Single-phased ferroelectromagnet BiFeO3 ceramics with high resistivity were synthesized by a rapid liquid phase sintering technique. Saturated ferroelectric hysteresis loops were observed at room temperature in the ceramics sintered at 880 °C for 450 s. The spontaneous polarization, remnant polarization, and the coercive field are 8.9 μC/cm2, 4.0 μC/cm2, and 39 kV/cm, respectively, under an applied field of 100 kV/cm. It is proposed that the formation of Fe2+ and an oxygen deficiency leading to the higher leakage can be greatly suppressed by the very high heating rate, short sintering period, and liquid phase sintering technique. The latter was also found effective in increasing the density of the ceramics. The sintering technique developed in this work is expected to be useful in synthesizing other ceramics from multivalent or volatile starting materials.

The copper silver selenide has two phases: the low-temperature semimetal phase (α-CuAgSe) and high-temperature phonon-glass superionic phase (β-CuAgSe). In this work, the electric transport and thermoelectric properties of the two phases are investigated. It is revealed that the β-CuAgSe is a p-type semiconductor and exhibits low thermal conductivity while the α-CuAgSe shows metallic conduction with dominant n-type carriers and low electrical resistivity. The thermoelectric figure of merit zT of the polycrystalline β-CuAgSe at 623 K is ~0.95, suggesting that superionic CuAgSe can be a promising thermoelectric candidate in the intermediate temperature range.

The thermoelectric performance of materials relies substantially on the band structures that determine the electronic and phononic transports, while the transport behaviors compete and counter-act for the power factor PF and figure-of-merit ZT. These issues make a full-scale computation of the whole set of thermoelectric parameters particularly attractive, while a calculation scheme of the electronic and phononic contributions to thermal conductivity remains yet challenging. In this work, we present a full-scale computation scheme based on the first-principles calculations by choosing a set of doped half-Heusler compounds as examples for illustration. The electronic structure is computed using the WIEN2k code and the carrier relaxation times for electrons and holes are calculated using the Bardeen and Shockley’s deformation potential (DP) theory. The finite-temperature electronic transport is evaluated within the framework of Boltzmann transport theory. In sequence, the density functional perturbation combined with the quasi-harmonic approximation and the Klemens’ equation is implemented for calculating the lattice thermal conductivity of carrier-doped thermoelectric materials such as Ti-doped NbFeSb compounds without losing a generality. The calculated results show good agreement with experimental data. The present methodology represents an effective and powerful approach to calculate the whole set of thermoelectric properties for thermoelectric materials.