Polymeric nanomaterials emerge as key building blocks for engineering materials in a variety of applications. In particular, the high modulus polymeric nanofibers are suitable to prepare flexible yet strong membrane separators to prevent the growth and penetration of lithium dendrites for safe and reliable high energy lithium metal-based batteries. High ionic conductance, scalability, and low cost are other required attributes of the separator important for practical implementations. Available materials so far are difficult to comply with such stringent criteria. Here, we demonstrate a high-yield exfoliation of ultrastrong poly(p-phenylene benzobisoxazole) nanofibers from the Zylon microfibers. A highly scalable blade casting process is used to assemble these nanofibers into nanoporous membranes. These membranes possess ultimate strengths of 525 MPa, Young's moduli of 20 GPa, thermal stability up to 600 °C, and impressively low ionic resistance, enabling their use as dendrite-suppressing membrane separators in electrochemical cells. With such high-performance separators, reliable lithium-metal based batteries operated at 150 °C are also demonstrated. Those polyoxyzole nanofibers would enrich the existing library of strong nanomaterials and serve as a promising material for large-scale and cost-effective safe energy storage.

Ba deficiency is used to tune the electronic, oxygen-ion and proton conduction in BaCo0.4Fe0.4Zr0.1Y0.1O3−δ perovskite for a high-activity cathode of PCFCs.

No abstract

Mixed oxygen ionic and electronic conduction is a vital function for cathode materials of solid oxide fuel cells (SOFCs), ensuring high efficiency and low-temperature operation. However, Fe-based layered double perovskites, as a classical family of mixed oxygen ionic and electronic conducting (MIEC) oxides, are generally inactive toward the oxygen reduction reaction due to their intrinsic low electronic and oxygen-ion conductivity. Herein, Zn doping is presented as a novel pathway to improve the electrochemical performance of Fe-based layered double perovskite oxides in SOFC applications. The results demonstrate that the incorporation of Zn ions at Fe sites of the PrBaFe2O5+δ (PBF) lattice simultaneously regulates the concentration of holes and oxygen vacancies. Consequently, the oxygen surface exchange coefficient and oxygen-ion bulk diffusion coefficient of Zn-doped PBF are significantly tuned. The enhanced mixed oxygen ionic and electronic conduction is further confirmed by a lower polarization resistance of 0.0615 and 0.231 Ω·cm2 for PrBaFe1.9Zn0.1O5+δ (PBFZ0.1) and PBF, respectively, which is measured using symmetric cells at 750 °C. Moreover, the PBFZ0.1-based single cell demonstrates the highest output performance among the reported Fe-based layered double perovskite cathodes, rendering a peak power density of 1.06 W·cm–2 at 750 °C and outstanding stability over 240 h at 700 °C. The current work provides a highly effective strategy for designing cathode materials for next-generation SOFCs.

Protonic ceramic fuel cells (PCFCs) are receiving increasing attention because of their high energy conversion efficiency. However, traditional mixed oxygen-ionic and electronic conductors (MOECs) show sluggish oxygen reduction kinetics when used in PCFCs because of their intrinsic low protonic conductivity. Herein, it is reported that cooperatively regulating the concentration and basicity of oxygen vacancies can result in fast proton transport in MOECs, which is demonstrated in a Zr 4+ -doped Sr 2 Fe 1.5 Mo 0.5 O 6−δ (SFMZ) perovskite. The so-obtained SFMZ perovskite renders plentiful oxygen vacancies and strong hydration ability, which can boost the formation of protonic defects. Furthermore, the chemical diffusion coefficient of protons (D H,chem ) is established first to determine the proton mobility of the cathode. The results indicate that SFMZ exhibits improved proton diffusion kinetics with a D H,chem value of 8.71 × 10 −7 cm 2 s −1 at 700 °C, comparable to the diffusion coefficient of the commonly used protonic electrolyte BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ of 1.84 × 10 −6 cm 2 s −1 . A low polarization resistance of 0.169 Ω cm 2 and a peak power density as high as 0.79 W cm −2 were achieved at 700 °C with the SFMZ cathode. Such excellent performance suggests that rationally tailoring the oxygen vacancy is a feasible strategy to promote proton diffusion in perovskite-structured electrode materials as efficient PCFC cathodes.

No abstract

No abstract

A three-dimensional (3D) graphene–Co3O4 electrode was prepared by a two-step method and this binder-free monolithic electrode exhibited enhanced performance for rechargeable Li–O2 batteries.