Organic solar cells (OSCs) have been widely studied due to the advantages of easy fabrication, low cost, light weight, good flexibility and sufficient transparency. In this work, flexible and semitransparent OSCs were successfully fabricated with the adoption of both polyimide/silver nanowires (PI/AgNW) and a conducting polymer PEDOT:PSS named PH1000 as the transparent conductive electrodes (TCEs). It is demonstrated that PI/AgNW is more suitable as a cathode rather than an anode in the viewpoint of its work function, photovoltaic performance, and simulations of optical properties. It is also found that the light incidence from PH1000 TCE can produce more plasmonic-enhanced photon absorption than the PI/AgNW electrode does, resulting in more high power conversion efficiency. Moreover, a high light transmittance of 33.8% and a decent efficiency of 3.88% are achieved for the whole all-flexible semitransparent device with only 9% decrease of resistance in PI/AgNW after 3000 bending cycles. This work illustrates that PI/AgNW has great potential and bright prospect in large-area OSC applications in the future.
The high-hardness and transparent PMMA-based composites play a significant role in modern optical devices. However, a well-known paradox is that conventional PMMA-based composites with high loadings of nanoparticles usually possess high surface hardness at the cost of poor transparency and toughness due to the aggregation of nanoparticles. In this work, ideal optical materials (SiO2/PMMA composites) with high transparency and high surface hardness are successfully fabricated through the introduction of the flow modifier Si-DPF by conventional melt blending. Si-DPF with low surface energy and high transparency, which is located at the SiO2/PMMA interface, and nano-SiO2 particles are homogeneously dispersed in the PMMA matrix. As an example, the sample SiO2/PMMA/Si-DPF (30/65/5) shows outstanding transparency (>87.2% transmittance), high surface hardness (462.2 MPa), and notched impact strength (1.18 kJ/m2). Moreover, SiO2/PMMA/Si-DPF (30/65/5) also presents a low torque value of composite melt (21.7 N⋅m). This work paves a new possibility for the industrial preparation of polymer-based composites with excellent transparency, surface hardness, processability, and toughness.
Dielectric encapsulation materials are promising for solar cell areas, but the unsatisfactory light‐management capability and relatively poor dielectric properties restrict their further applications in photovoltaic and microelectronic devices. Herein, an interface fusion strategy to engineer the interface of MOF (UiO‐66‐NH2) with anhydride terminated imide oligomer (6FDA‐TFMB) is designed and a novel MOF cluster (UFT) with enhanced forward scattering and robust porosity is prepared. UFT is applied as an optical and dielectric modifier for bisphenol A epoxy resin (DGEBA), and UFT epoxy composites with high transmittance (>80%), tunable haze (45–58%) and excellent dielectric properties can be prepared at low UFT contents (0.5–1 wt%), which delivers an optimal design for dielectric encapsulation systems with efficient light management in solar cells. Additionally, UFT epoxy composites also show excellent UV blocking, and hydrophobic, thermal and mechanical properties. This work provides a template for the synthesis of covalent bond‐mediated nanofillers and for the modulation of haze and dielectric properties of dielectric encapsulation materials for energy systems, semiconductors, microelectronics, and more.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.