The production of clean and renewable hydrogen through water splitting using photocatalysts has received much attention due to the increasing global energy crises. In this study, a high efficiency of the photocatalytic H(2) production was achieved using graphene nanosheets decorated with CdS clusters as visible-light-driven photocatalysts. The materials were prepared by a solvothermal method in which graphene oxide (GO) served as the support and cadmium acetate (Cd(Ac)(2)) as the CdS precursor. These nanosized composites reach a high H(2)-production rate of 1.12 mmol h(-1) (about 4.87 times higher than that of pure CdS nanoparticles) at graphene content of 1.0 wt % and Pt 0.5 wt % under visible-light irradiation and an apparent quantum efficiency (QE) of 22.5% at wavelength of 420 nm. This high photocatalytic H(2)-production activity is attributed predominantly to the presence of graphene, which serves as an electron collector and transporter to efficiently lengthen the lifetime of the photogenerated charge carriers from CdS nanoparticles. This work highlights the potential application of graphene-based materials in the field of energy conversion.

Bright two-photon fluorescent probes are highly desirable to be able to optically probe biological activities deep inside living organisms with larger imaging depth, minor autofluorescence background, and less photodamage. In this study, we report the biocompatible nitrogen-doped graphene quantum dots (N-GQDs) as efficient two-photon fluorescent probes for cellular and deep-tissue imaging. The N-GQD was prepared by a facile solvothermal method using dimethylformamide as a solvent and nitrogen source. The two-photon absorption cross-section of N-GQD reaches 48,000 Göppert-Mayer units, which far surpasses that of the organic dyes and is comparable to that of the high performance semiconductor QDs, achieving the highest value ever reported for carbon-based nanomaterials. More importantly, a study of penetration depth in tissue phantom demonstrates that the N-GQD can achieve a large imaging depth of 1800 μm, significantly extending the fundamental two-photon imaging depth limit. In addition, the N-GQD is nontoxic to living cells and exhibits super photostability under repeated laser irradiation. The high two-photon absorption cross-section, large imaging depth, good biocompatibility, and extraordinary photostability render the N-GQD an attractive alternative probe for efficient two-photon imaging in biological and biomedical applications.

Opening and tuning an energy gap in graphene are central to many electronic applications of graphene. Here we report N-doped graphene obtained by NH3 annealing after N(+)-ion irradiation of graphene samples. First, the evolution of the graphene microstructure was investigated following N(+)-ion irradiation at different fluences using Raman spectroscopy, showing that defects were introduced in plane after irradiation and then restored after annealing in N2 or in NH3. Auger electron spectroscopy (AES) of the graphene annealed in NH3 after irradiation showed N signal, however, no N signal was observed after annealing in N2. Last, the field-effect transistor (FET) was fabricated using N-doped graphene and monitored by the source-drain conductance and back-gate voltage (Gsd-Vg) curves in the measurement. The transport property changed compared to that of the FET made by intrinsic graphene, that is, the Dirac point position moved from positive Vg to negative Vg, indicating the transition of graphene from p-type to n-type after annealing in NH3. Our approach, which provides a physical mechanism for the introduction of defect and subsequent hetero dopant atoms into the graphene material in a controllable fashion, will be promising for producing graphene-based devices for multiple applications.

Design and preparation of efficient artificial photosynthetic systems for harvesting solar energy by production of hydrogen from water splitting is of great importance from both theoretical and practical viewpoints. ZnS-based solid solutions have been fully proved to be an efficient visible-light driven photocatalysts, however, the H(2)-production rate observed for these solid solutions is far from exciting and sometimes an expensive Pt cocatalyst is still needed in order to achieve higher quantum efficiency. Here, for the first time we report the high solar photocatalytic H(2)-production activity over the noble metal-free reduced graphene oxide (RGO)-Zn(x)Cd(1-x)S nanocomposite prepared by a facile coprecipitation-hydrothermal reduction strategy. The optimized RGO-Zn(0.8)Cd(0.2)S photocatalyst has a high H(2)-production rate of 1824 μmol h(-1) g(-1) at the RGO content of 0.25 wt % and the apparent quantum efficiency of 23.4% at 420 nm (the energy conversion efficiency is ca. 0.36% at simulated one-sun (AM 1.5G) illumination). The results exhibit significantly improved photocatalytic hydrogen production by 450% compared with that of the pristine Zn(0.8)Cd(0.2)S, and are better than that of the optimized Pt-Zn(0.8)Cd(0.2)S under the same reaction conditions, showing that the RGO-Zn(0.8)Cd(0.2)S nanocomposite represents one of the most highly active metal sulfide photocatalyts in the absence of noble metal cocatalysts. This work creates a green and simple way for using RGO as a support to enhance the photocatalytic H(2)-production activity of Zn(x)Cd(1-x)S, and also demonstrates that RGO is a promising substitute for noble metals in photocatalytic H(2)-production.

