No abstract

No abstract

This paper presents and compares two permanent magnet vernier (PMV) motors with fractional slot concentrated windings (FSCWs) and integral slot distributed windings (ISDWs). The ISDW PMV motor is newly proposed and optimized for a fair comparison with the existing FSCW one. The equations of back electromotive force of both motors are investigated and derived showing that the ISDW PMV motor has the potential to obtain higher torque capability. Also, their electromagnetic performances, such as torque capability, fault tolerance, loss, and efficiency, are calculated and compared by using the finite-element analysis. Then, the maximum power strategy for PMV motors operating at high speed is presented. The simulated results show that both motors possess excellent flux weakening capability. Finally, the effectiveness of the theoretical analysis is verified by the finiteelement analysis results and experiments on a prototype FSCW PMV motor.

No abstract

Abstract:Vehicle active safety control is attracting ever increasing attention in the attempt to improve the stability and the maneuverability of electric vehicles. In this paper, a neural network combined inverse (NNCI) controller is proposed, incorporating the merits of left-inversion and right-inversion. As the left-inversion soft-sensor can estimate the sideslip angle, while the right-inversion is utilized to decouple control. Then, the proposed NNCI controller not only linearizes and decouples the original nonlinear system, but also directly obtains immeasurable state feedback in constructing the right-inversion. Hence, the proposed controller is very practical in engineering applications. The proposed system is co-simulated based on the vehicle simulation package CarSim in connection with Matlab/Simulink. The results verify the effectiveness of the proposed control strategy.

No abstract

Multi-phase permanent-magnet (PM) motor is a competitive candidate for application where uninterrupted operation is demanded under fault condition. However, double-phase open-circuit or short-circuit faults result in serious problems, such as high fluctuating-torque, deteriorated dynamic performance, even breakdown. This paper proposes a novel unified decoupling vector control strategy to restrain torque fluctuations and improve dynamic performance for a five-phase PM motor with arbitrary double-phase failures. The novelty of the proposed strategy is the development of reduced-order orthogonal transformation matrices and remedies voltages, and then the smooth operation with vector control strategy can be achieved under double-phase open-circuit or short-circuit fault condition. The decoupled motor model in the synchronous rotating frame is achieved by the combination of the reduced-order orthogonal transformation matrices deduced from the optimal fault-tolerant currents and the remedy voltages. The torque fluctuations cancellation is achieved by the remedy voltages. This control strategy exhibits the improved dynamic performance with smooth torque of the faulty PM motor. The experimental results are presented to verify the feasibility of the proposed strategy. INDEX TERMS Five-phase permanent-magnet motor, fault-tolerant control, reduced-order orthogonal transformation matrix, remedy voltage, double-phase faults, vector control.

Active suspension has not been popularized for high energy consumption. To address this issue, this paper introduces the concept of a new kind of suspension. The linear motor is considered to be integrated into an adjustable shock absorber to form the hybrid active semiactive suspension (HASAS). To realize the superiority of HASAS, its energy consumption and regeneration mechanisms are revealed. And the system controller which is composed of linear quadratic regulator (LQR) controller, mode decision and switch controller, and the sliding mode control based thrust controller is developed. LQR controller is designed to maintain the suspension control objectives, while mode decision and switch controller decides the optimal damping level to tune motor thrust. The thrust controller ensures motor thrust tracking. An adjustable shock absorber with three regulating levels to be used in HASAS is trial produced and tested to obtain its working characteristics. Finally, simulation analysis is made with the experimental three damping characteristics. The impacts of adjustable damping on the motor force and energy consumption are investigated. Simulation results demonstrate the advantages of HASAS in energy conservation with various suspension control objectives. Even self-powered active control and energy regenerated to the power source can be realized.