The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, also called the Guo Shou Jing Telescope) is a special reflecting Schmidt telescope. LAMOST's special design allows both a large aperture (effective aperture of 3.6 m-4.9 m) and a wide field of view (FOV) (5 • ). It has an innovative active reflecting Schmidt configuration which continuously changes the mirror's surface that adjusts during the observation process and combines thin deformable mirror active optics with segmented active optics. Its primary mirror (6.67 m×6.05 m) and active Schmidt mirror (5.74 m×4.40 m) are both segmented, and composed of 37 and 24 hexagonal sub-mirrors respectively. By using a parallel controllable fiber positioning technique, the focal surface of 1.75 m in diameter can accommodate 4000 optical fibers. Also, LAMOST has 16 spectrographs with 32 CCD cameras. LAMOST will be the telescope with the highest rate of spectral acquisition. As a national large scientific project, the LAMOST project was formally proposed in 1996, and approved by the Chinese government in 1997. The construction started in 2001, was completed in 2008 and passed the official acceptance in June 2009. The LAMOST pilot survey was started in October 2011 and the spectroscopic survey will launch in September 2012. Up to now, LAMOST has released more than 480 000 spectra of objects. LAMOST will make an important contribution to the study of the large-scale structure of the Universe, structure and evolution of the Galaxy, and cross-identification of multiwaveband properties in celestial objects.

The Large sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) general survey is a spectroscopic survey that will eventually cover approximately half of the celestial sphere and collect 10 million spectra of stars, galaxies and QSOs. Objects in both the pilot survey and the first year regular survey are included in the LAMOST DR1. The pilot survey started in October 2011 and ended in June 2012, and the data have been released to the public as the LAMOST Pilot Data Release in August 2012. The regular survey started in September 2012, and completed its first year of operation in June 2013. The LAMOST DR1 includes a total of 1202 plates containing 2 955 336 spectra, of which 1 790 879 spectra have observed signalto-noise ratio (SNR) ≥ 10. All data with SNR ≥ 2 are formally released as LAMOST DR1 under the LAMOST data policy. This data release contains a total of 2 204 696 spectra, of which 1 944 329 are stellar spectra, 12 082 are galaxy spectra and 5017 are quasars. The DR1 not only includes spectra, but also three stellar catalogs with measured parameters: late A,FGK-type stars with high quality spectra (1 061 918 entries), A-type stars (100 073 entries), and M-type stars (121 522 entries). This paper introduces the survey design, the observational and instrumental limitations, data reduction and analysis, and some caveats. A description of the FITS structure of spectral files and parameter catalogs is also provided.

Botanical systems have evolved the intriguing ability to respond to diverse stimuli due to long‐term survival competition. Mimicking these dynamic behaviors has greatly advanced the developments in wide fields ranging from soft robotics, precision sensors to drug delivery and biomedical devices. However, realization of stimuli‐responsive components at the microscale with high response speed still remains a significant challenge. Herein, the miniature biomimetic 4D printing of pH‐responsive hydrogel is reported in spatiotemporal domain by femtosecond laser direct writing. The dimension of the printed architectures is at the microscale (<102 µm) and the response speed is reduced down to subsecond level (<500 ms). Shape transformation with multiple degrees of freedom is accomplished by taking advantage of pH‐triggered expansion, contraction, and torsion. Biomimetic complex shape‐morphing is enabled by adopting flexible scanning strategies. In addition, application of this 4D‐printed micro‐architecture in selective micro‐object trapping and releasing is demonstrated, showcasing its possibilities in micromanipulation, single‐cell analysis, and drug delivery.

Smart dynamic regulation structured surfaces, inspired by nature, which can dynamically change their surface topographies under external stimuli for convertible fluidic and optical properties, have recently motivated significant interest for scientific research and industrial applications. However, there is still high demand for the development of multifunctional dynamically transformable surfaces using facile preparation strategies. In this work, a type of Janus high‐aspect‐ratio magnetically responsive microplates array (HAR‐MMA) is readily fabricated by integrating a flexible laser scanning strategy, smart shape‐memory‐polymer‐based soft transfer, and a simple surface treatment. By applying external magnetic field, instantaneous and reversible deformation of Janus HAR‐MMA can be actuated, so surface wettability can be reversibly switched between superhydrophobic (158°) and hydrophilic (40°) states, based on which a novel magnetically responsive water droplet switch can be realized. Moreover, inspired by the biological assimilatory coloration of chameleons, dynamically color conversion can be skillfully realized by applying different colors on each side of the Janus HAR‐MMA. Finally, as a proof‐of‐concept demonstration in light manipulation, a HAR‐MMA is applied as an optical shutter actuated by external magnetic field with eximious controllability and repeatability. The developed multifunctional HAR‐MMA provides a versatile platform for microfluidic, biomedical, and optical applications.