Visible light photocatalytic H(2) production through water splitting is of great importance for its potential application in converting solar energy into chemical energy. In this study, a novel visible-light-driven photocatalyst was designed based on photoinduced interfacial charge transfer (IFCT) through surface modification of ZnS porous nanosheets by CuS. CuS/ZnS porous nanosheet photocatalysts were prepared by a simple hydrothermal and cation exchange reaction between preformed ZnS(en)(0.5) nanosheets and Cu(NO(3))(2). Even without a Pt cocatalyst, the as-prepared CuS/ZnS porous nanosheets reach a high H(2)-production rate of 4147 μmol h(-1) g(-1) at CuS loading content of 2 mol % and an apparent quantum efficiency of 20% at 420 nm. This high visible light photocatalytic H(2)-production activity is due to the IFCT from the valence band of ZnS to CuS, which causes the reduction of partial CuS to Cu(2)S and thus enhances H(2)-production activity. This work not only shows a possibility for substituting low-cost CuS for noble metals in the photocatalytic H(2) production but also for the first time exhibits a facile method for enhancing H(2)-production activity by photoinduced IFCT.

Hydrogen production from solar water splitting has been considered as an ultimate solution to the energy and environmental issues. Over the past few years, graphene has made great contribution to improving the light-driven hydrogen generation performance. This article provides a comprehensive overview of the recent research progress on graphene-based materials for hydrogen evolution from light-driven water splitting. It begins with a brief introduction of the current status and basic principles of hydrogen generation from solar water splitting, and tailoring properties of graphene for application in this area. Then, the roles of graphene in hydrogen generation reaction, including an electron acceptor and transporter, a cocatalyst, a photocatalyst, and a photosensitizer, are elaborated respectively. After that, the comparison between graphene and other carbon materials in solar water splitting is made. Last, this review is concluded with remarks on some challenges and perspectives in this emerging field.

The ORCID identification number(s) for the author(s) of this article can be found under https://doi.org/10.1002/adma.201804838.The emergence and global spread of bacterial resistance to currently available antibiotics underscore the urgent need for new alternative antibacterial agents. Recent studies on the application of nanomaterials as antibacterial agents have demonstrated their great potential for management of infectious diseases. Among these antibacterial nanomaterials, carbon-based nanomaterials (CNMs) have attracted much attention due to their unique physicochemical properties and relatively higher biosafety. Here, a comprehensive review of the recent research progress on antibacterial CNMs is provided, starting with a brief description of the different kinds of CNMs with respect to their physicochemical characteristics. Then, a detailed introduction to the various mechanisms underlying antibacterial activity in these materials is given, including physical/mechanical damage, oxidative stress, photothermal/photocatalytic effect, lipid extraction, inhibition of bacterial metabolism, isolation by wrapping, and the synergistic effect when CNMs are used in combination with other antibacterial materials, followed by a summary of the influence of the physicochemical properties of CNMs on their antibacterial activity. Finally, the current challenges and an outlook for the development of more effective and safer antibacterial CNMs are discussed.

Graphene, a new material for the electron-device community, has many extraordinary properties. Especially, it provides a perfect platform to explore the unique electronic property in absolutely two-dimensions. However, most electronic applications are handicapped by the absence of a semiconducting gap in pristine graphene. To control the semiconducting properties of graphene, doping is regarded as one of the most feasible methods. Herein, a brief review is given on the recent research progress of graphene doping, which is roughly divided into three categories: First, the hetero atom doping, including arc discharge, chemical vapor deposition, electrothermal reaction and ion-irradiation approaches; Second, the chemical modification strategy; Third, the method of electrostatic field tuning. In addition, the various potential applications of the above doping methods are also introduced.