaliados os caracteres altura e diâmetro. Nas herdabilidades individuais no sentido restrito para altura (0,1877) e diâmetro (0,1809), bem como nas herdabilidades médias no sentido restrito de progênies para altura (0,3385) e diâmetro (0,4124) observaram-se boas magnitudes. Ganhos genéticos preditos na ordem de 14,04% a 16,54% foram obtidos para o caráter altura e 25,76% a 91,78% para o caráter diâmetro. Os resultados estimulam a continuidade do programa de melhoramento genético, com a possibilidade de maximização dos ganhos nas gerações seguintes. Palavras-chave:Hevea brasiliensis, parâmetros genéticos, ganho genético, procedimento REML/BLUP. ABSTRACT GENETIC VARIABILITY AND SELECTION FOR GROWTH TRAITS OF RUBBER TREEThis study aim to estimate genetic values and parameters for height and diameter of rubber tree plants by the methodology of mixed models (REML/BLUP procedure). Half-sib progenies were established set Dois Irmãos do Buriti, Mato Grosso do Sul State in complete randomised block, with 28 treatments, 5 replications and 10 plants per plot. On March, 2004, twelve months after transplanting, plant height and diameter were evaluated. The individual narrow sense heritability for plant height (0.1877) and diameter (0.4124) showed good magnitude. Estimated genetic gains of from 14.04% to 16.54% were obtained for height and 25.76% to 91.78% for diameter indicating the possibility of selection for those traits.
Este trabalho teve como objetivo avaliar diferentes modelos de afilamento na estimativa da altura comercial, do volume comercial e de volumes ao longo do fuste de Eucalyptus sp., de modo a garantir resultados mais precisos na obtenção de multiprodutos. Foram avaliados os modelos de afilamento de Max e Burkhart (1976), Demaerschalk e Kozak (1977) e Parresol et al. (1987). Empregaram-se dados de cubagem rigorosa de árvores de Eucalyptus sp., com idade de 16 anos, sendo utilizadas 41 árvores-amostra no ajuste dos modelos. Baseado na análise gráfica dos resíduos e nas estatísticas desvio médio (dm), média das diferenças (MD) e desvio-padrão das diferenças (DPD), verificou-se que o modelo de Max e Burkhart (1976) foi superior aos outros em todas variáveis avaliadas, seguido pelo modelo de Demaerschalk e Kozak (1967). O modelo de Parresol et al. (1987) teve resultados tendenciosos, à exceção da estimativa de volumes de toras entre 25 e 35% da altura total.
2. Mestrando do Programa de Pós-Graduação/FAMEV/UFMT 3. Professor Doutor do DEF/CCA/UFES 4. Mestrando da UFBA 5. Mestrando da UFBA RESUMOEste experimento foi conduzido no período de julho de 2004 a setembro de 2005 na Depressão Cuiabana, MT. O objetivo foi avaliar a produção e a estrutura do dossel de cinco forrageiras do gênero Brachiaria submetidas às intensidades de corte de 10 e 20 cm. As forrageiras foram irrigadas e receberam três adubações de cobertura. Os cortes foram realizados com intervalos de 30 dias. As variáveis analisadas foram: acúmulo de forragem, altura da planta, densidade de forragem, porcentagem de lâmina foliar, porcentagem de colmo, relação folha-colmo e porcentagem de material senescente. O delineamento adotado foi em blocos ao acaso, no esquema de parcelas subdivididas no tempo. O maior acúmulo de forragem foi do capim-mulato (4,2 t/ha de MS), seguido pelos capins xaraés, decumbens e ruziziensis, com médias superiores a 3,5 t/ha de MS, enquanto a menor produção foi do capim-marandu. As intensidades de corte afetaram as características estruturais independentes das forrageiras, mas o corte a 20 cm propiciou maior porcentagem de folhas para o capim-xaraés (67%). A menor intensidade de corte proporcionou maior produção de forragem, com maior percentual de folhas e menor perda por senescência, ao longo do período experimental. As forrageiras avaliadas apresentam potencial para serem utilizadas nos sistemas de produção intensivos na Depressão Cuiabana, especialmente o capim-mulato e o capim-xaraés.
