No abstract

Deposition profiles of tungsten released from the outer divertor were studied in JT-60U. A neutron activation method was used for the first time to accurately measure deposited tungsten. Surface density of tungsten in the thick carbon deposition layer can be measured by this method. Tungsten was mainly deposited on the inner divertor (around inner strike points) and on the outer wing of the dome. Toroidal distribution of the W deposition was significantly localized near the tungsten released position, while other metallic impurities such as Fe, Cr, Ni were distributed more uniformly. These data indicate that inward drift in the divertor region played a significant role in tungsten transport in JT-60U.

No abstract

No abstract

Modification of JT-60 as a full superconducting tokamak (JT-60SC) is planned. The objectives of the JT-60SC programme are to establish scientific and technological bases for steady-state operation of high performance plasmas and utilization of reduced-activation materials in an economically and environmentally attractive DEMO reactor. Advanced fusion technologies relevant to the DEMO reactor have been developed for the superconducting magnet technology and plasma facing components of the JT-60SC design. To achieve a high current density in a superconducting strand, Nb 3 Al strands with a high copper ratio of 4 have been newly developed for the toroidal field coils (TFCs) of JT-60SC. The R&D to demonstrate the applicability of the Nb 3 Al conductor to TFCs by a react-and-wind technique has been carried out using a full-size Nb 3 Al conductor. A full-size NbTi conductor with low ac loss using Ni-coated strands has been successfully developed. A forced cooling divertor component with high heat transfer using screw tubes has been developed for the first time. The heat removal performance of the carbon fibre composite target was successfully demonstrated on an electron beam irradiation stand.