Model poly(glycerol monomethacrylate)-based macromonomers have been used to prepare sterically stabilized polystyrene latexes by either aqueous emulsion or alcoholic dispersion polymerization, affording mean latex diameters of approximately 107 or 1188 nm respectively as judged by dynamic light scattering. Such PGMA50−PS latexes have appropriate surface wettability to stabilize 25−250 μm oil-in-water Pickering emulsions, depending on the latex concentration and oil type. Colloidosomes were formed by covalent cross-linking of the hydroxyl-functional stabilizer chains from within the oil droplets using a polymeric diisocyanate (tolylene 2,4-diisocyanate-terminated poly(propylene glycol) [PPG-TDI]. This oil-soluble cross-linker was confined within the oil droplets, allowing colloidosomes to be prepared at 50 vol % solids without any aggregation. The resulting microcapsules survive removal of the internal oil phase using excess alcohol, unlike the noncross-linked Pickering emulsion precursor. These observations confirm the robust nature of these covalently stabilized colloidosomes. A method for controlling the permeability of these colloidosomes by exploiting the solvent properties of binary oil mixtures has also been evaluated. Finally, microcapsule permeability has been explored via dye release experiments. Less permeable microcapsules can be obtained by deposition of polypyrrole onto the colloidosome exterior.

A series of blocked diisocyanates has been synthesized from toluene diisocyante (TDI), isophorone diisocyanate (IPDI), hexamethylene diisocyanate (HDI), 4,4′‐diphenylmethane diisocyanate (MDI) and 2‐butoxyethanol. The synthesis of blocked diisocyanate adducts was confirmed by Fourier transform infrared, 1H NMR, electron impact mass spectrometry and nitrogen analysis. Differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and carbon dioxide evolution were used to determine the minimum de‐blocking temperatures. De‐blocking temperatures determined by these three techniques were found to be in the order DSC > TGA > CO2 evolution. The effect of different metal catalysts on thermal de‐blocking reaction of the blocked diisocyanates was studied, using the carbon dioxide evolution method. It was found that iron(III) oxide has the maximum catalytic activity on de‐blocking. The solubility of the blocked diisocyanate adducts was determined in different solvents. The study revealed that at 30 °C blocked IPDI and HDI adducts show better solubility than adducts based on TDI and MDI. Isocyanate‐terminated prepolymers of blocked diisocyanates and hydroxyl‐terminated polybutadiene (HTPB) were prepared. The storage stability and gelation times of the prepolymers were studied. Results showed that all the diisocyanate‐HTPB compositions are stable at 50 °C for more than three months. However, aliphatic diisocyanate‐HTPB compositions require greater gelation time than aromatic diisocyanate‐HTPB compositions at their respective de‐blocking temperatures. Copyright © 2007 Society of Chemical Industry

Abstract1,3-Bis(arylsulfonyl)-benzimidazolones 1a-d were synthesized by reacting benzimidazolones with arenesulfonyl chlorides in the presence of NaOH. Mono(arylsulfonyl)-benzimidazolone derivatives 5a-c were prepared from benzimidazolone by protecting one of the Natoms with a tert-butoxycarbonyl group followed by arylsulfonylation and deprotection in acidic medium. The antidiabetic activity of three compounds 1a, 1c and 5a has been determined.

No abstract

No abstract