The article discusses the development of technology for directional drilling of oil and gas wells in the perspective of modeling downhole operations. The most significant mathematical models developed by Soviet and foreign scientists in the XX century are listed. An example of calculating the reaction on a bit based on the most widely used method of initial parameters is shown. In the process of a typical calculation of the deflecting force on the bit, it was possible to set the boundary conditions on the bottom hole assembly (BHA) supports in a natural form, using a well-known approach for calculating the deflection of the beam. The obtained results of calculations were applied in the construction of a simulation model for computer simulation based on a virtual program-simulator of the drilling directional wells. The simulating software allowed us to evaluate the effect of the Zenith angle of the well and the rigidity of the oriented layout on the deflecting force on the bit, the deflection of the turbo drill along the length from the bit to the nearest lower point of contact of the well wall.
Most of the main types of complications in the process of drilling wells, such as collapses, taluses, collapses of the walls, the formation of caverns, etc., are associated with external mechanical and hydrodynamic effects on the walls of the wellbore. Therefore, ensuring the stability of the borehole walls is one of the urgent and difficult technological formation fluid pressure on mechanical processes in rocks when they are opened with a directional well, especially of horizontal wells. This article provides solutions to problems associated with hydraulic fracturing of a well and the condition of its prevention, calculation of generalized stresses in the rock formation for inclined well. As a result of this calculations, the necessary data are obtained for making a decision on the density of the drilling fluid to drilling the considered interval of rocks, as well as for making other technological decisions. The given calculation formulas make it possible to fully evaluate the effect of the formation fluid pressure on the mechanical processes in the rocks when they are opened by a horizontal well. Keywords: hydraulic fracturing; blade bit; steel ball-shaped toothed bit; polycrystalline diamond bit; laser drilling; impact rope drilling; rotary drilling.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.