This paper describes the data release of the LAMOST pilot survey, which includes data reduction, calibration, spectral analysis, data products and data access. The accuracy of the released data and the information about the FITS headers of spectra are also introduced. The released data set includes 319 000 spectra and a catalog of these objects.

Paper has been utilized as an ideal platform for chemical, biological, and mechanical sensing for its fibrous structures and properties in addition to its low cost. However, current studies on pressure-sensitive papers have not fully utilized the unique advantages of papers, such as printability, cuttability, and foldability. Moreover, the existing resistive, capacitive, and triboelectric sensing modalities have long-standing challenges in sensitivity, noiseproofing, response time, linearity, etc. Here, a novel flexible iontronic sensing mechanism, referred to as iontronic sensing paper (ISP), is introduced to the classic paper substrates by incorporating both ionic and conductive patterns into an all-in-one flexible sensing platform. The ISP can then be structured into 2D or 3D tactile-sensitive origamis only by the paper-specific manipulations of printing, cutting, folding, and gluing. Notably, the ISP device possesses a device sensitivity of 10 nF kPa −1 cm −2 , which is thousands of times higher than that of the commercial counterpart, a resolution of 6.25 Pa, a single-millisecond response time, and a high linearity (R 2 > 0.996). Benefiting from the unique properties of the fibrous paper structures and its remarkable performances, the ISP devices hold enormous potential for the emerging human-machine interfaces, including smart packaging, health wearables, and pressure-sensitive paper matrix.

Microrobots have attracted considerable attention due to their extensive applications in microobject manipulation and targeted drug delivery. To realize more complex micro-/nanocargo manipulation (e.g., encapsulation and release) in biological applications, it is highly desirable to endow microrobots with a shape-morphing adaptation to dynamic environments. Here, environmentally adaptive shape-morphing microrobots (SMMRs) have been developed by programmatically encoding different expansion rates in a pH-responsive hydrogel. Due to a combination with magnetic propulsion, a shape-morphing microcrab (SMMC) is able to perform targeted microparticle delivery, including gripping, transporting, and releasing by “opening–closing” of a claw. As a proof-of-concept demonstration, a shape-morphing microfish (SMMF) is designed to encapsulate a drug (doxorubicin (DOX)) by closing its mouth in phosphate-buffered saline (PBS, pH ∼ 7.4) and release the drug by opening its mouth in a slightly acidic solution (pH < 7). Furthermore, localized HeLa cell treatment in an artificial vascular network is realized by “opening–closing” of the SMMF mouth. With the continuous optimization of size, motion control, and imaging technology, these magnetic SMMRs will provide ideal platforms for complex microcargo operations and on-demand drug release.

Inspired by flagellate microorganisms in nature, the microhelix is considered as an ideal model for transportation in fluid environment with low Reynolds number. However, how to promote the swimming and loading capabilities of microhelices with controllable geometries remains challenging. In this study, a novel kind of conical hollow microhelices is proposed and a method is developed to rapidly fabricate these microhelices with controllable parameters by femtosecond vortex beams generated from spatial light modulation along helical scanning. Conical hollow microhelices with designable heights (H = 45–75 µm), diameters (D = 6–18 µm), pitch numbers (Pi = 2–4), taper angles (T = 0.1–0.6 rad), and pitch periods (ΔP = 10–30 µm) are efficiently fabricated. In addition, compared with straight microhelices, the forward swimming capability of conical microhelices increases by 50% and the lateral drift of the conical hollow microhelices is reduced by 70%. Finally, the capabilities of these conical hollow microhelices for nanocargo loading and release by the inner hollow core, as well as transportation of neural stem cells by the outer surface are demonstrated. This work provides new insights into faster and simultaneous transportation of multicargoes for hybrid drug delivery, targeted therapy, and noninvasive surgery in vivo.