RESUMO -Avaliou-se a influência das características anatômicas e dos sítios de lignificação dos tecidos sobre o valor nutritivo de lâminas foliares de quatro gramíneas coletadas nas estações chuvosa e seca. Amostras frescas das duas últimas lâminas foliares recém-expandidas, correspondentes à última e à penúltima posição no perfilho de capim-gordura (Melinis minutiflora Pal. De Beauv), capim-braquiária (Brachiaria decumbens Staph.), capim-sapé (Imperata brasiliensis Trin.) e capim-jaraguá (Hyparrhenia rufa (Nees) Staph.) foram avaliadas quanto às características anatômicas, segundo técnicas de microscopia de luz e varredura. Nessas amostras analisou-se a proporção de tecidos e de sítios de lignificação. Também foram determinadas as concentrações de fibra em detergente neutro (FDN), fibra em detergente ácido (FDA), lignina e celulose da parede celular, assim como a digestibilidade in vitro da matéria seca (DIVMS). Os dados foram analisados segundo delineamento inteiramente casualizado, com os tratamentos no esquema fatorial, com três repetições. Determinaram-se as correlações entre DIVMS, componentes químicos da parede celular e proporção de tecidos. Observou-se o mesmo padrão de proporção de tecidos e DIVMS no capim-gordura e no capim-braquiária, assim como nos capins sapé e jaraguá. A digestibilidade in vitro da matéria seca e os componentes da parede celular sofreram influência da estação, enquanto as características anatômicas não foram significativamente influenciadas por esse fator. Os capins gordura e braquiária caracterizaram-se por maiores proporções de bainha parenquimática do feixe e os capins sapé e jaraguá por maiores
Caracterização dendrométrica de plantios de paricá (Schizolobium amazonicum Huber ex. Ducke) na região de Paragominas, PA RESUMO O objetivo deste trabalho foi avaliar as principais características dendrométricas como o diâmetro, a altura e a forma e avaliar modelos para estimar o volume total de árvores de paricá (Schizolobium amazonicum Huber ex. Ducke) em plantios comerciais com idades de cinco, seis e sete anos, em espaçamento 4 x 4 m, na região de Paragominas, PA. A seleção dos modelos tomou como base medidas de qualidade de ajuste, como R 2 , erro padrão das estimativas, bem como a análise gráfica dos resíduos. Em relação às características dendrométricas, os resultados obtidos mostraram que o paricá apresentou medidas dendrométricas semelhantes quando comparado ao eucalipto em condições parecidas. A paricá teve um crescimento tanto em diâmetro quanto em altura semelhante a espécies de rápido crescimento. Quanto às equações de volume total, de modo geral, o modelo de Schumacher & Hall apresentou estimativas mais precisas na estimação do volume das árvores. Palavras-chave: Biometria florestal, crescimento, volume.Dendrometric characterization in paricá plantations (Schizolobium amazonicum Huber ex. Ducke) in the region of Paragominas, Pará, Brazil ABSTRACT The aim of this study was to evaluate the main dendrometric characteristics of paricá (Schizolobium amazonicum Huber ex. Ducke), such as diameter, height and form, and also test models to estimate the total volume of paricá trees in commercial plantations with five, six and seven years of age, in a 4 m x 4 m spacing, in the region of Paragominas, Pará, Brazil. The models selection was based on goodness-of-fit indicators, such as R 2 , standard error of estimates, as well as the residual graphical analysis. Regarding the dendrometrical characteristics, results showed that the paricá trees presented similar dendrometrical measures when compared to eucalyptus in similar conditions. The paricá had a similar growth in both diameter and height to fast-growth species. As for the equations of total volume, generally, Schumacher & Hall's model showed the best results to estimate the individual tree volume.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.