No abstract

The interactions between playa hydrology and playa-surface sediments are important factors that control the type and amount of dust emitted from playas as a result of wind erosion. The production of evaporite minerals during evaporative loss of near-surface ground water results in both the creation and maintenance of several centimeters or more of loose sediment on and near the surfaces of wet playas. Observations that characterize the texture, mineralogic composition and hardness of playa surfaces at Franklin Lake, Soda Lake and West Cronese Lake playas in the Mojave Desert (California), along with imaging of dust emission using automated digital photography, indicate that these kinds of surface sediment are highly susceptible to dust emission. The surfaces of wet playas are dynamic -surface texture and sediment availability to wind erosion change rapidly, primarily in response to fluctuations in water-table depth, rainfall and rates of evaporation. In contrast, dry playas are characterized by ground water at depth. Consequently, dry playas commonly have hard surfaces that produce little or no dust if undisturbed except for transient silt and clay deposited on surfaces by wind and water. Although not the dominant type of global dust, salt-rich dusts from wet playas may be important with respect to radiative properties of dust plumes, atmospheric chemistry, windborne nutrients and human health. Lake playas) in the Mojave Desert are dynamic and at times are vulnerable to wind erosion and dust emission when sufficiently soft and (or) loose. Surface sediments at dry playas, on the other hand, are typically stable and hard and thus generally do not emit large amounts of dust when undisturbed by human activities. The emphasis of this report is on the hydrologic and sedimentologic interactions that may sustain dust production from wet playas. Wet and Dry Playas -Definitions and CharacteristicsPlayas vary greatly in their geologic and hydrologic settings, leading to several classification schemes that group playas by sedimentologic or hydrologic characteristics (summarized by Smoot and Lowenstein, 1991;Rosen, 1994;Gill, 1996). With respect to dust emission from playas, we find useful the distinction between 'wet ' and 'dry' playas (see Rosen, 1994). In a wet playa, ground water is near (typically <5 m) or at the playa surface, through which it is lost by evaporation or fluid outflow (Figure 1(a)). In a dry playa, ground water does not interact with the surface because the water table lies far below the surface (typically >5 m; Figure 1(b)). Both wet and dry playas may receive surface-water runoff.The different hydrological and hydrochemical processes operating at wet and dry playas produce very different surfaces and surficial sediments (see, e.g., Thompson

We present a methodology for conducting a site-specific probabilistic analysis of fault displacement hazard. Two approaches are outlined. The first relates the occurrence of fault displacement at or near the ground surface to the occurrence of earthquakes in the same manner as is done in a standard probabilistic seismic hazard analysis (PSHA) for ground shaking. The methodology for this approach is taken directly from PSHA methodology with the ground-motion attenuation function replaced by a fault displacement attenuation function. In the second approach, the rate of displacement events and the distribution for fault displacement are derived directly from the characteristics of the faults or geologic features at the site of interest. The methodology for probabilistic fault displacement hazard analysis (PFDHA) was developed for a normal faulting environment and the probability distributions we present may have general application in similar tectonic regions. In addition, the general methodology is applicable to any region and we indicate the type of data needed to apply the methodology elsewhere.

Sediment from two deep boreholes ($400 m) approximately 90 km apart in southern Bangladesh was analyzed by X-ray absorption spectroscopy (XAS), total chemical analyses, chemical extractions, and electron probe microanalysis to establish the importance of authigenic pyrite as a sink for arsenic in the Bengal Basin. Authigenic framboidal and massive pyrite (median values 1500 and 3200 ppm As, respectively), is the principal arsenic residence in sediment from both boreholes. Although pyrite is dominant, ferric oxyhydroxides and secondary iron phases contain a large fraction of the sediment-bound arsenic between approximately 20 and 100 m, which is the depth range of wells containing the greatest amount of dissolved arsenic. The lack of pyrite in this interval is attributed to rapid sediment deposition and a low sulfur flux from riverine and atmospheric sources. The ability of deeper aquifers (>150 m) to produce ground water with low dissolved arsenic in southern Bangladesh reflects adequate sulfur supplies and sufficient time to redistribute the arsenic into pyrite during diagenesis. Published by Elsevier Ltd.