Gantry robots and anthropomorphic arms of various sizes have already been studied and, while they are in use in some parts of the world for automated construction, a new kind of wide workspace machinery, cable-driven parallel robots (CDPR), has emerged. These robots are capable of automated movement in a very wide workspace, using cables reeled in and out by winches as actuation members, the other elements being easily stacked for easy relocation and reconfiguration, which is critical for on-site construction. The motivation of this paper is to showcase the potential of a CDPR operating solely on motor position sensors and showing limited collisions from the cables for large-scale applications in the building industry relevant for additive manufacturing, without risk of collisions between the cables and the building. The combination of the Cogiro CDPR (Tecnalia, LIRMM-CNRS 2010) with the extruder and material of the Pylos project (IAAC 2013) opens the opportunity to a 3D printing machine with a workspace of 13.6 9 9.4 9 3.3 m. The design patterns for printing on such a large scale are disclosed, as well as the modifications that were necessary for both the Cogiro robot and Pylos extruder and material. Two prints, with different patterns, have been achieved with the Pylos extruder mounted on Cogiro: the first spanning 3.5 m in length, the second, reaching a height of 0.86 m. Based on this initial experiment, plans for building larger parts and buildings are discussed, as well as other possible applications for CDPRs in construction, such as the manipulation of assembly processes (windows, lintels, beams, floor elements, curtain wall modules, etc.) or brick laying.

Picturing the interest of research institutions and industrial actors, the list of research and demonstration parallel cable-driven robot prototypes is growing by the day. LIRMM and Tecnalia have decided to put knowledge in common in order to develop novel concepts for cable-driven parallel robotics and demonstrate its capabilities in industrial tasks. We have developed together a reconfigurable cable robot for this purpose. The robot main characteristics, e.g. footprint, mobile platform geometry and drawing point layout can be modified at will, making it particularly suitable for studying in good conditions new configurations or novel control laws, as well as any scenario suggested by our partners. The present paper first provides an overview of the robot. Afterwards, a more specific view on the different components and the capabilities of reconfiguration are presented, as well as examples of layouts meant for various research and industrial projects.

In order to use a cable-driven parallel robot to inspect an existing surface, a straightforward solution consists in fixing the robot components on this surface. In most cases, however, there are conditions that limit these fixations, for example structural reasons since the frame of the surface has probably not been specifically calculated to withstand the forces generated by the parallel cable-driven robot. In the particular case of inspection of the façade of a building, civil engineering specifications apply, which may drastically reduce the engineering possibilities from the point of view of the parallel cable-driven robot designers. This paper introduces a detailed example of implementation of a parallel cable-driven robot on the Media-TIC building located in Barcelona in Spain. In this highly technological building, the main façade parallel cable-driven robot in intended to work as a sensor for monitoring the environment, but also as an interface between the building and its occupiers. The various constraints-due to normative, structural and aesthetic reasons-that were tackled are described in the paper, along with the elected detailed design of the robot that complies with these constraints.

A continuous collision checking method for a cable-driven parallel robot with an embarked robotic arm is proposed in this paper. The method aims at validating paths by checking for collisions between any pair of robot bodies (mobile platform, cables, and arm links). For a pair of bodies, an upper bound on their relative velocity and a lower bound on the distance between the bodies are computed and used to validate a portion of the path. These computations are done repeatedly until a collision is found or the path is validated. The method is integrated within the Humanoid Path Planner (HPP) software, tested with the cable-driven parallel robot CoGiRo, and compared to a discretized validation method.

No abstract