The viability of algae-based biodiesel industry depends on the selection of adequate strains in regard to profitable yields and oil quality. This work aimed to bioprospecting and screening 12 microalgae strains by applying, as selective criteria, the volumetric lipid productivity and the fatty acid profiles, used for estimating the biodiesel fuel properties. Volumetric lipid productivity varied among strains from 22.61 to 204.91 mg l −1 day −1 . The highest lipid yields were observed for Chlorella (204.91 mg l −1 day 1 ) and Botryococcus strains (112.43 and 98.00 mg l −1 day −1 for Botryococcus braunii and Botryococcus terribilis, respectively). Cluster and principal components analysis analysis applied to fatty acid methyl esters (FAME) profiles discriminated three different microalgae groups according to their potential for biodiesel production. Kirchneriella lunaris, Ankistrodesmus fusiformis, Chlamydocapsa bacillus, and Ankistrodesmus falcatus showed the highest levels of polyunsaturated FAME, which incurs in the production of biodiesels with the lowest (42.47-50.52) cetane number (CN), the highest (101.33-136.97) iodine values (IV), and the lowest oxidation stability. The higher levels of saturated FAME in the oils of Chlamydomonas sp. and Scenedesmus obliquus indicated them as source of biodiesel with higher oxidation stability, higher ). The third group, except for the Trebouxyophyceae strains that appeared in isolation, are composed by microalgae that generate biodiesel of intermediate values for CN, IV, and oxidation stability, related to their levels of saturated and monosaturated lipids. Thus, in this research, FAME profiling suggested that the best approach for generating a microalgae-biodiesel of top quality is by mixing the oils of distinct cell cultures.

The streams from municipal wastewater treatment plants (WWTP) have been considered a valuable medium for mass cultivation of algal biomass. The aim of this work is to test and compare the performance of Chlorella vulgaris on several streams from five stages, from two different WWTP. The results showed biomass yields ranging from 39 to 195mg dry-weightl(-1)days(-1). The best performance as biomass production was obtained with the centrate (effluent from drying the anaerobic sludge). After testing a wide range of N/P ratios with centrate, the highest productivity and growth rates were obtained with the original N/P ratio (2.0) of this stream. The highest removal rates were of 9.8 (N) and 3.0 (P) mgl(-1)days(-1), in the centrate. Finally, this research also suggests that microalgal production seems to be a promising process when coupled to wastewater treatment.

Despite certain environmental advantages over fossil diesel, land crop-derived biodiesels may not satisfy the increasing worldwide demand for transportation fuels. As an abundant photosynthesizer, algae could be an adequate surrogate for biodiesel production. Nevertheless, high production costs, scarce selected species, and inaccurate assumptions about production yields represent industrial uncertainties. In this study, a reliable approach to analyzing algal biodiesel production has been developed based on species-to-species variations in oil productivity and quality. This approach compares biodiesels from Chlorophyta strains with land crop feedstock according to (i) potential yields, (ii) oil quality, and (iii) compliance with biodiesel quality standards. Algal yields were assessed by (i) extrapolating the strain-specific laboratory results to commercial-scale growth systems; (ii) converting volumetric to areal biomass productivity; and (iii) estimating oil yields for each strain, as the product of their projected areal biomass productivity for each growth system, and the oil percentage in biomass as determined in the laboratory. Biodiesel fuel properties were estimated by using fatty acid methyl ester profile predictive models. The Chlorophyta strains in this study provided annual oil yields that were generally higher than those of land crops by one order of magnitude. Six strains yielding more than 40 mg oil l −1 day −1 were identified as adequate for sustaining biodiesel production. Trebouxiophyceae algae were the most productive. Critical biodiesel parameters from both feedstock types suggest that most microalgae-derived biodiesels meet international fuel quality standards with better values than those of land crops. Because some of the highly productive feedstock does not simultaneously meet all the standards for a high quality biodiesel, optimization solutions are discussed.

Highest biomass and lipid productivities where achieved at mixotrophic cultivation. Lipids from mixotrophic biomass were more suitable for biodiesel production. Nutrient removal achieved below the most strict threshold limits. Positive energy production scenarios can be designed coupling distinct processes.

Types and frequencies of pathologies were investigated in Crassostrea rhizophorae before and following heavy oyster mortality in Todos OS Santos Bay, Bahia, Brazil. The sporozoan Nematopsis sp. was the only parasite present in sufficient numbers to be an important mortality factor, but the intensity of Nematopsis infections remained low until after the major die-off. Pathologies such as ceroidosis, reduction or loss of stored glycogen, decreased gametogenesis, edema, and metaplasia of the digestive diverticula were consistent with the hypothesis of an external environmental stress factor that may have caused feeding to cease, the resultant weakness contributing to high mortalities. 8, 1986 Academic Press. Inc.